Hydrogen Bonding in Polyurethane-Silica Nanocomposites

Thin films of polyester-based polyurethane-silica nanocomposites with 34% hard segments and different concentrations of nano SiO₂ filler (0, 0.5, 1.0 and 3 vol.%) have been prepared. The hydrogen bonding and orientational behaviour of hard and soft segments were analysed using infrared linear dichroic measurements. The number of hydrogen bonded NH and CO groups and orientation function were calculated from polarized FTIR spectra. The presence of nanosilica slightly increased the number of hydrogen bonded carbonyls. The soft segments in nanocomposite films display increased orientation in comparison to the neat polymer film. The addition of 3% nanosilica significantly reduced elongation at break. The results were compared with hydrogen bonding and orientational behaviour of thin film of polyether-based silica nanocomposites.     

Novel Copolymers of Styrene and Some Ring‐Substituted 2‐Cyano‐N,N‐Dimethyl‐3‐Phenyl‐2‐Propenamides

Electrophilic trisubstituted ethylene monomers, ring‐substituted 2‐cyano‐N,N‐dimethyl‐3‐phenyl‐2‐propenamides, RC₆H₄CH?C(CN)CON(CH₃)₂ (where R is 3‐benzyloxy, 4‐benzyloxy, 3‐ethoxy‐4‐methoxy, 3‐bromo‐4‐methoxy, 5‐bromo‐2‐methoxy, 2‐chloro‐6‐fluoro) were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and N,N‐dimethyl cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 300–450°C range.     

High‐pressure Raman spectroscopic and other structural studies of hydrotalcites containing intercalated dicarboxylic acid anions

The results of pressure‐tuning Raman spectroscopic, X‐ray powder diffraction and solid‐state ¹³C‐NMR studies of selected dicarboxylate anions intercalated in a Mg–Al layered double hydroxide lattice are reported. The pressure dependences of the vibrational modes are linear for pressures up to 4.6 GPa, indicating that no phase transitions occur. The interlayer spacings show that the oxalate, malonate and succinate dianions are oriented perpendicular to the layers, but the glutarate and adipate are tilted. The solid‐state ¹³C‐NMR spectra of these materials show full chemical shift anisotropy and, therefore, the anions are not mobile at room temperature. Copyright © 2011 John Wiley & Sons, Ltd.     

Aggregation of imine-based metallo-supramolecular architectures through pi-pi interactions

The design of supramolecular architectures based on isoquinoline-imine ligand systems is described. The isoquinoline affords an extended pi surface and the use of this surface to obtain self-recognition and consequent pi-pi aggregation is investigated. The approach is effective in that each of four complexes is observed to aggregate through these interactions. Other pi-pi interactions can interfere with the aggregation indicating that a larger pi-surface may be required to obtain complete control over the aggregation of the units.     

Biomaterials of Poly(vinyl alcohol) and Natural Polymers

Polysaccharides and proteins are abundantly found in nature and are highly recommended for developing eco-friendly materials due to their special properties (biodegradability, biocompatibility, non-toxicity, low cost, etc.). However, they sometimes fail to meet specific requirements due to poor mechanical and physical properties. Poly(vinyl alcohol) (PVA) is one of the promising synthetic polymers with superior properties that can be blended with natural polymers for obtaining novel biomaterials with improved performances. This review addresses recent advance in PVA/polysaccharides and PVA/proteins biocomposites design and fabrication, mainly for the past two decades.     

Synthesis and characterization of new copper(II) complex compounds with chlorhexidine. Part I

Three new copper(II) complex compounds with chlorhexidine diacetate as a ligand have been prepared and characterized by elemental and thermogravimetrical analyses, molar conductances, magnetic susceptibility measurements, infrared, electronic and EPR spectra. The complexes correspond to the formulas: [Cu₂(CHX)Cl₄]·2C₂H₅OH, [Cu₂(CHX)Br₄]·2C₂H₅OH and [Cu₂(CHX)(CH₃COO)₂] (CH₃COO)₂·2C₂H₅OH, where CHX = chlorhexidine, their composition and stereochemistry depending on the reaction conditions and the metal salt used. Chlorhexidine acts as neutral tetradentate NNNN donor, coordinating through the four imine nitrogen atoms. Investigations on antimicrobial activity in vitro show that all the complexes are active against the tested microorganisms, the complex with chloride being more active against Gram negative bacteria than chlorhexidine diacetate..      

