Lead ion selective PVC membrane electrode based on 5,5'-dithiobis-(2-nitrobenzoic acid)

A PVC membrane electrode for lead ions based on 5,5′-dithiobis-(2-nitrobenzoic acid) as membrane carrier was prepared. The electrode exhibits a Nernstian response for Pb²⁺ over a wide concentration range (1.0×10⁻²–4.0×10⁻⁶ M). It has a relatively fast response time and can be used for at least 3 months without any divergence in potentials. The proposed electrode revealed good selectivities for Pb²⁺ over a wide variety of other metal ions and could be used in a pH range of 2.0–7.0. It was used as an indicator electrode in potentiometric titration of lead ions and in direct determination of lead in water samples.     

A novel one-pot synthesis of some new interesting pyrrole derivatives

[reaction: see text] 11-(1H-Pyrrol-1-yl)-11H-indeno[1,2-b]quinoxaline and 3-(1H-pyrrol-1-yl)indolin-2-one derivatives have been synthesized in good yields in a novel, one-pot, and efficient process by condensation of 11H-indeno[1,2-b]quinoxalin-11-one or isatin derivatives with 4-hydroxyproline on solid-support montmorillonite K10 under microwave irradiation.     

Silver nanoparticle decorated poly(2-aminodiphenylamine) modified carbon paste electrode as a simple and efficient electrocatalyst for oxidation of formaldehyde

This work describes the promising activity of silver nanoparticles on the surface of a poly(2-amino diphenylamine) modified carbon paste electrode (CPE) towards formaldehyde oxidation. Electrodeposition of the conducting polymer film on the CPE was carried out using consecutive cyclic voltammetry in an aqueous solution of 2-aminodiphenylamine and HCl. Nitrogen groups in the polymer backbone had a Ag ion accumulating effect, allowing Ag nanoparticles to be electrochemically deposited on the surface of the electrode. The electrochemical and morphological characteristics of the modified electrode were investigated. The electro-oxidation of formaldehyde on the surface of electrode was studied using cyclic voltammetry and chronoamperometry in aqueous solution of 0.1 mol/L NaOH. The electro-oxidation onset potential was found to be around -0.4 V, which is unique in the literature. The effect of different concentrations of formaldehyde on the electrocatalytic activity of the modified electrode was investigated. Finally, the diffusion coefficient of formaldehyde in alkaline media was calculated to be 0.47 × 10^-6 cm²/s using chronoamperometry.     

Effect of block lengths on the association behavior of poly(l-lactic acid)/poly(ethylene glycol) (PLA–PEG–PLA) micelles in aqueous solution

A series of poly(l-lactic acid)/poly(ethylene glycol) triblock copolymers with a PLA–PEG–PLA architecture were synthesized by a ring-opening polymerization (ROP) process. The copolymers were characterized by ¹H NMR and GPC. The total number average molecular weights were in the range of 4,700–50,000, whereas the degrees of polymerization of the PLA and PEG blocks varied from 15 to 359 and from 68 to 136, respectively. The self-association of these copolymers in aqueous environment was studied by emission fluorescence spectroscopy of anilinonaphthalene probe and the critical association concentration (CAC) of the copolymers was measured. It was found that the micellization process of these copolymers was mainly determined by the length of the hydrophobic LA block, while the length of the hydrophilic PEG block had little effect. Furthermore, the low CAC values of the copolymers suggest that the copolymers form stable supramolecular structures in aqueous solutions.     

PVT properties of imidazolium-, phosphonium-, pyridinium- and pyrrolidinium-based ionic liquids using critical point constants

Song and Mason equation of state (EOS) with a simple modification has been extended to modelling PVT properties of ionic liquids (ILs). The considered ILs are [C₁mim][MeSO4], [C₁mim][CH₃OC₂H₅SO₄], [C₁mim][(CH₃)₂PO₄], [C₂mim][MeSO4], [C₂mim][BF₄], [C₂mim][SCN], [C₂eim][NTf₂], [C₄mim][C(CN)₃], [C₄mim][CF₃SO₃], [C₄mim][SCN], [C₅mim][NTf₂], [C₈mim][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Cl], [(C₆H₁₃)₃P(C₁₄H₂₉)][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Ac], [C₃mpyr][NTf₂], [C₄mpyr][NTf₂] and [Py][C₂H₅OC₂H₄SO₄]. Three temperature-dependent parameters in the proposed EOS have been scaled as functions of reduced temperature with the use of the law of corresponding states. It is shown that the knowledge of just critical temperature and critical density is sufficient to predict the PVT properties of these ILs. The overall average absolute deviation of calculated densities from literature values for 1347 data points of 18 ILs was found to be 0.58%. The predicted density of ILs from proposed EOS has been compared with those obtained by other literature work. Moreover, we indicate that the Zeno line regularity can well be predicted by proposed model for ILs.     

A selective colorimetric and fluorescence chemosensing sensor for Cr<Superscript>3+</Superscript> based on a rhodamine base derivative

A rhodamine-conjugated coumarin (L) was used in designing a selective fluorescence chemosensor for the determination of trace amounts of Cr³⁺ ions in acetonitrile–water (MeCN/H₂O (90:10, %v/v) solutions. The intensity of the fluoresce emission of the chemosensor is intensified upon addition of Cr³⁺ ions in MeCN/H₂O (90:10, %v/v) solutions, due to the formation of a selective 1:1 complex between L and Cr³⁺ ions. The fluorescence enhancement versus Cr³⁺ concentration has been found to be linear from 1.0?×?10^?7 to 1.8?×?10^?5 M and a detection limit of 7.5?×?10^?8 M. The proposed fluorescent probe proved to be highly selective towards Cr³⁺ ions as compared to other common metal ions and could be successfully applied to the determination of Cr³⁺ concentrations in some water and wastewater samples.     

