Synthesis and structures of cis- and trans-bis(alkyneselenolato)platinum(II) complexes

The reaction of 2 equiv of LiSeCC-n-C(5)H(11) (1) with cis-PtCl(2)(Ph(3)P)(2) (2) gives a mixture of the cis and trans isomers of Pt(Ph(3)P)(2)(SeCC-n-C(5)H(11))(2) (3), which slowly isomerizes in CH(2)Cl(2) to the preferred trans form trans-3. The closely related cis-[Pt(dppf)(2)(SeCC-n-C(5)H(11))(2)] (4) (dppf = bis(diphenylphosphino)ferrocene) was prepared by a similar metathetical reaction using the platinum chloride complex of the chelating dppf to impose the cis geometry. The structures of the cis and trans complexes have been investigated in solution by heteronuclear NMR ((31)P, (77)Se, and (195)Pt) and, in the cases of trans-3 and 4, characterized in the solid state by single-crystal X-ray diffraction. Changing the coordination geometry from cis to trans induces significant changes in the structural and spectroscopic parameters, which do not comply with the previously anticipated donor-acceptor properties of selenolate ligands.     

Regioselective synthesis of 4- and 5-oxazole-phosphine oxides and -phosphonates from 2H-azirines and acyl chlorides

A simple and efficient regioselective synthesis of 4-oxazole-phosphine oxides 11 and -phosphonates 12 from 2H-azirine-phosphine oxides 1 and -phosphonates 6 is described. The key step for the synthesis of oxazoles 11 is a base-mediated ring closure of vinylogous α-aminophosphorus compounds derived from phosphine oxides 4 and from phosphonates 8. These derivatives 4 and 8 are obtained by reaction of functionalized azirines 1 and 6 with acyl chlorides 2 and subsequent acid-catalyzed ring opening of N-acylaziridine-phosphine oxides 3 and -phosphonates 7. Regioselective thermal ring cleavage of N-acylaziridine-phosphine oxides 3 leads α-chloro-β-(N-acylamido)-phosphine oxides 13 and their treatment with bases gives 5-oxazole-phosphine oxides 16.     

Synthesis and characterization of three novel perfluoro-oligothiophenes ranging in length from the trimer to the pentamer

In this Article, we report on the synthesis and full characterization of three perfluorinated oligothiophenes, ranging in length from the trimer to the pentamer (PF-nT, with n = 3, 4, or 5). The differential pulse voltammetry (DPV) analysis of the compounds showed that they can be both oxidized and reduced (i.e., they display a dual or amphoteric electrochemical behavior), with the reduction peaks positively shifted relative to those of the corresponding unsubstituted oligothiophenes. The electrochemically determined energy gaps are in agreement with those measured from the UV-vis-NIR absorption spectra in solution. The conjugational properties have been investigated by means of FT-Raman spectroscopy, both as pure solids and as dilute solutes in CH(2)Cl(2), revealing that: (i) pi-conjugation does not still reach saturation with chain length for the longest oligomer, and (ii) conformational distortions from a nearly coplanar arrangement of the successive thiophene units upon solution are not too large. DFT and TDDFT quantum chemical calculations have been performed, at the B3LYP/6-31G level, to assess information about the optimized molecular structure, equilibrium atomic charges distribution, energies and topologies of the frontier molecular orbitals (MO) around the gap, vibrational normal modes associated with the most outstanding Raman scatterings, and vertical one-electron excitations that give rise to the main optical absorptions.     

Asymmetric synthesis of 2H-azirines derived from phosphine oxides using solid-supported amines. Ring opening of azirines with carboxylic acids

A simple and efficient asymmetric synthesis of 2H-azirine-2-phosphine oxides 3 is described. The key step is a solid-phase bound achiral or chiral amine-mediated Neber reaction of beta-ketoxime tosylates derived from phosphine oxides 1. Reaction of 2H-azirines 3 and 11 with carboxylic acids 4 gives phosphorylated ketamides 5 and 12. Ring closure of ketamides 5 and 12 with triphenylphosphine and hexachloroethane in the presence of triethylamine leads to the formation of phosphorylated oxazoles 8 and 13.     

Electric field induced electron transfer at the adsorbate-surface interface. Effect of the type of metal surface

The ab initio two-state model for electron transfer induced by an external electric field has been applied to the chloride oxidation on Cu, Rh, Pd, Ag, Pt and Au (001) surface models. The two electronic states involved in the model represent physical situations where the electron transferred from the chloride anion to the metal surface lies either on the halide or on the metal substrate. The model assumes that electron transfer takes place when these two states become degenerate and this is achieved by applying an external electric field. Two different situations representing either ultrahigh vacuum or electrochemical conditions have been considered. For the former the present study shows that electric field necessary to achieve degeneracy of the two electronic states is directly related to the metal surface work function whereas for the latter, it is found to be rather insensitive to the metal surface.     

