Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Synthesis, structural characterization and ferrimagnetic property of MnPS3 intercalated with nickel(II) cyclopolyamine complex cations

Two new intercalation compounds were prepared by the reactions of Ni(II) cyclopolyamine complex cations with a preintercalate Mn_1−xPS₃K_2x(H₂O)_y, respectively, through “ion exchange” process. Their structures were characterized by elemental analysis, X-ray powder diffraction and infrared spectroscopy. The lattice spacing increased 0.567 and 1.093 nm with respect to the pristine MnPS₃. Ferrimagnetism of the intercalates was confirmed by SQUID experiment with T_c at 40 and 33 K, respectively.     

Ferromagnetic anomaly associated with the antiferromagnetic transitions in (donor)[Ni(mnt)2]-type charge-transfer salts

Three newly prepared [Ni(mnt)2] complexes, (HMTTF)[Ni(mnt)2], (ChSTF)[Ni(mnt)2], and (DBTTF)2[Ni(mnt)2], are reported (DBTTF = dibenzotetrathiafulvalene, ChSTF = 2,3-cyclohexylenedithio-1,4-dithia-5,8-diselanafulvalene, HMTTF = bis(trimethylene)-tetrathiafulvalene, and mnt = maleonitrile dithiolate). The former two compounds have usual DA-type (D = donor, A = acceptor) mixed stacks, whereas the DBTTF complex has DDDDAA-type 6-fold columns. These compounds are electrical insulators, but the HMTTF and ChSTF complexes exhibit chiT minima at 16 and 55 K, respectively, followed by chiT peaks at 8 and 16 K. Below these temperatures the ESR signal disappears, indicating antiferromagnetic transitions. The origin of the ferromagnetic interaction is explained either from the difference of the g values between the donor and the anion or from the intrinsic ferromagnetic interaction of the [Ni(mnt)2] anions.     

Cp/mas 13c nmr and Electron Diffraction Study of Bacterial Cellulose Structure Affected by Cell Wall Polysaccharides

Acetobacter xylinum was cultured in Schramm–Hestrin medium containing pectin (pectin medium), xylan (xylan medium), or glucomannan (mannan medium). X-ray diffractometry revealed that xylan and glucomannan affected the size of the cellulose crystals and their d-spacing values. Solid-state cross polarization magic angle spinning carbon-13 nuclear magnetic resonance spectroscopy indicated that the ratio of cellulose I was reduced by the addition of polysaccharides. These effects were more remarkable on the cellulose in the mannan medium than that in the xylan medium, and were scarcely observed in the pectin medium. Electron diffraction analysis revealed that these effects on hemicelluloses along cellulose microfibrils are continuous in the mannan medium and discontinuous in the xylan medium. These findings suggest that the uronic acid in the polysaccharides prevents interactions with cellulose leading to alterations of the structure of the cellulose crystal.     

Pre-irradiation induced grafting of styrene into crosslinked and non-crosslinked polytetrafluoroethylene films for polymer electrolyte fuel cell applications. II: Characterization of the styrene grafted films

Crosslinked and non-crosslinked polytetrafluoroethylene films (RX-PTFE and V-PTFE films, respectively) were irradiated by γ-ray and then grafted with styrene in liquid phase. Microscope FT-IR spectroscopy, TGA, solid state ¹³C CP/MAS and high resolution HS/MAS NMR spectroscopy, wide-angle X-ray diffraction (WAXD) study were used to get the structural information of the styrene grafted RX-PTFE and V-PTFE films. From microscope FT-IR spectra of the grafted RX-PTFE films, the “grafting front mechanism” was proved. TGA analysis showed that the grafted films have a small degradation step and two main degradation steps. In the ¹³C CP/MAS NMR spectra of the non-grafted films, there are no signal due to the absence of the hydrogen atom. While in the spectra of the grafted films, there are signals attributed to the polystyrene grafts. In the ¹³C HS/MAS NMR spectra of the grafted films, the relative intensity of the peaks attributed to the polystyrene grafts increased while the relative intensity of the peak attributed to PTFE matrix decreased with the increase in the DOG. From WAXD patterns, the intensity of the crystalline peak decrease with the increase in the DOG. The grafted films were sulfonated by chlorosulfonic acid and the results of highest IEC value exceeded 3.0. Those results will be reported in the near future.     

