A simple laboratory generator for low concentrations of sulphur dioxide

The generator is based on permeation of sulphur dioxide through silicone rubber tubes immersed in a buffered, thermostated solution of sodium hydrogensulphite. The generator contains three (or more) permeation tubes of different lengths immersed simultaneously in the generation solution. The tubes can be connected stepwise to the carrier gas source, so that three (or more) different concentrations of SO₂ in the carrier gas can be obtained from a single solution. The tested generator produced 1.25–25.4 ng s^?1 SO₂, depending on the hydrogensulphite concentration in the solution. Long-term stability was tested for the production of 10.49 ng s^?1 over 50 h; the relative standard deviation was 1.57%. The experimental conditions affecting the production of SO₂ are discussed. An equation is derived for estimating the SO₂ production for various solution compositions and surface areas of the permeation tubes.     

Effects of genesis and ionizing radiation on the kinetics of reduction of NiO-CeO2 mixed oxides with hydrogen

The reduction of mixed oxides NiO-CeO₂ of various composition with hydrogen was studied at 290–470° by means of thermogravimetry. Some physicochemical properties of the system were also investigated and compared with earlier studied analogous samples of different “origin”. The degree of mutual interaction of the two components, the reduction kinetics and the sensitivity to the different sorts of radiation (gamma-rays, fast neutrons and electrons), applied in different doses, are strongly affected by the “pre-history” and by the composition in both compared series of mixed oxides.     

Beitrag zur mikroskopischen Identifizierung organischer Stoffe nach L. Kofler. V

Zusammenfassung In Fortsetzung früherer Untersuchungen zum Zweck der Ergänzung und Erweiterung der Identifizierungs-Tabelle nachKofler werden für 62 Substanzen die thermomikroskopischen Konstanten mitgeteilt und die gegebenenfalls notwendigen Zusatzreaktionen beschrieben. Bei Nicotinamid, das auf Grund seiner Fähigkeit, mit vielen Stoffen wie organischen Säuren, Säureestern, Phenolen u. a. Komplexverbindungen zu bilden, häufig als Reagens in Betracht kommt, wird das polymorphe Verhalten erläutert und das Auftreten von sieben Modifikationen beschrieben.

---

Contribution to the microscopic identification of organic materials after L. Kofler. V

Summary In continuation of earlier investigations for the purpose of supplementing and extending the identification tables ofKofler, the thermomicroscopic constants are given for 62 substances and when necessary the supplementary reactions are described. In the case of nicotinamide, which because of its ability to yield among other things complex compounds with organic acids, acid esters, phenols, is frequently considered as reagent, the complex behavior is illustrated and the occurrence of 7 modifications is described.

     

Thermal Analysis of the System Na3AlF6–NaVO3

Summary. The phase diagram of the system Na₃AlF₆–NaVO₃ was determined by means of thermal analysis. The system is a simple binary eutectic one. The eutectic point was estimated at x(NaVO₃) = 0.975 and t _eut = 617°C. The XRD patterns of samples after thermal analysis revealed the presence of cryolite and NaVO₃ only supporting the above assumption of a simple eutectic binary system.     

Tritium volume activity in natural waters of the NPP Temelín region

With the use of the tritium monitoring network the samples of river water, air humidity and precipitation are collected and analysed for HTO in the vicinity of Temelín nuclear power plant.     

Gold(III) complexes with imidazole,benzoxazole, purine and pyrimidine derivatives

Summary The synthesis and characterization of Au^III complexes with several heterocyclic ligands are reported. The compounds have general formula [AuX₃(L)], where L =N-methylimidazole (N-MeIz),N-ethylimidazole (N-EtIz),N-propylimidazole (N-PrIz), benzoxazole (BO), 2-methylbenzoxazole (2-MeBO), 2,5-dimethylbenzoxazole (2,5-diMeBO), 2-amino-pyrimidine (2-APm), 4(6) -hydroxy-pyrimidine [4(6)-hydrPm] or hypoxanthine (Hypox) and X = Cl or Br. Elemental analysis, conductivity measurements and spectral studies were used for the characterization of the complexes. A square-planar geometry withN-bonded heterocyclic ligands is suggested.     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.     

Study of the drying zirconia gel-precipitates using thermal analysis

Thermoanalytical techniques (TG, DTG, DTA and EGA) can be helpful in studying gel compositions and relating the chemical history and the role of the precipitant to the chemical properties of gels. The objective of our work was to determine the influence of the initial conditions in the reaction mixture on the product characteristics. Zirconia gels were prepared by the gelprecipitation method by the hydrolysis of zirconium tetrachloride dissolved in methanol. The substitution of water by methanol was chosen in order to obtain a reaction medium in which better control of the hydrolysis and condensation reactions of the zirconium precursor were achieved and thus also better control of the final properties of the dried zirconia gel-precipitates could be obtained. The nature of the hydrated zirconia gels obtained during the gelation process is strongly influenced by the conditions of the reaction mixture, e.g. concentration of the zirconium precursor, the mixing rate and particularly by the amount of water added. To distinguish between various types of water in the gel-precipitates, the furnace atmosphere and the partial water pressure were altered appropriately. It was shown that initial zirconium to water molar ratio has a significant effect on the properties of the final products. It was assumed that, according to the preparation conditions, three different types of water are present in the formed zirconia gel-precipitates. Modification of the dehydration processes of zirconia gel-precipitates enables control of the final microstructural and surface properties of the dried gels which are suitable for further catalysts support as well as mixed oxide preparation.     

Generalization of Lagrangian dynamics

We speculate on a generalized dynamics described by an integral over action functionals that is a generalization of the standard functional integral. In a simple Gaussian case we obtain a certain differential equation for the measure of Feynman integral. We prove that the equation is satisfied for the spin zero field in one space-time dimension.