Vinyl polymerization. 413. Polymerization of vinyl monomer initiated by poly(vinylbenzyltrimethyl)-ammonium chloride

The polymerization of vinyl monomer initiated by an aqueous solution of poly(vinylbenzyltrimethyl)ammonium chloride (Q-PVBACI) was carried out at 85°C. Styrene, p-chlorostyrene, methyl methacrylate, and i-butyl methacrylate were polymerized, whereas acrylonitrile and vinyl acetate were not. The effects of the amounts of vinyl monomer, Q-PVBACI, and water on the conversion of vinyl monomer were studied. The overall activation energy in the polymerization of styrene was estimated as 79.1 kJ mol^?1. The polymerization proceeded through a radical mechanism. The selectivity of vinyl monomer was discussed by “a concept of hard and soft hydrophobic areas and monomers.”     

NMR and quantum chemical study on the OH...pi and CH...O interactions between trehalose and unsaturated fatty acids: implication for the mechanism of antioxidant function of trehalose

Trehalose is a disaccharide that attracts much attention as a stress protectant. In this study, we investigated the mechanism of the antioxidant function of trehalose. The spin-lattice relaxation times (T(1)) of (1)H and (13)C NMR spectra were measured to investigate the interaction between trehalose and unsaturated fatty acid (UFA). We selected several kinds of UFA that differ in the number of double bonds and in their configurations (cis or trans). Several other disaccharides (sucrose, maltose, neotrehalose, maltitol, and sorbitol) were also analyzed by NMR. The T(1) values for the (1)H and (13)C signals assigned to the olefin double bonds in UFA decrease with increasing concentration of trehalose and the changes reaches plateaus at integer ratios of trehalose to UFA. The characteristic T(1) change is observed only for the combination of trehalose and UFA with cis double bond(s). On the other hand, from the (13)C-T(1) measurements for trehalose, the T(1) values of the C-3 (C-3') and C-6' (C-6) are found to change remarkably by addition of UFA. (1)H[bond](1)H NOESY measurements provide direct evidence for complexation of trehalose with linoleic acid. These results indicate that one trehalose molecule stoichiometrically interacts with one cis-olefin double bond of UFA. Computer modeling study indicates that trehalose forms a stable complex with an olefin double bond through OH...pi and CH...O types of hydrogen bonding. Furthermore, a significant increase in the activation energy is found for hydrogen abstraction reaction from the methylene group located between the double bonds that are both interacting with the trehalose molecules. Therefore, trehalose has a significant depression effect on the oxidation of UFA through the weak interaction with the double bond(s). This is the first study to elucidate the antioxidant function of trehalose.     

Site-selective photocycloadditions of 2-pyrones with electron-poor olefins and the derivation from the cycloadducts

Photosensitized cycloaddition of 4,6-dimethyl-2-pyrone ( 1 ) with methacrylonitrile ( 3b ) afforded two types of [2 + 2]cycloadducts, 4b and 6b , across the C₅-C₆ and C₃-C₄ double bonds in 1 , respectively. Photosensitized reactions of 1 with dimethyl maleate and dimethyl cyclobutene-1,2-dicarboxylate gave [2 + 2]cycload-ducts 4d, 4e across the C₅-C₆ double bond, in addition to [4 + 2]cycloadduct 9d or bicyclo[4.2.0]octadiene 10e . The photoreactions of methyl 2-pyrone-5-carboxylate ( 2 ) with 3b and 2-chloroacrylonitrile ( 3c ) gave [4 + 2]cycloadducts 5b, 5c in addition to [2 + 2]cycloadducts 11b and 11c across the C₅-C₆ double bond in 2 . The photocycloaddition mechanism was explained from results calculated by means of PM3-CI method. Namely, the site- and/or regio-selective products, 4, 5, 8, 9 and 10 were thought to come from the same site-selective radical intermediates in the case of electron-poor olefins. Pyrolysis and/or hydrolysis of the cycload-ducts 4e, 5b, 5c gave 5,6-dihydro-2-pyrone 12 or benzene derivatives.     

Photochemical study of [3(3)](1,3,5)cyclophane and emission spectral properties of [3n]cyclophanes (n = 2-6)

Thephotochemical reaction of [3(3)](1,3,5)cyclophane 2, which is a photoprecursor for the formation of propella[3(3)]prismane 18, was studied using a sterilizing lamp (254 nm). Upon photolysis in dry and wet CH2Cl2 or MeOH in the presence of 2 mol/L aqueous HCl solution, the cyclophane 2 afforded novel cage compounds comprised of new skeletons, tetracyclo[6.3.1.0.(2,7)0(4,11)]dodeca-5,9-diene 43, hexacyclo[6.4.0.0.(2,6)0.(4,11)0.(5,10)0(9,12)]dodecane 44, and pentacyclo[6.4.0.0.(2,6)0.(4,11)0(5,10)]dodecane 45. All of these products were confirmed by the X-ray structural analyses. A possible mechanism for the formation of these photoproducts via the hexaprismane derivative 18 is proposed. The photophysical properties in the excited state of the [3n]cyclophanes ([3n]CP, n = 2-6) were investigated by measuring the emission spectra and determining the quantum yields and lifetimes of the fluorescence. All [3n]CPs show excimeric fluorescence without a monomeric one. The lifetime of the excimer fluorescence becomes gradually longer with the increasing number of the trimethylene bridges. The [3n]CPs also shows excimeric phosphorescence spectra without vibrational structures for n = 2, 4, and 5, while phosphorescence is absent for n = 3 and 6. With an increase in symmetry of the benzene skeleton in the [3(3)]- and [3(6)]CPs, the probability of the radiation (phosphorescence) process from the lowest triplet state may drastically decrease.     

