Determination of migrated phthalic acid residues into edible oils using a green mode of air-assisted liquid–liquid microextraction followed by high-performance liquid chromatography–diode array detector

In this study, for the first time, an organic solvent-free air-assisted liquid–liquid microextraction method has been reported for the extraction and preconcentration of phthalic acids (o-phthalic acid, m-phthalic acid, and p-phthalic acid) from edible oil samples. The method is based on the repeated aspirating/injection of an alkaline aqueous solution and the oil sample mixture in a conical bottom centrifuge tube to form a cloudy solution. After phase separation by centrifuging, the sedimented phase is directly analyzed by high-performance liquid chromatography–diode array detection. Under the optimum extraction conditions, the method showed low limits of detection and quantification between 0.11–0.29 and 0.28–0.91 ng mL^?1, respectively. Extraction recoveries and enrichment factors were from 81 to 97% and 406 to 489, respectively. The relative standard deviations for the analysis of 5 ng mL^?1 of each analyte were less than 5.9% for intraday (n = 6) and interday (n = 5) precisions. Finally, different oil samples were successfully analyzed using the proposed method and m-phthalic acid, and p-phthalic acid were determined in some of them at ng mL^?1 level.     

Flow injection-based cloud point extraction of phosalone and ethion in seawater of Chabahar Bay and determination by high-performance liquid chromatography: study of use of carbon nanotube and nanofibers as a column filler in flow system

This study presents an easy and cost-effective flow-based cloud point extraction (CPE) method for determining partial amounts of two organophosphorus pesticides (phosalone and ethion) in seawater by HPLC–UV–Vis. In continues CPE methodology, the effect of the different column packing type such as carbon nanotube, polyacrylonitrile nanofiber and fiberglass on pesticide extraction was investigated. The Triton X-100 was utilized as nonionic surfactant, and moreover, effect of different parameters such as pH, temperature, extraction time, surfactant concentration, type and volume of the eluent solution on the extraction efficiency was optimized. Under optimum conditions, the figures of merit of the method for phosalone and ethion were obtained as: the enrichment factor (172 and 166), line range (0.8–300 and 0.5–300 µg L^?1, R ² = 0.9973 and 0.9982), relative standard deviation in concentration of 200 µg L^?1 (%RSD = %5.4 and %7.99, N = 5) and limit of detection (LOD = 0.24 and 0.14 µg L^?1). The suggested method was successfully used for determination of phosalone and ethion in Chabahar Bay seawaters with satisfactory results.     

Convective heat transfer in the thermal entrance region of finned double-pipe

Numerical simulation of the steady and laminar convection in the thermal entry region of the finned annulus is carried out for the case of hydrodynamically fully developed flow when subjected to uniform heat flux thermal boundary condition. Finite difference based marching procedure is used to compute the numerical solution of the energy equation. The results to be presented include Nusselt number, as a function of dimensionless axial length and thermal entrance length for various configurations of the finned double-pipe. The numerical results show that Nusselt number has complex dependence on the geometric variables like ratio of radii, fin height, and number of fins. A comparison of the computed results for certain limiting cases with the results available in the literature validates the numerical procedure used in this work.     

Photocatalysed degradation of a herbicide derivative, Dinoterb, in aqueous suspension

The photocatalytic degradation of a herbicide derivative, Dinoterb (1), has been investigated in aqueous micellar solution in the presence of titanium dioxide (TiO₂) and air as a function of irradiation time under a variety of conditions using UV and HPLC analysis techniques. The degradation kinetics was studied under different conditions such as different types of TiO₂, catalyst concentration, substrate concentration and reaction pH in the presence of air. The photocatalyst Degussa P25 was found to be more efficient catalyst as compared to other photocatalysts tested. The model compound was found to degrade more efficiently under neutral pH as compared to acidic and alkaline pH. GC/MS analysis of the irradiated samples indicate the formation of 2-isopropyl-4,6-dinitro-phenol as by-product which has been characterized on the basis of molecular ion and mass fragmentation pattern. A probable pathway for its formation has been proposed.     

Development of a new microextraction method based on a dynamic single drop in a narrow-bore tube: application in extraction and preconcentration of some organic pollutants in well water and grape juice samples

A novel sample preparation technique, the microextraction method based on a dynamic single drop in a narrow-bore tube, coupled with gas chromatography-flame ionization detection (GC-FID) is presented in this paper. The most important features of this method are simplicity and high enrichment factors. In this method, a microdrop of an extraction solvent assisted by an air bubble was repeatedly passed through a narrow-bore closed end tube containing aqueous sample. It has been successfully used for the analysis of some pesticides as model analytes in aqueous samples. Parameters affecting the method's performance such as selection of extraction solvent type and volume, number of extractions, volume of aqueous sample (tube length), and salt effect were studied and optimized. Under the optimal conditions, the enrichment factors (EFs) for triazole pesticides were in the range of 141-214 and the limits of detection (LODs) were between 2 and 112 μg L⁻¹. The relative standard deviations (C = 1000 μg L⁻¹, n = 6) were obtained in the range of 2.9-4.5%. The recoveries obtained for the spiked well water and grape juice samples were between 71 and 106%. Low cost, relatively short sample preparation time and less solvent consumption are other advantages of the proposed method.     

