HPLC and GC Methods for Determination of Lubricants and Their Evaluation in Analysis of Real Samples of Polyethylene

High performance liquid chromatography (HPLC) and gas chromatography (GC) are introduced for analysis of polymer lubricants (stearamide, oleamide and erucamide). In the HPLC method, a reverse phase octadecylsilane (ODS) column along with acetonitrile/methanol (60:40) as a mobile phase were used. Detection of analytes was performed by a UV detector at 202 nm. The analysis time was less than 8 min. In the GC method, polar capillary column and flame ionization detector (FID) were used for separations and detection, respectively. The analysis time by GC was longer than HPLC and was about 30 min. Limits of detection, linear range and repeatability of both methods are similar, but determination of oleamide in real samples by HPLC method is difficult due to complexity of the initial part of HPLC chromatogram in polyethylene samples. That problem is not observed in the GC method. Detection limits in both methods for all analytes are lower than 0.003% which are much lower than the amount of lubricants in commercial polymers (0.05–0.2%).     

Flow-through optical fiber sensor for automatic sulfide determination in waters by multisyringe flow injection analysis using solid-phase reflectometry

A software-controlled flow-through optical fiber diffuse reflectance sensor capitalized on the implementation of disk-based solid-phase pre-concentration schemes in a multisyringe flow injection analysis (MSFIA) set-up is proposed for the trace determination of sulfide in environmental waters and wastewaters. The fully automated flowing methodology is based on Fischer's coupling reaction of sulfide with N,N-dimethyl-p-phenylenediamine (DMPD) in the presence of Fe(iii) as oxidizing reagent in a 0.5 M HCl medium. The on-line generated methylene blue dye is subsequently delivered downstream to a dedicated optode cell furnished with an octadecyl-chemically modified (C(18)) disk, while continuously recording the diffuse reflectance spectrum of the pre-concentrated compound. A double regeneration protocol is finally executed to warrant minimum background noise and negligible baseline. Under the optimized chemical and hydrodynamic conditions, the optosensing MSFIA method features coefficients of variation better than 0.7%(n= 10) at 50 microg l(-1) concentration, a linear working range of 20-200 microg l(-1) sulfide, a 3sigma(blank) detection limit of 2.9 microg l(-1) sulfide and an injection throughput of 8 h(-1) for a pre-concentration sample volume of 2.9 ml. The interfacing of the robust and versatile multisyringe flow injection-based optode with a plug-in spectrophotometer furnished with a light emitting diode assures the miniaturization of the overall flow analyzer, which is, thus, readily adaptable to real-time monitoring schemes. The potential of the multisyringe flow method was assessed via the determination of sulfide traces in water samples of different complexity (namely, freshwater, seawater and wastewater).     

A study of peroxyoxalate-chemiluminescence of acriflavine

The chemiluminescence arising from the reaction of bis(2,4,6-trichlorophenyl)oxalate (TCPO) with hydrogen peroxide in the presence of acriflavine has been studied. The relationship between the chemiluminescence intensity and concentrations of TCPO, H2O2, acriflavine and the base sodium salicylate are reported. The kinetic parameters for the peroxyoxalate-chemiluminescence (PO-CL) of acriflavine were evaluated from the computer fitting of the corresponding chemiluminescence intensity-time plots.     

The addition of pentafluorosulfur bromide to fluoroolefins II

This paper reports the preparation, properties, and structure of new SF₅Br-fluoroolefin adducts. The extent and direction of SF₅Br addition to fluoroolefins have been studied with seven fluoroolefins. Steric factors appear to be important for this addition.     

