Complex study of nickel skeleton catalysts: V. Study of novel non-pyrophoric nickel skeleton catalysts by derivatograph

The structure and properties of non-pyrophoric skeleton catalysts prepared from NiSi, NiAlSi, NiMg and NiZn alloys have been studied—apart from other thermal methods—by means of the derivatograph.Our experimental results have contributed to the explanation of the non-pyrophoric behaviour of these catalysts. We demonstrated that the desorption of the hydrogen content in our catalysts is not accompanied by the oxidation of active nickel. This oxidation takes place only at higher temperatures, above 200°C, at a rate proportional to the amount of active nickel.Other constituents of the catalysts (adsorbed water, hydroxide content) were also determined from the experimental data. The outstandingly high Mg(OH)₂ content of the NiMg catalyst indicates that its structure is dissimilar: Mg(OH)₂ also acts as support for the catalyst.     

Isotope gas analysis of tritium-labelled organic compounds based on pyrolytical decomposition

Summary A procedure has been developed for the activity measurement of tritium-labelled organic compounds in the gas phase. The organic compounds are pyrolysed in hydrogen carrier gas at 1150° and the decomposition products are swept through a carbon packing in accordance with the principle of the oxygen determination developed byUnterzaucher andBürger. The radioactive gas mixture obtained from the sample is swept by the hydrogen carrier gas flowing continuously through the reactor into a proportional counter tube, after the addition of propanebutane counter gas. By closure of the counter tube at a suitable moment, the radioactive gas is quantitatively trapped in the counter tube. The activity is measured in the limited proportional region. No memory effect occurs. The preparation of the sample requires 12 minutes; the relative standard deviation of analysis is <0.5%.

---

Zusammenfassung Ein Verfahren zur Aktivitätsbestimmung bei tritium-markierten organischen Verbindungen in der Gasphase wurde ausgearbeitet. Die organischen Substanzen werden in Wasserstoff als Trägergas bei 1150° pyrolysiert. Die Zersetzungsprodukte werden wie bei der Sauerstoffbestimmung nachUnterzaucher bzw.Bürger über eine Kohleschicht geleitet. Das radioaktive Gas-gemisch aus der Probe gelangt mit dem kontinuierlich strömenden Trägergas in ein Proportionalzählrohr, nachdem Propan-Butan-Zählgas zugesetzt wurde. Man schließt das Zählrohr im richtigen Augenblick, um das radioaktive Gas quantitativ zu erfassen. Die Aktivität wird im Proportionalbereich gemessen. Ein Memory-Effekt tritt nicht auf. Die Vorbereitung der Probe beansprucht 12 Minuten. Die relative Standardabweichung ist kleiner als 0,5%.

     

L X-ray production cross sections, average L shell fluorescence yield and intensity ratios in heavy elements

L X-ray fluorescence cross sections, and intensity ratios were measured for elements in the 70￡Z￡92 atomic range at the excitation energy 59.5 keV using a Si(Li) detector. Furthermore, L X-ray fluorescence cross sections and intensity ratios were calculated for elements in the same range. The average L shell fluorescence yields were derived using experimental L X-ray fluorescence cross sections and theoretical photoionization cross sections. The obtained results were compared with other experimental and theoretical values. This revised version was published online in August 2006 with corrections to the Cover Date.     

A non local density functional calculation of the diamagnetic susceptibilities and other electronic properties of noble gases and closed-shell ions

The non local weighted-density approximation (WDA) to the exchange-correlation potentialV _xc (r) is used to compute electron densities, ionization potentials and electron affinities of several atoms and ions. Especial care is taken in calculating and discussing 〈r ²〉 in noble gas atoms. Good results are obtained for all those quantities, but it is critical that the WDA is applied in such a way that it preserves the correct larger behaviour ofV _xc (r). A comparison of the calculated electron density with that of the Hartree-Fock method shows the effects of coulomb correlation. The density rearrangements upon the introduction of correlation agree qualitatively with the results of Configuration-Interaction calculations     

Crystal structure of 1-[N-2-aminoethyl)-aminopropyl]silatrane

The crystal structure of 1-[N-(2-aminoethyl)aminopropyl]silatrane has been determined by x-ray diffraction at room temperature. The Si←N bond distance (2.165(2) Å) is in the range observed for other 1-X-propylsilatranes (X = CN, OH, SH, Cl and SCN). The structure is partially disordered: the silatrane moiety displays a disorder that is typical for silatranes and the aminoethyl group terminating the planar chain linked to silicon is rotationally disordered.     

Thermal properties of tetrahydroperparine derivatives

The thermal behaviour of tetrahydroperparine (THP) and its derivatives with various acids has been investigated. The acid is liberated from the formate derivative basically in two steps, while the other aliphatic acids are released quantitatively before the thermal decomposition of the THP molecule. The thermoanalytical curves, electrical conductivity data measured in the molten phase, and infrared spectra prove that while part of the formic acid is hydrogen-bonded the other part is bound ionically in the molecule. It may be assumed that the marked biological activity of the compound can be explained by this difference in the nature of the bonds.     

Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.     

Infrared laser ablation study of pressed soil pellets with inductively coupled plasma atomic emission spectrometry

Potential of infrared laser ablation (LA) coupled with ICP-AES as a technique suitable for the determination of trace elements (Zn, Cu, Ni, Cr, and V) in agricultural soils was studied. Operating parameters such as laser beam energy, laser beam focusing with respect to the sample surface, and velocity of the sample translation in the plane perpendicular to the laser beam were optimized. Soil samples were mixed with powdered Ag as a binder, and an internal standard (GeO(2)), and pressed into pellets. Calibration samples were prepared by adding known amounts of oxides of elements of interest into soils of known elemental composition and then processed in the same way as the analyzed samples. Calibration curves were found to be linear at least up to several hundreds of mg kg(-1) for the elements of interest. The elemental contents obtained by using LA-ICP-AES were compared with those obtained by analysis using wet chemistry followed by ICP-AES with pneumatic nebulization (PN). The results were in good agreement. Accuracy was also tested using certified reference soils with a bias not exceeding 10% relative.     

Zwei neue pentacyclische dimere des cycloheptatriens

Titanium - catalyzed dimerization of cycloheptatriene affords pentacyclo[7.5.0.0^2,8.0^5,14.0^7,11]tetradeca-3,12-diene, $\text{3}$, and pentacyclo[8.4.0.0^3,7.0^4,14.0^6,11]tetradeca-8,12-diene, $\text{4}$. By heating, $\text{3}$ is converted quantitatively into $\text{4}$.