Synthesis of diazepinoquinoxalines and imidazolobenzopteridines

Diazepinoquinoxalines 3, 4 and imidazolobenzopteridines 5, 6a-d, 7a-d, 8, 9 were synthesized from 3-allylamino-6,7-dimethyl-2-quinoxalinecarboxamide ( 1 ) and 2-allylamino-6,7-dimethyl-3,4-dihydrobenzo[g]pteridin-4-one ( 2 ) by the intramolecular cyclization using phenylselenenyl chloride.     

Synthesis of polyarylamines by vinylogous nucleophilic substitution polymerization of bis(4-chloro-3-nitrophenyl) sulfone with diamines

A series of new polyarylamines was prepared by the vinylogous nuclephilic substitution polymerization of bis(4-chloro-3-nitrophenyl) sulfone with both aromatic and aliphatic diamines. The synthesis involves the solution polycondensation in a polar aprotic solvent at elevated temperatures, a tertiary amine being used as an acid acceptor. Of these solvents, dimethyl sulfoxide and N-methyl-2-pyrrolidone were the most effective for the preparation of high molecular weight polymers. The polyarylamines having inherent viscosities in the range of 0.1–0.5 were all amorphous and highly soluble in polar aprotic solvents. Thermogravimetric analysis under both air and nitrogen atmospheres indicated that rapid decomposition began above 300°C for the polyarylamines from aromatic diamines.     

Polydimethylsiloxane connection for quartz microchips in a high-pressure system.

An interconnecting technique, the "PDMS connection method", for quartz microchips in a high-pressure system is presented. The connection between quartz microchips is an essential technology for modular microfluidic devices, such as microchip-HPLC. PDMS was applied to the seal material, being spread on the seal side of the chips, and set into the metal housing. The characteristics of the PDMS connection method concerning pressure resistance and the extension of the peak were examined. The experimental results showed a good seal at 5 MPa, which seem to be sufficient for realizing microchip-HPLC utilizing a monolithic silica capillary column as a separation medium. The influence of the extra column effect on chromatographic separation was almost the same as in the case using a commercial union fitting. In addition, the PDMS connection enabled the detachability of chip-based modules with user-friendliness. Our experimental findings suggest that the novel PDMS connection method can possibly be applied as a generic technology in high-pressure microTAS.     

On-off-switched crown-metal complexation by photoinduced intramolecular tail (ammonium)-biting

New photoresponsive crown ethers (1H⁺) having a crown ring and an ammoniumalkyl (H₃N⁺(CH₂)_n ^–, n=4,6,10) group attached to the two sides of an azobenzene have been synthesized. Photoresponsive properties (thermal isomerization, metal extraction, membrane transport, etc.) were examined, and the results were compared with those of other photoresponsive crown ethers and complexons.     

Interaction of cubosomes with plasma components resulting in the destabilization of cubosomes in plasma

Cubosomes are novel dispersed nanoparticles with bicontinuous cubic phases of monoolein in their interior. We investigated their disintegration process in plasma by in vitro and in vivo studies. Cubosomes were incubated with whole plasma or plasma components such as HDL, LDL, and albumin. The lypolysis study indicated lipolytic activity of whole plasma towards cubosomes. Gel filtration chromatography revealed that HDL, LDL and albumin interacted with cubosomes. HDL affected cubosomes’ integrity and gave rise to smaller particles which contained the components of both cubosomes and HDL. Upon incubation with LDL, cubosomes fused with LDL. Albumin was shown to take up monoolein out of the particles. Cubosomes were disintegrated by whole plasma as a result of the interaction with plasma components. It was concluded that in vivo observation of a long circulation time of a hydrophobic substance in cubosomes was due to the sustained behavior of cubosome remnant particles.     

Determination of the chemical nature of active surface sites present on bulk mixed metal oxide catalysts

CH3OH temperature programmed surface reaction (TPSR) spectroscopy was employed to determine the chemical nature of active surface sites for bulk mixed metal oxide catalysts. The CH3OH-TPSR spectra peak temperature, Tp, for model supported metal oxides and bulk, pure metal oxides was found to be sensitive to the specific surface metal oxide as well as its oxidation state. The catalytic activity of the surface metal oxide sites was found to decrease upon reduction of these sites and the most active surface sites were the fully oxidized surface cations. The surface V5+ sites were found to be more active than the surface Mo6+ sites, which in turn were significantly more active than the surface Nb5+ and Te4+ sites. Furthermore, the reaction products formed also reflected the chemical nature of surface active sites. Surface redox sites are able to liberate oxygen and yield H2CO, while surface acidic sites are not able to liberate oxygen, contain either H+ or oxygen vacancies, and produce CH3OCH3. Surface V5+, Mo6+, and Te4+ sites behave as redox sites, and surface Nb5+ sites are Lewis acid sites. This experimental information was used to determine the chemical nature of the different surface cations in bulk Mo-V-Te-Nb-Ox mixed oxide catalysts (Mo(0.6)V(1.5)Ox, Mo(1.0)V(0.5)Te(0.16)Ox, Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox). The bulk Mo(0.6)V(1.5)Ox and Mo(1.0)V(0.5)Te(0.16)Ox mixed oxide catalytic characteristics were dominated by the catalytic properties of the surface V5+ redox sites. The surface enrichment of these bulk mixed oxide by surface V5+ is related to its high mobility, V5+ possesses the lowest Tammann temperature among the different oxide cations, and the lower surface free energy associated with the surface termination of V=O bonds. The quaternary bulk Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox mixed oxide possessed both surface redox and acidic sites. The surface redox sites reflect the characteristics of surface V5+ and the surface acidic sites reflect the properties normally associated with supported Mo6+. The major roles of Nb5+ and Te4+ appear to be that of ligand promoters for the more active surface V and Mo sites. These reactivity trends for CH3OH ODH parallel the reactivity trends of propane ODH because of their similar rate-determining step involving cleavage of a C-H bond. This novel CH3OH-TPSR spectroscopic method is a universal method that has also been successfully applied to other bulk mixed metal oxide systems to determine the chemical nature of the active surface sites.     

Crystal structure of poly(p-benzamide)

Redetermination of the crystal structure of poly(p-benzamide) was made by using newly collected intensity data. The molecular conformation is TCTC, where the internal rotation angles about the N? C bond of the amide group and about the virtual bond of N-phenyl-C are T (trans) and C (cis) conformations, respectively. Two molecular chains pass through a rectangular unit cell with dimension, a = 7.75 Å, b = 5.30 Å, c (fiber axis) = 12.87 Å, and the space group, P2₁2₁2₁-D. The reflection observed at the spacing of 010 may be attributed to the reflection due to another crystal polymorph or the diffuse scattering due to disorder. © 1993 John Wiley & Sons, Inc.     

Water soluble cyclodextrin polymers: Their interaction with drugs

The complex forming ability of a water-soluble -cyclodextrin epichlorohydrin, polymer (CDPS) and its different molecular weight fractions was studied and compared with the complexing properties of -cyclodextrin (CD) and dimethyl-CD (DM-CD). CDPS was separated into two main fractions. CDPS and its fractions formed well soluble inclusion compounds with the studied drugs. The low molecular weight fraction formed rather stable complexes with small guest molecules, the high molecular weight fraction was found to be more efficient in binding larger substrates. Structural studies of furosemide-CD complexes were attempted by NMR spectroscopy.Presented at the Fourth International Symposium on Inclusion Phenomena and the Third International Symposium on Cyclodextrins, Lancaster, U.K., 20–25 July 1986.