Anion-receptor molecules: Macrocyclic and macrobicyclic effects on anion binding by polyammonium receptor molecules

The stability constants for anion binding by the acyclic hexaamine 1 , its macrocyclic analogue 2 , and the bicyclic compound 3 in their protonated forms are reported. Compound 3 forms stable and selective complexes with halide ions, the stability sequence being I^? > Br^? > Cl^?. Compound 2 forms more stable complexes with sulfate, oxalate, and malonate dianions than its acyclic analogue 1 and shows a better selectivity pattern. Compound 3 forms stronger complexes with oxalate^2? than 2 and shows a remarkably high binding selectivity between oxalate^2? and malonate^2?. The comparison of the ability of 1–3 to complex anions demonstrates the macrocyclic and macrobicyclic effects on anion binding stability and selectivity.     

Influence of oxidising agents in lead determination by hydride generation direct flame atomic absorption spectroscopy

Summary The influence of Cr₂O₇ ^2–, MnO₄ ^–, Ce⁴⁺, H₂O₂ and S₂O₈ ^2– as oxidising agents in lead determination as volatile covalent hydride using NaBH₄ is reported in this paper.The reaction conditions for every oxidising agents (pH, quantity and concentration of the oxidising agent, quantity and concentration of the NaBH₄ and reaction time) are optimized, determining sensitivity and detection limit by measuring the peak height.The recovery of lead from solution has been measured by flameless atomic absorption spectroscopy.A linear relationship the logarithm of absorbance values and the redox potential of the system is obtained with a correlation coefficient of 0.999. The results and their interpretation are given in this paper.

---

Der Einflu oxidierender Reagentien auf die Bleibestimmung mittels Flammenatomabsorptionsspektrometrie nach Hydridbildung

Zusammenfassung Es wird über den Einfluß der Oxidantien Cr₂O₇, MnO₄ ^–, Ce⁴⁺, H₂O₂ und S₂O₈ ^{2 –} auf die Bleibestimmung als kovalentes Hydrid berichtet. Für jede oxidierende Substanz werden die Reaktionsbedingungen optimiert (pH, Menge und Konzentration des Oxidans, Menge und Konzentration von NaBH₄ und Reaktionszeit), um Empfindlichkeit und Nachweisgrenze durch Peakhöhenauswertung zu bestimmen.Die Wiederfindungsrate wurde durch elektrothermale Atomabsorptionsspektrometrie von Blei in der Lösung bestimmt.Der Zusammenhang zwischen dem Logarithmus der Extinktion und dem Redoxpotential des Oxidans ergibt eine lineare Beziehung mit einem Korrelationskoeffizienten von 0.999. Die Ergebnisse und deren Interpretation werden in dieser Arbeit beschrieben.

---

---

Paper presented to Euroanalysis V. Cracow, August 1984.     

The surface catalytic mechanism: a comparative study with square-wave and staircase cyclic voltammetry

A pseudo-first-order catalytic mechanism in which both reactant and product of a redox reaction are strongly immobilized on an electrode surface is theoretically analysed under conditions of square-wave (SWV) and staircase cyclic voltammetry (SCV). A mathematical procedure is developed under diffusionless conditions. The relationships between the properties of the voltammetric response and both the kinetic parameters of the redox reaction and the parameters of the excitation signal are studied. The phenomenon of the quasi-reversible maximum is discussed. A comparative study between SWV and SCV is presented and the limitations and advantages of both techniques, from analytical and kinetic points of view, are discussed. The theoretical predictions are experimentally confirmed by the redox reaction of azobenzene in the presence of hydrogen peroxide as an oxidizing agent. Electronic Publication     

An electropolymerized aniline-based fiber coating for solid phase microextraction of phenols from water

