HPLC and GC Methods for Determination of Lubricants and Their Evaluation in Analysis of Real Samples of Polyethylene

High performance liquid chromatography (HPLC) and gas chromatography (GC) are introduced for analysis of polymer lubricants (stearamide, oleamide and erucamide). In the HPLC method, a reverse phase octadecylsilane (ODS) column along with acetonitrile/methanol (60:40) as a mobile phase were used. Detection of analytes was performed by a UV detector at 202 nm. The analysis time was less than 8 min. In the GC method, polar capillary column and flame ionization detector (FID) were used for separations and detection, respectively. The analysis time by GC was longer than HPLC and was about 30 min. Limits of detection, linear range and repeatability of both methods are similar, but determination of oleamide in real samples by HPLC method is difficult due to complexity of the initial part of HPLC chromatogram in polyethylene samples. That problem is not observed in the GC method. Detection limits in both methods for all analytes are lower than 0.003% which are much lower than the amount of lubricants in commercial polymers (0.05–0.2%).     

Flow-through optical fiber sensor for automatic sulfide determination in waters by multisyringe flow injection analysis using solid-phase reflectometry

A software-controlled flow-through optical fiber diffuse reflectance sensor capitalized on the implementation of disk-based solid-phase pre-concentration schemes in a multisyringe flow injection analysis (MSFIA) set-up is proposed for the trace determination of sulfide in environmental waters and wastewaters. The fully automated flowing methodology is based on Fischer's coupling reaction of sulfide with N,N-dimethyl-p-phenylenediamine (DMPD) in the presence of Fe(iii) as oxidizing reagent in a 0.5 M HCl medium. The on-line generated methylene blue dye is subsequently delivered downstream to a dedicated optode cell furnished with an octadecyl-chemically modified (C(18)) disk, while continuously recording the diffuse reflectance spectrum of the pre-concentrated compound. A double regeneration protocol is finally executed to warrant minimum background noise and negligible baseline. Under the optimized chemical and hydrodynamic conditions, the optosensing MSFIA method features coefficients of variation better than 0.7%(n= 10) at 50 microg l(-1) concentration, a linear working range of 20-200 microg l(-1) sulfide, a 3sigma(blank) detection limit of 2.9 microg l(-1) sulfide and an injection throughput of 8 h(-1) for a pre-concentration sample volume of 2.9 ml. The interfacing of the robust and versatile multisyringe flow injection-based optode with a plug-in spectrophotometer furnished with a light emitting diode assures the miniaturization of the overall flow analyzer, which is, thus, readily adaptable to real-time monitoring schemes. The potential of the multisyringe flow method was assessed via the determination of sulfide traces in water samples of different complexity (namely, freshwater, seawater and wastewater).     

The addition of pentafluorosulfur bromide to fluoroolefins II

This paper reports the preparation, properties, and structure of new SF₅Br-fluoroolefin adducts. The extent and direction of SF₅Br addition to fluoroolefins have been studied with seven fluoroolefins. Steric factors appear to be important for this addition.     

Anion-receptor molecules: Macrocyclic and macrobicyclic effects on anion binding by polyammonium receptor molecules

The stability constants for anion binding by the acyclic hexaamine 1 , its macrocyclic analogue 2 , and the bicyclic compound 3 in their protonated forms are reported. Compound 3 forms stable and selective complexes with halide ions, the stability sequence being I^? > Br^? > Cl^?. Compound 2 forms more stable complexes with sulfate, oxalate, and malonate dianions than its acyclic analogue 1 and shows a better selectivity pattern. Compound 3 forms stronger complexes with oxalate^2? than 2 and shows a remarkably high binding selectivity between oxalate^2? and malonate^2?. The comparison of the ability of 1–3 to complex anions demonstrates the macrocyclic and macrobicyclic effects on anion binding stability and selectivity.     