Dynamics of order formation by colloidal adsorption onto a substrate studied with Brownian dynamics

Colloidal adsorption and spontaneous ordering of adsorbed particles on a substrate was simulated using a three-dimensional simulation model for colloidal dispersion system with an adsorptive surface under a specified bulk concentration, where the particle-particle and particle-substrate interactions were modeled on the DLVO theory. The key process for order formation is considered to be the adsorption of a particle that induces the transition from incomplete order to perfect order, and is found to involve a stochastic nature due to an energy barrier which must be overcome for the system to reach ordered state. Also, a model was developed to predict the energy barrier for order formation based on direct observation of the key process. Further, a model to describe the stochastic nature of the process was developed and its quantitative validity was demonstrated. Through the examination of the key process, it is concluded that the mechanism of the order formation is composed of two successive processes and the rate-determining step varies depending on the ionic strength.     

Interaction of cubosomes with plasma components resulting in the destabilization of cubosomes in plasma

Cubosomes are novel dispersed nanoparticles with bicontinuous cubic phases of monoolein in their interior. We investigated their disintegration process in plasma by in vitro and in vivo studies. Cubosomes were incubated with whole plasma or plasma components such as HDL, LDL, and albumin. The lypolysis study indicated lipolytic activity of whole plasma towards cubosomes. Gel filtration chromatography revealed that HDL, LDL and albumin interacted with cubosomes. HDL affected cubosomes’ integrity and gave rise to smaller particles which contained the components of both cubosomes and HDL. Upon incubation with LDL, cubosomes fused with LDL. Albumin was shown to take up monoolein out of the particles. Cubosomes were disintegrated by whole plasma as a result of the interaction with plasma components. It was concluded that in vivo observation of a long circulation time of a hydrophobic substance in cubosomes was due to the sustained behavior of cubosome remnant particles.     

Crystal structure of poly(p-benzamide)

Redetermination of the crystal structure of poly(p-benzamide) was made by using newly collected intensity data. The molecular conformation is TCTC, where the internal rotation angles about the N? C bond of the amide group and about the virtual bond of N-phenyl-C are T (trans) and C (cis) conformations, respectively. Two molecular chains pass through a rectangular unit cell with dimension, a = 7.75 Å, b = 5.30 Å, c (fiber axis) = 12.87 Å, and the space group, P2₁2₁2₁-D. The reflection observed at the spacing of 010 may be attributed to the reflection due to another crystal polymorph or the diffuse scattering due to disorder. © 1993 John Wiley & Sons, Inc.     

Phase-death mode in two-coupled chemical oscillators studied with reactors of different volume and by simulation

The behavior of the phase-death mode (cessation of oscillations and transition to a steady state) in the two-coupled Belousov–Zhabotinsky reactions is studied in the asymmetric coupling. In an experiment, the types of synchronized modes and their regions were investigated as an extension of our previous study. This experiment is compared to a simulation using the two-coupled three-variable Oregonator models. The results confirm that the phase-death mode changes from “bistable” to “monostable” and reveal the stable region of the latter.     

Stereoselective synthesis of (Z)-fluoroalkenes directed to peptide isosteres: copper mediated reaction of trialkylaluminum with 4,4-difluoro-5-hydroxyallylic alcohol derivatives

Copper mediated alkyl-transfer reaction of trialkylaluminum (R₃Al) with (E)-4,4-difluoro-5-hydroxyallylic alcohol derivative smoothly proceeded to give the corresponding 2-alkylated 4-fluoro-5-hydroxyhomoallylic alcohol derivative with completely Z and 2,5-syn selective manner. Regio- and stereoselective conversion of the C5-hydroxyl group of the fluoroolefin thus obtained to amino group could be achieved through one-pot mesylation and azidation reaction.