An aniline-based polymer was electrochemically prepared and applied as a new fiber coating for solid phase microextraction (SPME) of some priority phenols from water samples. The polyaniline (PANI) film was directly electrodeposited on the platinum wire surface in sulfuric acid solution using cyclic voltammetry (CV) technique. The efficiency of new coating was investigated using a laboratory-made SPME device and gas chromatography with flame ionization detection for the extraction of some phenols from the headspace of aqueous samples. The scanning electron microscopy (SEM) images showed the homogeneity and the porous surface structure of the film. The results obtained proved the ability of this polymer as a suitable SPME fiber coating for trapping the selected phenols. Influential parameters affecting the extraction process were optimized and an extraction time of 50 min at 50 °C gave maximum efficiency, when the aqueous sample was saturated with NaCl and adjusted at pH 2. This new coating can be prepared easily in a reproducible manner and it is rather inexpensive and stable against most of organic solvents. The PANI thickness can be precisely controlled by the number of CV cycles. At the optimum conditions, the R.S.D. for a double distilled water spiked with phenol and chlorophenols at ppb level were 4.8-17% (n = 3) and detection limits for the studied compounds were between 0.69 and 3.7 ng ml⁻¹, except for phenol and 4-chlorophenol. The optimized method was successfully applied to some real-life water samples.     

Molecular Genomic Study of Inhibin Molecule Production through Granulosa Cell Gene Expression in Inhibin-Deficient Mice

Inhibin is a molecule that belongs to peptide hormones and is excreted through pituitary gonadotropins stimulation action on the granulosa cells of the ovaries. However, the differential regulation of inhibin and follicle-stimulating hormone (FSH) on granulosa cell tumor growth in mice inhibin-deficient females is not yet well understood. The objective of this study was to evaluate the role of inhibin and FSH on the granulosa cells of ovarian follicles at the premature antral stage. This study stimulated immature wild-type (WT) and Inhibin-α knockout (Inha−/−) female mice with human chorionic gonadotropin (hCG) and examined hCG-induced gene expression changes in granulosa cells. Also, screening of differentially expressed genes (DEGs) was performed in the two groups under study. In addition, related modules to external traits and key gene drivers were determined through Weighted Gene Co-Expression Network Analysis (WGCNA) algorithm. The results identified a number of 1074 and 931 DEGs and 343 overlapping DEGs (ODEGs) were shared in the two groups. Some 341 ODEGs had high relevance and consistent expression direction, with a significant correlation coefficient (r² = 0.9145). Additionally, the gene co-expression network of selected 153 genes showed 122 nodes enriched to 21 GO biological processes (BP) and reproduction and 3 genes related to genomic pathways. By using principal component analysis (PCA), the 14 genes in the regulatory network were fixed and the cumulative proportion of fitted top three principal components was 94.64%. In conclusion, this study revealed the novelty of using ODEGs for investigating the inhibin and FSH hormone pathways that might open the way toward gene therapy for granulosa cell tumors. Also, these genes could be used as biomarkers for tracking the changes in inhibin and FSH hormone from the changes in the nutrition pattern.     

Functionalized Ultrasmall Iron Oxide Nanoparticles for T1-Weighted Magnetic Resonance Imaging of Tumor Hypoxia

Hypoxia is a common biological condition in many malignant solid tumors that plays an imperative role in regulating tumor growth and impacting the treatment’s therapeutic effect. Therefore, the hypoxia assessment is of great significance in predicting tumor development and evaluating its prognosis. Among the plenty of existing tumor diagnosis techniques, magnetic resonance imaging (MRI) offers certain distinctive features, such as being free of ionizing radiation and providing images with a high spatial resolution. In this study, we develop a fluorescent traceable and hypoxia-sensitive T₁-weighted MRI probe (Fe₃O₄-Met-Cy5.5) via conjugating notable hypoxia-sensitive metronidazole moiety and Cy5.5 dye with ultrasmall iron oxide (Fe₃O₄) nanoparticles. The results of in vitro and in vivo experiments show that Fe₃O₄-Met-Cy5.5 has excellent performance in relaxivity, biocompatibility, and hypoxia specificity. More importantly, the obvious signal enhancement in hypoxic areas indicates that the probe has great feasibility for sensing tumor hypoxia via T₁-weighted MRI. These promising results may unlock the potential of Fe₃O₄ nanoparticles as T₁-weighted contrast agents for the development of clinical hypoxia probes.