New fluorescent probes for testing combinatorial catalysts with phosphodiesterase and esterase activities

Combinatorial development of new catalysts with phosphodiesterase and esterase activities requires specific fluorescent probes for rapid visual detection of hydrolytic activity. Such fluorescent probes have been synthesized with special attention to solubility in water and stability towards spontaneous hydrolysis at a given pH. The probes reported here include compound 5 based on a fluorescein fluorophore, compound 12 for FRET-detection of phosphodiester hydrolysis and compound 25 based on a quinolinium fluorophore.     

Indium(III) chloride catalyzed one step synthesis of some new dibenzo(d,f)(1,3)dioxepines and 12H-dibenzo(d,g)(1,3)dioxocin derivatives

In the presence of catalytic amount of indium(III) chloride (10 mol %), 2,2′-dihydroxybiphenyl and bis(2-hydroxyphenyl)methane react quickly, without using any solvent, with ketones or β-keto esters possessing at least one hydrogen atom in α to the ketone-carbonyl group, to afford some new dibenzo(d,f)(1,3)dioxepines and some 12H-dibenzo(d,g)(1,3)dioxocin derivatives, respectively.     

Photochemically induced fluorescence investigation of aβ-cyclodextrin: Azure A inclusion complex and determination of analytical parameters

The photooxidation of Azure A and fluorescence properties of Azure A and its photoproduct have been investigated in aqueous media and in the presence of-cyclodextrin (-CD). The fluorescence intensity of the complex formed between the photoproduct and -CD was found to be three times higher than that of the uncomplexed Azure A photoproduct. A complex formation constant of 110±40 M^–1 was calculated using the Benesi-Hildebrand treatment of the fluorescence emission data. Although the stoichiometry of the Azure A photoproduct: -CD complex was found to be 1: 1, it seems that the Azure A structure is only partially included. Calibration graphs were plotted for the free Azure A photoproduct and the photogenerated product included in -CD. The analytical parameters and quantification limits were determined.     

Comparison of capillary electrophoresis with traditional methods to analyse bovine whey proteins

The separation of the four major whey proteins by sodium dodecyl sulphate (SDS)-capillary gel electrophoresis (CGE) is described. Whilst commercially purified whey proteins could be analysed using the recommended protocol, the more complex nature of an acid whey and a reconstituted whey protein concentrate (WPC) powder necessitated considerable refinement of the CGE sample buffer. Individual whey proteins in the acid whey and WPC samples were then also separated and quantitated using capillary zone electrophoresis, polyacrylamide gel electrophoresis (PAGE) and HPLC methods and the results were compared. The values obtained for -lactalbumin (-Lac) and β-lactoglobulin (β-Lg) were consistent throughout the various methods, although size-exclusion HPLC, SDS-PAGE and SDS-CGE could not separate the two β-Lg variants or the glycosylated form of -Lac from the β-Lg. There was considerable variation in the values for the bovine serum albumin and immunoglobulin determined by the different methods and it was concluded that none of the methods could satisfactorily quantitate all four whey proteins.     

Stability study and determination of benzene- and naphthalenesulfonates following an on-line solid-phase extraction method using the new programmable field extraction system

Seven benzene- and naphthalenesulfonates (3-nitrobenzenesulfonate, 4-methylbenzenesulfonate, 1-hydroxy-4-naphthalenesulfonate, 1-amino-7-naphthalenesulfonate, 4-chlorobenzenesulfonate, 1-naphthalenesulfonate and 2-naphthalenesulfonate) were studied. A rapid method for quantifying aromatic sulfonated compounds from waste water samples was developed. This method consists in on-line in-field sampling and monitoring based on ion-pair solid-phase extraction with PLRP-S sorbent, using the new programmable field extraction system and ion-pair liquid chromatography with UV diode-array and electrospray mass spectrometry. Limits of detection for the studied compounds, using the SIM acquisition mode, ranged from 0.01 to 0.33 ng ml(-1). The influence of the aqueous matrix on the on-line SPE was checked by spiking ground and waste waters. Recoveries varied from 70 to 99% when 10 ml of water sample were enriched. The method was applied to the analysis of some environmental sewage samples. This study confirmed that high concentration levels of aromatic sulfonated compounds can be found in sewage samples. In addition, the stability of the seven studied sulfonated benzene and naphthalene compounds was investigated using on-line polymeric SPE pre-columns, based on the styrene-divinylbenzene polymer PLRP-S. Different storage conditions were tested to carry out the stability survey, which included storage at room temperature, at 4 degrees C and at -20 degrees C, during a period of up to 2 weeks. This study showed that the stability of aromatic sulfonic acids on disposable on-line SPE polymeric pre-columns is related to temperature and that the target compounds are more stable at lower temperatures.