The reactions of benzofuroxan with carbonyl compounds on the surface of solid catalysts

The cyclocondensations of benzofuroxan 1a with carbonyl compounds were smoothly and efficiently carried out by the adsorption of the components on the surface of silica gel or a molecular sieve to form a 2,3-disubstituted quinoxaline 1,4-dioxide. When the reactions using a molecular sieve 3A (powder) were carried out at 90°, the actual reaction times were reduced to 0.5-2 hours. Although Duerckheimer has reported the isolation of only the 7-substituted quinoxaline 1,4-dioxide when 5-methoxybenzofuroxan 1e was allowed to react with ethyl acetoacetate 2j , it produced only the 6-methoxy isomer as the reaction product by our method. 5-Carboxybenzofuroxan 1f did not react with the carbonyl compound.     

Thermal rearrangements of allyl 2,2-dichlorovinyl and 1,2,2-trichlorovinyl sulfides

Unique rearrangements of allyl 2,2-dichlorovinyl and 1,2,2-trichlorovinyl sulfides have been found. On heating the former gave 1,2-dichloro-l,4-pentadienes and the latter 2,3-dichloro-5-chloromethyl-4,5-dihydrothiophenes and 3,5,6-trichloro-3,4-dihydro-2H-thiopyranes .     

Oxytelluration of olefins to (β-alkoxy- and β-hydroxy-alkyl)aryltellurium dihalides and their reactions with reducing agents and aqueous NaOH

Treatment of olefinic hydrocarbons with phenyltellurium tribromide or a mixture of diphenylditelluride and bromine in alcohol affords (β-alkoxyalkyl)phenyltellurium dibromides in fair to good yield (alkoxytelluration of olefins). Various aryltellurium trichlorides, diphenylditelluride/CuCl₂, and phenyltellurocyanate/CuCl₂ can be used for the preparation of (β-alkoxyalkyl)aryltellurium dichlorides. Similar reactions in aqueous tetrahydrofuran or aqueous t-butyl alcohol result in the formation of the corresponding β-hydroxy compound (hydroxytelluration of olefins). The reaction is trans stereospecific in the cases of cis-2-butene and cis- and trans-4-octenes and regiospecific in the cases of all terminal olefins examined (1-hexene, 1-octene, 1-decene, styrene, α-methylstyrene, 2-methyl-1-pentene, and isobutylene), tellurium species attacking the terminal carbon solely. The diorganyltellurium dihalide produced is reduced to the corresponding diorganyltelluride by reducing agents such as N₂H₄, Na₂S, Na₂S₂O₃, and NaHSO₄ in aqueous solution. Treatment of the diorganyltellurium dibromide with aqueous NaOH affords either an allylic ether (by telluroxide elimination) or a telluroxide depending on the structure of the telluroxide.     

Monolayer properties of mixtures of poly(n-stearyl methacrylate), poly(n-lauryl methacrylate), and their corresponding copolymers

The monolayer properties of poly(n-stearyl methacrylate), poly(n-lauryl methacrylate), and their mixtures at various ratios of the two polymers have been studied from the measurements of their surface pressure–area isotherms at air–water interface. The monolayer properties of their mixtures have been compared with those of their corresponding copolymers. The results show that the isotherms of the mixed monolayers have two break points at higher pressures than that of poly(n-lauryl methacrylate). This suggests that the mixtures may form more stable films that consist of separate phases of the two homopolymers, although each phase may contain a small amount of the other. The isotherms of the copolymer monolayers indicate a phase transition from liquid condensed to solid film between 50 segment mole % and 70% poly(n-stearyl methacrylate). The monclayer of these copolymers has properties that differ from those of the corresponding mixtures of two pure homopolymers and is more compatible than the mixtures of pure homopolymers.     

A stannylene strategy for regioselective acylation and phosphorylation of 1,2-cyclohexylidene-myo-inositol. Its convenient resolution and phosphatidylinositol synthesis

The bis(dibutylstannylene) derivative of 1,2-cyclohexylidene-myo-inositol reacted with (S)-O-acetylmandeloyl chloride and diphosphate tetraesters to give 3,6-dimandelate and 3-phosphate, respectively. Using the stannylene methodology for the optical resolution and regioselective phosphorylation of the ketal, a concise synthesis of phosphatidylinositol with the natural configuration was accomplished.     

Diacetoxylation of conjugated dienes with thallium(III) acetate in acetic acid

The reaction of conjugated dienes such as 1,3-butadiene, isoprene, 2,3-dimethyl-1,3-butadiene, 2,5-dimethyl-2,4-hexadiene, 1,3-cyclopentadiene, and 1,3-cyclohexadiene, with thallium(III)acetate in acetic acid at 10–65° for 0.5–15 hr affords an isomeric mixture of the corresponding diacetoxyalkenes (1,2- and 1,4-addition products) in 10–92% yields. The 1,2-addition products are predominantly formed in all cases examined except the case of 1,3-cyclopentadiene. The reaction is assumed to proceed through acetoxythallation and dethallation steps, the latter step being accompanied and/or followed by an attack of acetoxyl group. An initial attack of thallium moiety is proposed to occur mainly at C-1 and C-2 carbons in the cases of linear terminal dienes and cyclic dienes, respectively.