Effects of Magnetic Nanofluid Fuel Combustion on the Performance and Emission Characteristics

Although the compression ignition engines are a significant source of power, their detrimental emissions create considerable problems to the environment as well as to humans. The objective of the present experimental investigation is to examine the effects of the magnetic nanofluid fuels on combustion performance characteristics and exhaust emissions. In this regard, the Fe₃O₄ nanoparticles dispersed in the diesel fuel with the nanoparticle concentrations of 0.4 and 0.8 vol% were employed for combustion in a single-cylinder, direct-injection diesel engine. After a series of experiments, it was demonstrated that the nanoparticle additives, even at very low concentrations, have considerable influence in diesel engine characteristics. Furthermore, the results indicated that the nanofluid fuel with nanoparticle concentration of 0.4 vol% shows better combustion characteristics in comparison with that of 0.8 vol%. Based on the experimental results, NO _x and SO₂ emissions dramatically reduce, while CO emissions and smoke opacity noticeably increase with increasing the dosing level of nanoparticles.     

Gas chromatographic determination of some phenolic compounds in fuels and engine oil after simultaneous derivatization and microextraction

In this study, a simultaneous derivatization/air‐assisted liquid–liquid microextraction method has been developed for sample preparation of some phenolic compounds in fuels and engine oil. Analytes are transferred by back liquid–liquid extraction into NaOH solution and then are derivatized with butyl chloroformate and extracted simultaneously into carbon tetrachloride. The extracted derivatized analytes are analyzed using gas chromatography with flame ionization detection. The effect of extracting solvent type, derivatization agent and extraction solvent volumes, ionic strength of the aqueous solution, number of extraction cycles, etc., on the extraction efficiency is investigated. The calibration graphs are linear in the range of 3–10 000 μg/L. Enhancement factors, enrichment factors, and extraction recoveries are in the ranges of 497 to 1471, 571 to 991, and 60 to 109%, respectively. Detection limits are obtained in the range of 0.8 to 2.0 μg/L. Relative standard deviations for the extraction of each selected phenols are in the ranges of 2–4% for intraday (n = 6) and 3–6% (n = 5) for interday precisions for 200 μg/L. This technique is successfully applied for the extraction, preconcentration, and determination of the selected phenols in gasoline, kerosene, gas oil, and engine oil.     

Solid‐based disperser liquid–liquid microextraction for the preconcentration of phthalate esters and di‐(2‐ethylhexyl) adipate followed by gas chromatography with flame ionization detection or mass spectrometry

A new approach for the development of a dispersive liquid–liquid microextraction followed by GC with flame ionization detection was proposed for the determination of phthalate esters and di‐(2‐ethylhexyl) adipate in aqueous samples. In the proposed method, solid and liquid phases were used as the disperser and extractant, respectively, providing a simple and fast mode for the extraction of the analytes into a small volume of an organic solvent. In this method, microliter levels of an extraction solvent was added onto a sugar cube and it was transferred into the aqueous phase containing the analytes. By manual shaking, the sugar was dissolved and the extractant was released into the aqueous phase as very tiny droplets to provide a cloudy solution. Under optimized conditions, the proposed method showed good precision (RSD less than 5.2%), high enrichment factors (266–556), and low LODs (0.09–0.25 μg/L). The method was successfully applied for the determination of the target analytes in different samples, and good recoveries (71–103%) were achieved for the spiked samples. No need for a disperser solvent and higher enrichment factors compared with conventional dispersive liquid–liquid microextraction and low cost and short sample preparation time are other advantages of the method.     

Polypyrrole–montmorillonite nanocomposite as sorbent for solid‐phase microextraction of phenolic compounds in water

A fiber‐coated polypyrrole–montmorillonite nanocomposite was prepared for solid‐phase microextraction. The fiber coating can be prepared easily; it is mechanically stable and exhibits relatively high thermal stability. The prepared fiber was evaluated for the extraction of some phenolic compounds from aqueous sample solutions by gas chromatography–mass spectrometry. The effects of the extraction and desorption parameters including extraction time, extraction temperature, stirring rate, ionic strength, pH and desorption temperature and time have been studied. At optimum conditions, the repeatability for one fiber (n = 5), expressed as % relative standard deviation was between 6.5 and 7.8% for the phenolic compounds. The detection limits for the studied phenolic compounds were between 0.05–1.3 ng/mL. The developed method offers the advantage of being simple to use, with shorter analysis time, lower cost, thermal stability of the fibers, and high relative recovery in comparison to conventional methods of analysis.     

Identification of phytobioconstituents present in Simmondsia chinensis L. seeds extract by GC-MS analysis