Electrical conductivities of halide salts in aqueous formamide solutions

The electrical conductivities of sodium chloride and sodium iodide solutions in formamide-water mixtures of different composition have been measured at 25°C. From these data, the limiting equivalent conductances for these salts have been determined. The correspondingWalden products are compared together with the one reported for sodium bromide in the same solvent mixtures, and they are analysed as functions of the anion size. Further, the limiting ionic equivalent conductances are estimated for the different ions. The variation of the ionicWalden products with solvent composition is discussed in terms of ionic solvation and solvent structure.

---

Elektrische Leitfähigkeit von Halogensalzen in wäßrigen Formamid-Lösungen

Zusammenfassung Es wurden die elektrischen Leitfähigkeiten von Natriumchlorid- und Natriumjodidlösungen in Formamid-Wasser-Mischungen verschiedener Zusammensetzung bei 25°C gemessen. Aus diesen Daten wurden die Grenzäquivalenzleitfähigkeiten für diese Salze bestimmt. Die entsprechendenWalden-Produkte wurden mit den für Natriumbromid in den gleichen Lösungsmittelgemischen berichteten verglichen und hinsichtlich der Anionengrößen analysiert. Außerdem wurden die ionischen Grenzäquivalenzleitfähigkeiten für die einzelnen Ionen abgeschätzt. Die Variation der ionischenWalden-Produkte mit der Lösungsmittelzusammensetzung wurde bezüglich Ionensolvatation und Lösungsmittelstruktur diskutiert.

     

Complexation of palladium cyanide with imidazolidine-2-thione and its derivatives

Summary Pd(CN)₂ reacts with imidazolidine-2-thione (Imt), 1,3-diazinane-2-thione(Diaz), 1,3-diazipnane-2-thione (Diap) and their derivatives to yield complexes of stoichiometry [PdL₂(CN)₂] or [PdL(CN)₂] (L = Imt, Diaz or Diap and L = Imt having N-Me, Et or Pr substituents), which were characterized by elemental analysis, i.r., ¹H and ¹³C n.m.r. spectroscopy. Both mono- and bis ligand complexes are thought to be square planar with the monoligand binding to metal via sulphur (bridging) and the bis ligand via the monodentate thione group. The ¹³C enriched Pd(¹³CN)₂ complex was prepared and the ¹³C n.m.r. recorded. The C-2 resonance of ¹³C n.m.r. of Imt, Diaz or Diap complexes of the copper(I), silver(I), gold(I) and palladium(II) were compared.     

New nickel(II), copper(II), platinum(II) and palladium(II) complexes of a multidentate sulfur–nitrogen chelating agent

A new, potentially polydentate sulfur–nitrogen chelating agent, 2,6–bis(N-methyl-S-methyldithiocarbazato)pyridine (L) has been synthesized and characterized. With nickel(II) salts, the ligand yields complexes of empirical formula NiLX2·nH2O (X=Cl−, NCS− or NO3−; n=0 or 1) in which it behaves as a quadridentate NSSN chelating agent, coordinating to the nickel(II) ion via the two amino nitrogen atoms and the two sulfur atoms. Magnetic and spectral evidence support a distorted octahedral structure for these complexes. The ligand reacts with copper(II), platinum(II) and palladium(II) salts to yield homo-binuclear complexes of general formula [M2LX4]·nSol (M=CuII, PtII or PdII; X=Cl− or Br−; n=0.5, 1 or 2; Sol=H2O, MeOH or MeCOMe), in which each of the metal ions is in a square-planar environment. These complexes have been characterized by a variety of physicochemical techniques. This revised version was published online in June 2006 with corrections to the Cover Date.     

