Combining thermal analysis with other techniques to monitor the decomposition of poly(m-phenylene isophthalamide)

The pyrolysis behaviour of Nomex, poly(m-phenylene isophthalamide) fibres under argon has been investigated up to a temperature of 1173 K with different methods to get direct information on the progressive changes taking place in the solid material and its carbon fibre residues. The main stages of the pyrolytic degradation of the fibres were determined by thermal analysis (TG and DTA) and their chemical and morphological evolution through the different steps was subsequently followed by Fourier transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM) measurements, respectively, on samples treated to various temperatures. This revised version was published online in July 2006 with corrections to the Cover Date.     

Ab initio analytical potential energy surface and quasiclassical trajectory study of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+))-->OH(+)(X (3)Sigma(-))+H((2)S) reaction and isotopic variants

An analytical potential energy surface (PES) representation of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+)) system was developed by fitting around 600 CCSD(T)/cc-pVQZ ab initio points. Rate constant calculations for this reaction and its isotopic variants (D(2) and HD) were performed using the quasiclassical trajectory (QCT) method, obtaining a good agreement with experimental data. Calculations conducted to determine the cross section of the title reaction, considering collision energies (E(T)) below 0.3 eV, also led to good accord with experiments. This PES appears to be suitable for kinetics and dynamics studies. Moreover, the QCT results show that, although the hypotheses of a widely used capture model are not satisfied, the resulting expression for the cross section can be applied within a suitable E(T) interval, due to errors cancellation. This could be a general situation regarding the application of this simple model to ion-molecule processes.     

Global optimization of ionic Mg(n)F(2n) (n=1-30) clusters

The global optimization basin-hopping (BH) method has been used to locate the global minima (GM) of Mg(n)F(2n) (n=1-30) clusters using a Born-Mayer-type potential. Some of the GM were particularly difficult to find, requiring more than 1.5 x 10(4) BH steps. We have found that both the binding energy per MgF2 unit and the effective volume of the GM isomers increase almost linearly with n, and that cluster symmetry decreases with cluster size. The data derived from the BH runs reveal a growing density of local minima just above the GM as n increases. Despite this, the attraction basin around each GM is relatively large, since after all their atomic coordinates are randomly displaced by values as high as 2.0 bohrs, the perturbed structures, upon reoptimization, relax back to the GM in more than 50% of the cases (except for n=10 and 11). The relative stabilities derived from energy second differences suggest that n=8,10,13,15, and 20 are probably the magic numbers for these systems. Mass spectrum experiments would be very useful to clarify this issue.     

A study of the electrospray ionisation and ion-trap fragmentation of [M - H](-) ions of new 3,5-disubstituted tetrahydro-2H-1,3,5-thiadiazin-2-thiones

The electrospray ionisation (ESI) in negative mode of the pharmacologically significant 3,5-disubstituted tetrahydro-2H-1,3,5-thiadiazin-2-thiones, and their subsequent fragmentations using an ion-trap mass spectrometer, have been investigated. Experiments on sequential product ion fragmentations (MS(n)) were performed in order to elucidate the degradation pathways for these compounds. The data presented show that the fragmentation of the even-electron [M - H](-) ions could proceed through an internal nucleophilic substitution displacement. Decarboxylation and extrusion of carbon disulfide are other fragmentations observed.     

A new selective cleavage of n,n-dicarbamoyl-protected amines using lithium bromide

A mild and new procedure for the selective cleavage of an alkoxycarbonyl group (Boc, CBz) in N,N-dicarbamoyl-protected amino compounds is described. The method is based on the use of lithium bromide in acetonitrile and is compatible with a large range of other functionalities present in the substrates. Compared with other reported methodologies, the procedure is particularly useful for the Cbz-selective cleavage in N,N-Ts,Cbz-diprotected amines. A rationalization of the selectivity supported by ab initio calculations is also presented.     

Extraction--spectrophotometric determination of oxalate in urine and blood serum

An extraction--spectrophotometric method is described for the determination of oxalate, based on the formation of a mixed ligand vanadium (V)--mandelohydroxamic acid--oxalate complex. The complex was extracted into a solution of trioctylmethylammonium chloride (Adogen 446) in toluene and the absorbance measured at 535 nm. The experimental variables and interferences in this determination were studied. The detection limit is 0.5 microgram ml-1 and the range of application is between 2 and 8 micrograms ml-1. The method was applied to the determination of oxalate in urine and blood serum.     

On the convexity of the sum of the first eigenvalues of operators depending on a real parameter

Let ₁ (k) ₂ (k) be the eigenvalues of an operator of a certain type depending on a real parameterk. The paper shows that under certain requirements on the operator and on the nature of its dependence onk, the sum ₁ (k)++ _N (k) is a concave function ofk, for any positive integerN.

---

Zusammenfassung Seien ₁ (k) ₂ (k) die Eigenwerte eines von einem reellen Parameterk abhängigen Operators. Man zeigt, daß unter gewissen Voraussetzungen über den Operator und seine Abhängigkeit vonk die Summe ₁ (k)++ _N (k) für jedesN eine konkave Funktion vonk ist.

     

Drug release system of ibuprofen in PCL-microspheres

Today, the technology of microencapsulation of active principles is on top of biomedical advances, because through it we can solve many of the problems caused by current methods of taking medication. Active principle microencapsulation not only solves the problems of drug intake but also controls its dosage. In this study was carried out the development of a protocol for the microencapsulation of ibuprofen by solvent evaporation method. A subsequent application of those microencapsulates to biofunctional textile substrates (cotton, polyamide, acrylic, and polyester) using a finishing process, and finally a study of the release of active principle in two different media (deionized water and physiological serum) has been carried out using samples of the treated fabrics that were submerged into a thermostatized vessel at semi-infinite bath conditions. The determination of active principles released to the bath was determined by a UV spectrophotometer. These experimental results have been analyzed and evaluated, and have therefore allowed to define a controlled drug release system by Fickian diffusion in different media.     

Biodegradable aromatic copolyesters made from bicyclic acetalized galactaric acid

Random poly(hexamethylene terephthalate‐co‐galactarate)s and poly(dodecamethylene terephthalate‐co‐galactarate)s copolyesters covering the whole range of compositions were obtained with weight‐average molecular weights of ～30,000–50,000 g mol^?1 by melt polycondensation. They were thermally stable above 300 °C, and displayed T_g in the +20 to ?20 °C range with values steadily decreasing with the content in galactarate units. All the copolyesters were semicrystalline with T_m between 50 and 150 °C and those made from dodecanediol were able to crystallize from the melt at a crystallization rate depending on composition. Copolyesters containing up to 50% of galactaric units retained the crystal structure of their respective polyterephthalate homopolyesters, whereas they adopted the structure of the respective polygalactarates when the content in Galx units reached 70%. Stress‐strain essays revealed decay in the mechanical parameters as the aromatic units were replaced by Galx. Incubation in aqueous buffer revealed that hydrolysis of the polyesters were largely enhanced by copolymerization and evidenced the capacity of the Galx unit for making aromatic polyesters susceptible to biodegradation. A detailed NMR analysis complemented by SEM observations indicated that hydrolysis took place by preferred splitting of galactarate ester bonds with releasing of alkanediol and Galx‐diacid. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012