Chelate and intramolecular ion-pair formation: A guiding concept for structure/selectivity relationships in the liquid-liquid extraction of alkali and alkaline earth metal ions by anionic crown ether derivatives

Crown ether dyes with pendent anionic side-arms were synthesized for extractionspectrophotometry of alkali and alkaline earth metal ions. Dramatic changes in metal selectivity were obtained simply by changing the nature of the anionic side-arm on the same crown ether skeleton. A structure/metal selectivity relationship is discussed in detail in terms of “chelate” and “intramolecular ion-pair” formation. Small metal cations (high charge density) are preferred in the extraction by a crown ether reagent with a charge-localized anionic side-arm through the formation of a “chelate”. Large metal cations (low charge density) are preferred in the extraction by reagents with a charge-delocalized anionic side-arm through the formation of an “intramolecular ion-pair”. Steric restrictions imposed by the side-arm on the metal ion approaching the crown ether are also important factor in controlling the selectivity of these reagents.     

Magnetic circular dichroism of theA andB bands in KI:Ga+, KI:In+, and KI:Sn2+

Magnetic circular dichroism (MCD) of theA- andB-absorption band region has been obtained at 4.2 K and 50 kG in KI:Ga⁺, KI:In⁺, and KI:Sn²⁺. The MCD spectra indicate the complex nature of these bands more clearly than the absorption spectra themselves do. TheA-band MCD consists in all cases of a positive and a negative part reflecting the structure of the absorption band. TheB-band MCD shows three peaks, two positive peaks at 4.34 and 4.41₅ eV (4.09 and 4.17₅ eV) and a negative peak at 4.38 eV (4.12₅ eV) in KI:Ga⁺ (KI:In⁺). TheB-band in KI:Sn²⁺ consists of a shoulder (b ₀) at 3.76 eV and a main band which has at least 5 sub-peaks (b ₁~b ₅) at 3.82₁, 3.84₁, 3.86₁, 3.88₀, and 3.89₅ eV; each of the subpeaks (b ₁~b ₅) gives a derivative-like MCD.The MCD shape functionf() for the transitiona _1g ² a _1g t _1u has been obtained for one set of parameter values by using the classical Franck-Condon approximation and the Monte Carlo integration method. The result can explain the observed salient features of theB- as well asA-band MCD's, indicating the validity of the Franck-Condon approximation and the interaction mode coordinates.     

Preparation of Ring and Chain Condensed Oligophosphates

Preparations of small-ring and short-chain condensed phosphates were made by dry and wet processes, respectively. The crystallization of tetra- hexa-, and octaphosphates from the phosphate solution was not easy, and metal salts of these oligophosphates were amorphous and unstable at normal temperature. Guanidine tetraphosphate and ammonium hexaphosphate were crystalline and stable at normal temperature.     

Synthesis and lyotropic liquid crystal properties of chiral helical polycarbodiimides

Chiral helical polymers have been expected to exhibit optical activity with a significantly large optical rotation power. In this paper polymethylphenylethylcarbodiimides (Poly-PhEMCDI) with helical structure were synthesized by the insertion polymerization of a corresponding chiral monomeric carbodiimide initiated by a copper complex. The circular dichroism spectra and optical rotation power induced by the ordered rigid main chain helical structure of polycarbodiimides, in solution and as cast films, were studied. Polycarbodiimides have a rigid rod helical structure and form lyotropic liquid crystal (LLC) in organic solvents such as dichloromethane (DCM), chloroform and THF. The LLC phase was studied using polarizing optical microscopy and X-ray diffraction. A chiral nematic phase was formed in DCM and chloroform in the concentration range 20–36%. Spherulites were formed in more concentrated solution. The formation of a LLC phase in polycarbodiimides organic solutions makes it possible to align the polymer helical chain to form an ordered film for electro-optical applications.     