Correlations on Phenolic Screening Related to In Vitro and In Ovo Assessment of Ocimum basilicum L. Hydro-Alcoholic Extracts Used as Skin Active Ingredient

The current study was aimed to evaluate the phenolic composition parameters of two hydro-alcoholic extracts of Ocimum basilicum L. (OB) obtained from the aerial part (without leaves) and leaves, in order to determine their contribution to the antioxidant activity (AOA). Both hydro-alcoholic extracts have proven to be rich in polyphenolic compounds, flavonoids, flavonols and tannins. Therefore, the leaves’ extracts reveal an inhibition percentage of 89%, almost comparable with the standard reference (95%). To complete the toxicological profile, the study also assessed the potential cytotoxicity of basil hydro-alcoholic extracts on immortalized human keratinocytes (HaCaT), skin human fibroblasts (1BR3), mice epidermis (JB6Cl41-5a) and primary human melanocytes (HEMa) cells, correlated to A375 antitumor in vitro activity. The extracts did not induce significant cytotoxic effect on any of the selected normal cell lines but showed relevant activity on A375 cells. Considering the low values obtained regarding the irritative effects in the chorionallantoic membrane of the egg on blood vessels, we can emphasize that both extracts can be considered as biocompatible ingredients. Regarding the potential activity of hydro-alcoholic extracts on human skin, the decrease of erythema values after the application of extracts was a relevant observation which indicates the anti-inflammatory potential of Ocimum basilicum L.     

Evaluation of cation influence on the formation of M(II)Cr2O4 during the thermal decomposition of mixed carboxylate type precursors

This paper reports an investigation regarding the influence of the cation M(II) (M = Zn, Ni, Mg) on the formation of MCr₂O₄ by thermal decomposition of the corresponding M(II),Cr(III)-carboxylates (precursors) obtained by redox reaction between the corresponding metal nitrates and 1,3-propanediol. The decomposition products at different temperatures have been characterized by FT-IR spectroscopy and thermal analysis. Thus, we have evidenced that by thermal decomposition of the studied precursors in the range 250–300 °C, different amorphous oxidic phases mixtures form depending on the nature of metalic cation: (Cr₂O_3+x + ZnO) (Cr₂O_3+x + Ni/NiO) and (Cr₂O_3+x+MgO). In case of M = Zn, around 400 °C when the transition Cr₂O_3+x to Cr₂O₃ takes place, zinc chromite nuclei form by the interaction ZnO with Cr₂O₃. In case of M = Ni, due to the partial reduction of Ni(II) at Ni(0) during the thermal decomposition of the precursor the formation of nickel chromite by the reaction NiO + Cr₂O₃ is shifted toward 500 °C, when Ni is oxidized at NiO. The thermal evolution of the mixture (MgO + CrO₃) is different due to the formation as intermediary phase of MgCrO₄, which decomposes to MgCr₂O₄ around 560 °C. In order to investigate the chromites formation mechanism, we have studied the mechanical mixtures of single oxides obtained from the corresponding carboxylates. These mixtures (MO + Cr₂O₃) have been annealed at 400, 500, and 600 °C to study the evolution of the crystalline phases. It results in the prepared mixture behaving different from the mixtures obtained by thermal decomposition of the binary M(II),Cr(III)-carboxylates, recommending our synthesis method for obtaining binary oxides.     

High resolution mass spectrometric characterization of amino linked oligosaccharides — a preliminary study

In this study maltose, maltotriose and maltotetraose were for the first time, coupled to 4,4′-methylenedianiline (MDA). The aim of this preliminary work was to test the feasibility of oligo- and polysaccharide coupling to MDA and the characterization of the coupling products by high resolution mass spectrometry (MS). (+) nanoESI in combination with a quadrupole time of flight (QTOF) MS in full scan (MS) and MS/MS was optimized first on underivatized maltose, maltotriose and maltotetraose. The optimal screening and sequencing conditions were further applied to the MDA-functionalized oligosaccharides. The obtained results revealed a straightforward MS detection of the functionalized oligomers, high sequence coverage and a fragmentation pathway with the formation of B and Y ions as well as the complementary C and Z ions along with a typical cleavage of the aglycon. We consider that this methodology is fully applicable also to polydisperse mixtures of long chain polysaccharides, which due to the large number of components and their size require a systematic method of development and testing.