A cyclic hexacopper(II) fluoro complex that encapsulates two fluoride anions

The complex [[Cu3(HpztBu)4(mu-pztBu)2(mu-F)2(mu 3-F)]2]F2 (HpztBu = 3[5]-tert-butylpyrazole) has a cyclic, C2v-symmetric hexacopper core. The two non-coordinated F- anions are encapsulated within cavities formed by three HpztBu ligands.     

Novel generation of an o-quinone methide from 2-(2'-cyclohexenyl)phenol by excited state intramolecular proton transfer and subsequent C-C fragmentation

Formation of an o-quinone methide via C-C fragmentation of a zwitterion formed by intramolecular excited state proton transfer from an o-allylphenol derivative is reported for the first time.     

A high statistics measurement of the Lambda(+)(c) lifetime

A high statistics measurement of the Lambda(+)(c) lifetime from the Fermilab fixed-target FOCUS photoproduction experiment is presented. We describe the analysis technique with particular attention to the determination of the systematic uncertainty. The measured value of 204.6 +/- 3.4 (stat) +/- 2.5 (syst) fs from 8034 +/- 122 Lambda(+)(c)-->pK(-)pi(+) decays represents a significant improvement over the present world average.     

Application of high-resolution magic-angle spinning NMR spectroscopy to define the cell uptake of MRI contrast agents

A new method, based on proton high-resolution magic-angle spinning ((1)H HR-MAS) NMR spectroscopy, has been employed to study the cell uptake of magnetic resonance imaging contrast agents (MRI-CAs). The method was tested on human red blood cells (HRBC) and white blood cells (HWBC) by using three gadolinium complexes, widely used in diagnostics, Gd-BOPTA, Gd-DTPA, and Gd-DOTA, and the analogous complexes obtained by replacing Gd(III) with Dy(III), Nd(III), and Tb(III) (i.e., complexes isostructural to the ones of gadolinium but acting as shift agents). The method is based on the evaluation of the magnetic effects, line broadening, or induced lanthanide shift (LIS) caused by these complexes on NMR signals of intra- and extracellular water. Since magnetic effects are directly linked to permeability, this method is direct. In all the tests, these magnetic effects were detected for the extracellular water signal only, providing a direct proof that these complexes are not able to cross the cell membrane. Line broadening effects (i.e., the use of gadolinium complexes) only allow qualitative evaluations. On the contrary, LIS effects can be measured with high precision and they can be related to the concentration of the paramagnetic species in the cellular compartments. This is possible because the HR-MAS technique provides the complete elimination of bulk magnetic susceptibility (BMS) shift and the differentiation of extra- and intracellular water signals. Thus with this method, the rapid quantification of the MRI-CA amount inside and outside the cells is actually feasible.     

Photobinding of carprofen to protein

Carprofen is a non-steroidal antiinflammatory drug with marked photosensitising properties. In order to elucidate the mechanisms underlying the phenomenon of drug-protein photobinding, mixtures of the drug and human serum albumin were irradiated under different experimental conditions. After irradiation and subsequent gel-filtration chromatography of the photomixture, the eluting protein fraction was analysed by means of fluorescence spectroscopy. The formation of drug-protein photoadducts could be evidenced by the characteristic emission properties of the carbazole chromophore. The photobinding of the drug to human serum albumin appears to involve the formation of aryl radicals resulting from carbon-halogen photocleavage. This mechanistic interpretation is supported by the observed variations in the intensity of the fluorescence spectra, which can be correlated with the lower quantum yield emission of chlorocarbazoles as compared to non-halogenated analogues. The results from laser flash photolysis studies are also in agreement with this proposal.     

Electronic structure of a cobalt monolayer on Cu(100)

Angular resolved photoemission spectra using synchrotron radiation have been measured for different amounts of cobalt evaporated on Cu(100). At room temperature cobalt grows layer-bylayer forming well-ordered layers in registry with the substrate, as judged by AES, LEED and UPS measurements. The energy position and linewidth of the Cu peaks remain unchanged when cobalt is deposited onto the surface, suggesting a rather weak interaction between the d-bands of Co and Cu. The two-dimensional band structure of the monolayer of cobalt has been determined. We have obtained a value for the magnetic exchange splitting of ΔE_exch = 0.80 ± 0.15 eV, which is nearly identical to the bulk value. A shift in the energy positions of the critical points for the monolayer versus bulk of cobalt is interpreted in terms of a narrower 2D density of states in the monolayer as compared to the bulk. A resonant valence-band two-electron satellite has been found. The correlation energy and screening effects of the two d-holes are very similar to the corresponding bulk values, while the decreased intensity of the satellite at resonance compared to the one for Co(0001) suggests that there are more d-states relative to s-states in the monolayer than in a bulk cobalt single crystal, in agreement with recent models of the valence band electronic structure at surfaces.     