Automated flow-based anion-exchange method for high-throughput isolation and real-time monitoring of RuBisCO in plant extracts

In this work, a miniaturized, completely enclosed multisyringe-flow system is proposed for high-throughput purification of RuBisCO from Triticum aestivum extracts. The automated method capitalizes on the uptake of the target protein at 4 °C onto Q-Sepharose Fast Flow strong anion-exchanger packed in a cylindrical microcolumn (105 × 4 mm) followed by a stepwise ionic-strength gradient elution (0-0.8 mol/L NaCl) to eliminate concomitant extract components and retrieve highly purified RuBisCO. The manifold is furnished downstream with a flow-through diode-array UV/vis spectrophotometer for real-time monitoring of the column effluent at the protein-specific wavelength of 280 nm to detect the elution of RuBisCO. Quantitation of RuBisCO and total soluble proteins in the eluate fractions were undertaken using polyacrylamide gel electrophoresis (PAGE) and the spectrophotometric Bradford assay, respectively. A comprehensive investigation of the effect of distinct concentration gradients on the isolation of RuBisCO and experimental conditions (namely, type of resin, column dimensions and mobile-phase flow rate) upon column capacity and analyte breakthrough was effected. The assembled set-up was aimed to critically ascertain the efficiency of preliminary batchwise pre-treatments of crude plant extracts (viz., polyethylenglycol (PEG) precipitation, ammonium sulphate precipitation and sucrose gradient centrifugation) in terms of RuBisCO purification and absolute recovery prior to automated anion-exchange column separation. Under the optimum physical and chemical conditions, the flow-through column system is able to admit crude plant extracts and gives rise to RuBisCO purification yields better than 75%, which might be increased up to 96 ± 9% with a prior PEG fractionation followed by sucrose gradient step.     

Rapid isolation of plutonium in environmental solid samples using sequential injection anion exchange chromatography followed by detection with inductively coupled plasma mass spectrometry

This paper reports an automated analytical method for rapid determination of plutonium isotopes (²³⁹Pu and ²⁴⁰Pu) in environmental solid extracts. Anion exchange chromatographic columns were incorporated in a sequential injection (SI) system to undertake the automated separation of plutonium from matrix and interfering elements. The analytical results most distinctly demonstrated that the crosslinkage of the anion exchanger is a key parameter controlling the separation efficiency. AG 1-×4 type resin was selected as the most suitable sorbent material for analyte separation. Investigation of column size effect upon the separation efficiency revealed that small-sized (2 mL) columns sufficed to handle up to 50 g of environmental soil samples. Under the optimum conditions, chemical yields of plutonium exceeded 90% and the decontamination factors for uranium, thorium and lead ranged from 10³ to 10⁴. The determination of plutonium isotopes in three standard/certified reference materials (IAEA-375 soil, IAEA-135 sediment and NIST-4359 seaweed) and two reference samples (Irish Sea sediment and Danish soil) revealed a good agreement with reference/certified values. The SI column-separation method is straightforward and less labor intensive as compared with batch-wise anion exchange chromatographic procedures. Besides, the automated method features low consumption of ion-exchanger and reagents for column washing and elution, with the consequent decrease in the generation of acidic waste, thus bearing green chemical credentials.     

Theoretical Treatment of a Cathodic Stripping Mechanism of an Insoluble Salt Coupled with a Chemical Reaction in Conditions of Square Wave Voltammetry. Application to 6‐Mercaptopurine‐9‐D‐Riboside in the Presence of Ni(II)

Cathodic stripping mechanism of an insoluble salt coupled with a homogenous chemical reaction is considered both theoretically and experimentally under conditions of square‐wave voltammetry. For the mercury electrode in aqueous solution, the electrode reaction is described as L(aq)+Hg(l)=HgL(s)+2e^?, where L(aq) is the reactive ligand that forms a sparingly soluble compound HgL(s). The electrode reaction is coupled with a homogenous, first‐order chemical reaction, A(aq)=L(aq). Theoretical predictions are confirmed by experiments with 6‐mercaptopurine‐9‐D‐riboside in the presence of nickel(II) ions.     

Miniaturized optical chemosensor for flow-based assays

A cost-effective, highly compact, and versatile optoelectronic device constructed of two ordinary light emitting diodes compatible with optosensing films has been developed. This fibreless device containing chemoreceptor, semiconductor light source, and detector integrated in a miniaturized flow-through cell of low microliter internal volume works as a complete photometric chemical sensor suitable for detection in flow analysis. The operation of the developed device under nonstationary programmable-flow conditions offered by sequential injection analysis has been demonstrated using Prussian Blue film as a model optical chemoreceptor. The unique spectroelectrochemical properties of the sensing material enable its use for optical sensing of redox species, whereby ascorbic acid and hydrogen peroxide have been chosen as model analytes. The reported SI-sensor system features fast and reproducible determination of both analytes in the submillimolar range of concentrations. The construction concept demonstrated in this work can be easily applied to other kinds of optical sensors based on absorbance sensing films.