Influence of oxidising agents in lead determination by hydride generation direct flame atomic absorption spectroscopy

Summary The influence of Cr₂O₇ ^2–, MnO₄ ^–, Ce⁴⁺, H₂O₂ and S₂O₈ ^2– as oxidising agents in lead determination as volatile covalent hydride using NaBH₄ is reported in this paper.The reaction conditions for every oxidising agents (pH, quantity and concentration of the oxidising agent, quantity and concentration of the NaBH₄ and reaction time) are optimized, determining sensitivity and detection limit by measuring the peak height.The recovery of lead from solution has been measured by flameless atomic absorption spectroscopy.A linear relationship the logarithm of absorbance values and the redox potential of the system is obtained with a correlation coefficient of 0.999. The results and their interpretation are given in this paper.

---

Der Einflu oxidierender Reagentien auf die Bleibestimmung mittels Flammenatomabsorptionsspektrometrie nach Hydridbildung

Zusammenfassung Es wird über den Einfluß der Oxidantien Cr₂O₇, MnO₄ ^–, Ce⁴⁺, H₂O₂ und S₂O₈ ^{2 –} auf die Bleibestimmung als kovalentes Hydrid berichtet. Für jede oxidierende Substanz werden die Reaktionsbedingungen optimiert (pH, Menge und Konzentration des Oxidans, Menge und Konzentration von NaBH₄ und Reaktionszeit), um Empfindlichkeit und Nachweisgrenze durch Peakhöhenauswertung zu bestimmen.Die Wiederfindungsrate wurde durch elektrothermale Atomabsorptionsspektrometrie von Blei in der Lösung bestimmt.Der Zusammenhang zwischen dem Logarithmus der Extinktion und dem Redoxpotential des Oxidans ergibt eine lineare Beziehung mit einem Korrelationskoeffizienten von 0.999. Die Ergebnisse und deren Interpretation werden in dieser Arbeit beschrieben.

---

---

Paper presented to Euroanalysis V. Cracow, August 1984.     

The surface catalytic mechanism: a comparative study with square-wave and staircase cyclic voltammetry

A pseudo-first-order catalytic mechanism in which both reactant and product of a redox reaction are strongly immobilized on an electrode surface is theoretically analysed under conditions of square-wave (SWV) and staircase cyclic voltammetry (SCV). A mathematical procedure is developed under diffusionless conditions. The relationships between the properties of the voltammetric response and both the kinetic parameters of the redox reaction and the parameters of the excitation signal are studied. The phenomenon of the quasi-reversible maximum is discussed. A comparative study between SWV and SCV is presented and the limitations and advantages of both techniques, from analytical and kinetic points of view, are discussed. The theoretical predictions are experimentally confirmed by the redox reaction of azobenzene in the presence of hydrogen peroxide as an oxidizing agent. Electronic Publication     

An electropolymerized aniline-based fiber coating for solid phase microextraction of phenols from water

An aniline-based polymer was electrochemically prepared and applied as a new fiber coating for solid phase microextraction (SPME) of some priority phenols from water samples. The polyaniline (PANI) film was directly electrodeposited on the platinum wire surface in sulfuric acid solution using cyclic voltammetry (CV) technique. The efficiency of new coating was investigated using a laboratory-made SPME device and gas chromatography with flame ionization detection for the extraction of some phenols from the headspace of aqueous samples. The scanning electron microscopy (SEM) images showed the homogeneity and the porous surface structure of the film. The results obtained proved the ability of this polymer as a suitable SPME fiber coating for trapping the selected phenols. Influential parameters affecting the extraction process were optimized and an extraction time of 50 min at 50 °C gave maximum efficiency, when the aqueous sample was saturated with NaCl and adjusted at pH 2. This new coating can be prepared easily in a reproducible manner and it is rather inexpensive and stable against most of organic solvents. The PANI thickness can be precisely controlled by the number of CV cycles. At the optimum conditions, the R.S.D. for a double distilled water spiked with phenol and chlorophenols at ppb level were 4.8-17% (n = 3) and detection limits for the studied compounds were between 0.69 and 3.7 ng ml⁻¹, except for phenol and 4-chlorophenol. The optimized method was successfully applied to some real-life water samples.