Stimulated spin-flip emission from magnetic semiconductors

We show that by inverting the spin state population in a s-d model one might get a temperature tunable stimulated spin-flip emission line in ferromagnetic semiconductors.     

Investigations of sol–gel-derived highly (100)-oriented Ba0.5Sr0.5TiO3 : MgO composite thin films for phase-shifter applications

Sol–gel deposition of highly oriented Ba_0.5Sr_0.5TiO₃:MgO composite thin films has shown desirable dielectric constant reduction and higher figure of merit for phase-shifter applications. In this multilayer configuration, MgO distributed homogeneously through the Ba_0.5Sr_0.5TiO₃ (BST50) matrix, and it helped in tailoring the dielectric constant and reducing the loss tangent significantly. In the present study, the high-frequency dielectric behavior of the films has been evaluated by fabricating an eight-element coupled microstrip phase shifter and measuring the degree of phase shift and insertion loss as a function of applied voltage at room temperature. An increase in phase-shifter figure of merit (degree of phase shift per dB insertion loss) from 28°/dB for pure BST50 to 71°/dB for a BST50:MgO film (at 14 GHz and 333 kV/cm) has been observed. PACS 77.55.+f; 81.20.Fw; 73.40.-c; 85.50.-n     

Origin of the asymmetric magnetization reversal behavior in exchange-biased systems: competing anisotropies

The magnetization reversal in exchange-biased ferromagnetic-antiferromagnetic (FM-AFM) bilayers is investigated. Different reversal pathways on each branch of the hysteresis loop, i.e., asymmetry, are obtained both experimentally and theoretically when the magnetic field is applied at certain angles from the anisotropy direction. The range of angles and the magnitude of this asymmetry are determined by the ratio between the FM anisotropy and the interfacial FM-AFM exchange anisotropy. The occurrence of asymmetry is linked with the appearance of irreversibility, i.e., finite coercivity, as well as with the maximum of exchange bias, increasing for larger anisotropy ratios. Our results indicate that asymmetric hysteresis loops are intrinsic to exchange-biased systems and the competition between anisotropies determines the asymmetric behavior of the magnetization reversal.     

Self-assembled monolayers and chemical derivatization of Ba0.5Sr0.5TiO3 thin films: Applications in phase shifter devices

Thin films of barium strontium titanate (Ba_1−xSr_x TiO₃ (BSTO)) have been used in coupled microstrip phase shifters (CMPS) for possible insertion in satellite and wireless communication platforms primarily because of their high dielectric constant, low loss, large tunability, and good structural stability. In an attempt to improve the figure of merit K (phase shift °/dB of loss) of phase shifters, modification of the metal/BSTO interface of these devices has been done through surface modification of the BSTO layer using a self-assembled monolayer approach. The impact of this nanotechnology promises to reduce RF losses by improving the quality of the metal/BSTO interface. In this study, compounds such as 3-mercaptopropyltrimethoxysilane (MPS), 16-mercaptohexadecanois acid (MHDA) and 3-mercaptopropionic acid (MPA) were used to form the self-assembled monolayers on the BSTO surface. As a result of the previous modification, chemical derivatization of the self-assembled monolayers was done in order to increase the chain length. Chemical derivatization was done using 3-aminopropyltrimethoxysilane (APS) and 16-mercaptohexadecanoic acid. Surface chemical analysis was done to reveal the composition of the derivatization via X-ray photoelectron spectroscopy (XPS) and Fourier Transform Infrared (FT-IR). Low and high frequencies measurements of phase shifters were done in order measure the performance of these devices for insertion in antennas. X-ray photoelectron spectroscopy characterization of modified BSTO thin films with MPS showed a binding energy peak at 162.9 eV, indicative of a possible SO interaction: sulfur of the mercapto compound, MPS, used to modify the surface with the oxygen site of the BSTO thin film. This interaction is at higher binding energies compared with the thiolate interaction. This behavior is observed with the other mercapto compounds such as: MHDA and MPA. An FT-IR analysis present a band at 780 cm⁻¹, which is characteristic of an OSC stretching and reveals the modification of the BSTO thin film by the coupling of the O of the BSTO with the S of the mercapto compound. All the modification using mercapto compounds is through sulfur to the BSTO thin film. MHDA SAM on BSTO thin film was chemically derivatized using APS shown by XPS and FT-IR. The SAMs modified phase shifters showed an improvement in performance with respect to those phase shifters fabricated with standard methods.