Sol–gel coating of poly(ethylene glycol)‐grafted multiwalled carbon nanotubes for stir bar sorptive extraction and its application to the analysis of polycyclic aromatic hydrocarbons in water

Poly(ethylene glycol) grafted onto carboxyl‐terminated multi‐walled carbon nanotubes were prepared by the sol–gel technique as a stationary phase for stir bars. The analytical methodology included stir bar sorptive extraction with micellar desorption followed by liquid chromatography. Polycyclic aromatic hydrocarbons were used as the model compounds to evaluate the extraction performance. The extraction efficiency, for the determination of polycyclic aromatic hydrocarbons from water samples, was optimized based on a chemometrics approach. The effect of the experimental parameters on the extraction response was investigated and the optimum extraction conditions were selected. Under the optimum conditions, the proposed method showed a good linearity within the different ranges for different analytes (e.g. 0.05–500 ng/mL for phenanthrene), a square of the correlation coefficient was higher than 0.999, and an appropriate limit of detection in the range of 0.013–0.072 ng/mL. The recoveries in all cases were above 94%, with relative standard deviations below 2.4%.     

A new PVC matrix membrane sensor for determination of praseodymium(III) ion based on bis(salicylaldehyde)thiocarbohydrazone as an ion carrier

The sufficient amounts of bis(salicylaldehyde) thiocarbohydrazone (STCH) as a lipophilic selective element (3%, w/w), sodium nitrobenzene (NB) as a plasticizer (64%, w/w), tetraphenyl borate (NaTPB) as an anionic additive (3%, w/w), and poly vinyl chloride (PVC) as a polymeric matrix (30%, w/w) was employed to form a PVC membrane of a new Pr³⁺ ions selective sensor to apply as an indicator electrode in analytical applications. The best electrode response was observed in the slope (19.5 ± 0.7 mV per decade) over a wide concentrations from lower (1.0 × 10^?6 mol L^–1) to higher (1.0 × 10^?2 mol L^–1) of Pr³⁺ ion solution with a detection limit of 8.5 × 10^–7 mol L^–1. This electrode showed the fast response time about 10 second for praseodymium ion concentration range of 1.0 × 10^–6 to 1.0 × 10^–2 mol L^–1, in the pH range of 2.3–7.9. The matched potential method was applied to study the selectivity of electrode toward Pr³⁺ ions in comparison with many common cations. The results showed the negligible disturbance of all other cations on the proposed praseodymium(III) electrode. The making sensor has been employed successfully as an indicator electrode in the potentiometric titration of praseodymium(III) solution with EDTA at pH 6.0. Moreover the applicability of the sensor was studied in determination of Pr³⁺ ion in mixtures of different ions.     

Application of the localized surface plasmon resonance of gold nanoparticles for the determination of 1,1-dimethylhydrazine in water: Toward green analytical chemistry

Localized surface plasmon resonance (LSPR) is an optical phenomena generated by light when it interacts with conductive nanoparticles that are smaller than the incident wavelength. In this work, we proposed a simple, fast, and green method for spectrophotometric determination of unsymmetrical 1,1-dimethylhydrazine (UDMH) based on LSPR property of gold nanoparticles (AuNPs). An LSPR band is produced via reduction of Au³⁺ ions in solution by UDMH as active reducing agent in the presence of cetyltrimethylammonium chloride as a capping agent. Some important parameters in the formation of LSPR including Au(III) concentration, pH, concentration of stabilizer, and reaction time were studied and optimized. Under optimum conditions, the LSPR intensity displays linear response with the increasing UDMH concentration in the range from 0.5–10 μg/mL at 550 nm with a detection limit of 0.2 μg/mL. Also, the relative standard deviation for ten replicate determination of 5.0 μg/mL of UDMH was 3%. Usage of AuNPs as new nontoxic reagent instead of hazardous reagents in the spectrophotometric determination of UDMH is a step toward green analytical chemistry. The proposed method was successfully applied for determination of UDMH in water and wastewater samples.     

Fluorescence based turn-on strategy for determination of microRNA-155 using DNA-templated copper nanoclusters

The authors report on a new approach for the determination of the breast cancer biomarker microRNA-155 (miRNA-155). It is based on the measurement of the fluorescence shift of oligonucleotide-templated copper nanoclusters (DNA-CuNC). A probe DNA was designed that acts as a template for the preparation of CuNC which, under 400 nm excitation, exhibit strong fluorescence enhancement at 490 nm and a 90 nm Stokes shift after binding to target miRNA-155 and formation of a DNA-RNA heteroduplex. Under the optimal conditions, the fluorescence of the DNA-CuNC increases with increasing concentration of miRNA-155 in the range from 50 pM to 10 nM, with a 11 pM detection limit. The assay has excellent selectivity over noncomplementary RNA. The method was applied to the determination of miRNA-155 in the presence of human plasma and saliva.

Open image in new window

Graphical abstract Schematic of the detection strategy that relies on the fluorescence shift of DNA-CuNCs resulting from the specific binding of DNA-CuNCs with target miRNA-155. Fluorescence intensities are linearly proportional to the concentrations of target RNA from 50 pM to 10 nM.