Simmondsia chinensis L. commonly called as Jojoba and belongs to family Simmondsiaceae. It has shown positive pharmacological activities of these compounds which include antidiabetic, antirheumatic, anthelminthic, antipsoriatic, antioxidant, antiepileptic, antigonorrheal, analgesic, anti-inflammatory, and pesticidal activity of jojoba. The multifaceted action of numerous bioactives existing in the seed extract with therapeutic activity have attracted great research interest by pharmaceutical industries. n-hexane extract of Simmondsia chinensis L. (SC) Seeds was analysed by gas chromatography-mass spectroscopy for identification and characterization of phytobioconstituents and its therapeutic claim by traditional system. The major compounds discovered in SC seeds extract are cis-9-octadecen-1-ol (24.85%), 9-octadecen-1-ol, (Z)- (18.24%), Stigmast-5-en-3-ol (14.10%), Ergost-5-en-3-ol, (3-β)-ol (5.26%), (Z)-14-tricosenyl formate (5.24%), Thiositosteroldisulfide (3.64%), Silane, Dimethyl (dimethylpentyloxysilyloxy) tetradecyloxy- (3.41%), Ergost-5-ene, 3-methoxy-, (3β,24R)- (2.55%), Ergosta-5,22-dien-3-ol (2.22%), 1,19-eicosadiene (2.17%), Pentacosane (2.02%), Stigmasta-5,22-dien-3-ol (1.64%), 1,19-eicosadiene (1.57%), 9-octadecen-1-ol, (Z)- (1.46%), 9,19-cyclo-9β-lanostan-3β-ol, 24-methylene- (1.14%), (9Z)-9-octadecenyl palmitate (1.50%), Hexadecanoic acid, 9-octadecenyl ester, (Z) (1.37%), 9Z)-9-octadecenyl (9Z)-9-hexadecenoate (1.01%). The hexane extract of Simmondsia chinensis seeds comprises various polar and nonpolar phytobioconstituents. These compounds were established qualitatively via GC-MS evaluation. GC-MS reports will be promising in pharmaceutical sector in identification of variety of Phytobioconstituents in distinct plant extracts, polyherbal extract and the standardization of particular plant materials.     

Riboflavin as a green sorbent in dispersive micro-solid-phase extraction of several pesticides from fruit juices combined with dispersive liquid–liquid microextraction

A vortex-assisted dispersive micro-solid-phase extraction procedure using a new and green sorbent was developed as a simple, fast, and efficient sample preparation method for the extracting five pesticides in several fruit juice samples. In this study, for the first time, riboflavin was used as an efficient sorbent. A few milligrams of riboflavin was directly added into the aqueous solution containing the analytes to adsorb them. After adsorption the analytes, they were desorbed and more concentrated by a dispersive liquid–liquid microextraction procedure. The influence of several effective parameters such as amount of riboflavin, pH, vortex time, eluent nature and volume, and extraction solvent type and volume on the extraction efficiency was investigated. In optimal conditions, linear ranges of the calibration curves were broad. The limits of detection and quantification were attained in the ranges of 0.56–1.5  and 1.9–0.52 ng mL⁻¹, respectively. The proposed method demonstrated to be suitable for concurrent extraction of the studied pesticides in various fruit juice samples with high enrichment factors (320–360) and precision (relative standard deviation ≤7.8% for intra- [n = 6] and interday [n = 4] precisions at a concentration of 25 ng mL⁻¹ of each pesticide).     

Observation of B-->eta'K* and evidence for B+-->eta'rho+

We present an observation of B-->eta'K*. The data sample corresponds to 232x10(6) BB[over ] pairs collected with the BABAR detector at the PEP-II asymmetric-energy B factory at the Stanford Linear Accelerator Center. We measure the branching fractions (in units of 10(-6)) B(B(0)-->eta'K*0)=3.8+/-1.1+/-0.5 and B(B+-->eta'K*+)=4.9(1.7)(+1.9)+/-0.8, where the first error is statistical and the second systematic. A simultaneous fit results in the observation of B-->eta'K* with B(B-->eta'K*)=4.1(-0.9)(+1.0)+/-0.5. We also search for B-->eta'rho and eta'f(0)(980)(f(0)-->pi+pi-) with results and 90% confidence level upper limits B(B+-->eta'rho+)=8.7(-2.8-1.3)(+3.1+2.3) (<14), B(B(0)-->eta'rho0)<3.7, and B(B(0)-->eta'f(0)(980)(f(0)-->pi+pi-))<1.5. Charge asymmetries in the channels with significant yields are consistent with zero.     

On the existence of chaotic circumferential waves in spinning disks

We use a third-order perturbation theory and Melnikov's method to prove the existence of chaos in spinning circular disks subject to a lateral point load. We show that the emergence of transverse homoclinic and heteroclinic points lead, respectively, to a random reversal in the traveling direction of circumferential waves and a random phase shift of magnitude pi for both forward and backward wave components. These long-term phenomena occur in imperfect low-speed disks sufficiently far from fundamental resonances.     

Analytical quality solid-state composite reference electrode manufactured by injection moulding

An injection moulding method was used for fabricating solid-state reference electrodes (Ag/AgCl type) based on a polymer/inorganic salt composite. In this method, a silver/silver chloride wire was placed inside a mould into which the mixture of polymer and inorganic salt was injected. The obtained solid-state composite reference electrodes were extensively tested to study the influence of different parameters such as solution composition, the concentrations and mobility of ions and pH on the potential stability of the electrodes. These experiments revealed that the composite reference electrodes are insensitive to the matrix effect, have excellent potential readings stability and considerably reduced leakage of inorganic salt. The composite reference electrodes were compared favourably to high-quality commercial reference electrodes. It was concluded that the composite reference electrodes obtained by injection moulding are of analytical quality allowing for continuous, prolonged and intensive usage.     

A Silver Bite: Crystalline Heterometallic Architectures Based on Ag–π Interactions with a Bis‐Dipyrrin Zinc Helicate

An unprecedented mode of assembly of helical motives and Ag^I ions in the crystalline state is described. The combination of a Zn^II helicate based on a 2,2′‐bisdpm bearing peripheral benzonitrile moieties with AgX salts, leads to the formation of a tetranuclear core containing Ag–π interactions. Depending on the coordinating ability of the X^? anion and the solvents used, the tetranuclear complex self‐assembles into coordination polymers of varying dimensionality. From the sequence of coordination events (Ag–π or Ag–peripheral site), one may envisage two possible construction scenarios. However, the Ag–π as primary event seems reasonable owing to the rather weak binding propensity of the nitrile group and the chelating nature of the π‐clefts.