Alignment control of liquid crystals on surface relief gratings

Liquid crystal alignment layers of a high T _g polymer containing an azobenzene moiety are prepared by photofabrication of a surface relief grating (SRG). The interference pattern of a circular and linearly polarized Ar⁺ laser beam generated the surface relief grating and the morphology was detected by atomic force microscope. The optical anisotropy of the films was investigated by polarizing optical microscopy. The orientation of the optical axis of the film mainly depends on the direction of the initial polarization plane. Nematic liquid crystals were aligned parallel to the direction of the grating, but the pretilt angles of the liquid crystals were nearly zero. Irradiation with homogeneous linearly polarized light could also align liquid crystals, but this alignment capability was weaker than that of the SRG film.     

Temperature dependence of the lattice locations of boron implanted in germanium

The β-NMR of the probe atom ¹²B implanted in In-doped germanium was measured as a function of temperature. As a result, three resonances were observed: sharp and broad resonances around the Larmor frequency and a resonance split by the electric quadrupole interaction. It was found that the appearance of the resonances is similar to the case of Si host (Izumikawa et al. Hyperfine Interact. 136/137:559–605, 2001). The quadrupole coupling constant for the split resonance was deduced as ∣eqQ/h∣ = 252(3) kHz under the assumption that it has <111> axial symmetry. And furthermore, assuming that the defect atom jumps thermally between the identical defect sites, the activation energy of the jump was deduced as 0.4 ± 0.1 eV.     

Temperature dependence of methanol and ethanol vapor sorption in polyhedral oligomeric silsesquioxane (POSS) containing methacrylate membranes

This study aimed to determine the solubility and temperature dependence of methanol and ethanol vapor caused by the difference in the substituents of polyhedral oligomeric silsesquioxane (POSS)-containing polymethacrylate membranes and the spacer length between the backbone and POSS backbone. Vapor sorption of methanol and ethanol was measured at 25°C, 35°C, and 45°C for three kinds of POSS-containing polymer membranes, namely, poly(methacryl isobutyl POSS), poly(methacrylate isobutyl POSS), and poly(methacryl phenyl POSS). The primary structures of the three POSS-containing polymer chains were columnar. The solubility of alcohol vapor on the POSS-containing polymer membranes followed the mechanism of solid adsorption and not the general dissolution diffusion. The sorption amount at all three temperatures was related to the surface area of the cylindrical primary structure and the solid adsorption property of the alcohol molecule of the POSS substituent. The sorption amount increased because of the large surface area and adsorption property of alcohol molecules. Although a typical glassy polymer shows exothermic mixing and a rubbery polymer displays endothermic mixing, the sample with the POSS substituent of isobutyl group exhibited an unusual behavior of endothermic mixing despite being a glassy polymer.     

Growth of 2-methyl-4-nitroaniline (MNA) crystals by the bridgman method

Organic single crystals of 2-methyl-4-nitroaniline (MNA) up to 3 mm in diameter and 20 mm in length have been successfully grown by the Bridgman method using the purified reagent by sublimation. The crystals are transparent and yellow in colour by controlling the growth conditions. In the spectra of yellow coloured crystals no absorption peak is observed until about 450 nm. Also, the crystals of MNA have the two cleavage planes (311 ) and (010).     

Operating Limits for Stable Growth of Silicon Fibers with Diameter Less Than 150 μm by Modified μ-PD Method

The μ-PD method originally developed for oxide crystals has been modified and applied for filamentary silicon crystal growth. Our main modification of μ-PD method is concerned with an arrangement of melt permeable feeder which is inserted into the nozzle. The feeder finishes by a sharp tip the diameter of which (is almost the same as that of the desired semiconductor fiber, i.e., less than 150 μm. Silicon fibers were grown from the small liquid pool at the end of the feeder. Three types of crucible-die arrangement were designed and tested. The best results were obtained with the help of inclined insert made of graphite fibers because of its ability to quench oscillations and longer operation life. Fiber crystals, 100 μm in diameter and 70 mm in length, have been grown successfully. Small meniscus stability, operating limits of μ-PD method and silicon carbide formation during the growth process are discussed.     

Structural characteristics of polysaccharide-based thermotropic liquid crystals

Main mesomorphic properties of cellulose and cello- and chito-oligosaccharide derivatives are overviewed, and their structuring principles are briefly discussed with some new analyses incorporated.