Fabrication of high performance thin films from metal fluorocomplex aqueous solution by the liquid phase deposition

The hetro-structured oxide thin films from metal fluorocomplex solution have been prepared by the liquid phase deposition (LPD) method. The Pt/Nb₂O₅ and Au/Nb₂O₅ composite films can be prepared from a mixed solution of niobium source, H₃BO₃, Pt(NH₃)₄Cl₂ and HAuCl₄ aqueous solutions under the ambient temperature and atmosphere. In the case of Au/SiO₂ composite film, (NH₄)₂SiF₆ solution is used as a mother solution. The Pt and Au ionic species are deposited in Nb₂O₅ and SiO₂ matrices. They are reduced to their metallic state after treatment above 200 °C. The size of dispersed particles can be controlled by heat treatment temperature. It is also clear that, gold nanoparticles are also found to interact with SiO₂, although the interaction is smaller than that with Nb₂O₅ showing the size of Au nanoparticles remain smaller in Nb₂O₅ that in SiO₂.     

First asymmetric total synthesis of tetrodotoxin

Tetrodotoxin, a toxic principle of puffer fish poisoning, is one of the most famous marine natural products because of the complex structure having many functional groups and its potent biological activity leading to death. Since the structure elucidation in 1964, this toxin has been recognized as a formidable target molecule for total synthesis. We have recently achieved the first asymmetric total synthesis from 2-acetoxy-tri-O-acetyl-d-glucal as a chiral starting material. The highly hydroxylated cyclohexane ring was constructed by Claisen rearrangement and regioselective hydroxylations of an acetone moiety and an intramolecular directed aldol condensation of the precursor having methyl ketone with dihydroxyacetone, which was synthesized through Sonogashira coupling. Installation of nitrogen functionality was unsuccessful through an attempted Overman rearrangement. We, therefore, employed a new intramolecular conjugate addition strategy between the carbamate and unsaturated ester groups. The alpha-hydroxyl lactone moiety was synthesized through an intramolecular epoxide opening by the Z-enolate of aldehyde, which was followed by oxidation-reduction of the resulting cyclic vinyl ether. The lactone was then converted to a protected ortho ester, and then gunanidinylation was followed by cleavage of the 1,2-glycol to give the fully protected tetrodotoxin. Selection of the protective groups has finally led us to accomplish the total synthesis of tetrodotoxin in an enantiomerically pure form. All the stereogenic centers were controlled with high selectivity, and the hydroxyl groups were differently protected to discriminate for the future analogue synthesis of a bioorganic program. The synthetic tetrodotoxin was purified by ion exchange chromatography and characterized to be identical with the natural compound.     

Analysis of the interaction between human plasma fibronectin and gelatin by affinity electrophoresis

The interaction between human plasma fibronectin and gelatin was analyzed by affinity electrophoresis, in which the fibronectin was subjected to electrophoresis in a 4% polyacrylamide gel in the presence and absence of gelatin, as an affinity ligand, and the fibronectin band was stained by an immunoblotting method. The apparent dissociation constants (Kd) of fibronectin for gelatin were calculated from affinity plots based on the original affinity equation at different pHs, urea concentrations, and temperatures. The fibronectin exhibited much lower affinity in the presence of urea. The Kds at 37 degrees C were 1.49 X 10(-7) M, 2.50 X 10(-6) M, and 3.58 X 10(-6) M with 2 M, 3 M, and 4 M urea, respectively. The van't Hoff plots of Kd values against absolute temperature (T) showed that the value of log Kd decreased in proportion to the increase in the value of 1/T within the range of 15-50 degrees C. The standard enthalpy, the standard free energy change at 37 degrees C, and the entropy change at 37 degrees C for association were calculated to be -124.7 kJ/mol, -33.23 kJ/mol, and -295.1 J/mol/deg, respectively. These results suggest that a hydrophilic interaction, such as hydrogen bond or van der Waals interaction, plays an important role in the binding of plasma fibronectin to gelatin.     

Measurement of hyperfine structure constants,g values and tensor polarizability of excited states of Sm I

Atomic-beam laser spectroscopy with fluorescence detection is applied to investigate the hyperfine structure (hfs), Stark and Zeeman effects of the electric dipole transitions of Sm i. The measurements are performed for the four transitions of 0 → 15650.55, 292.58 → 15650.55, 292.58 → 15567.32, and 1489.55 → 16890.59 cm^-1. The hfs constants of the upper and lower levels and the isotope shifts of the transitions are determined. The tensor polarizability of the 15650.55 cm^-1 level is found to be α₂ = -556.2 ± 11.8 kHz/(kV/cm)². Thanks to the accurate g values of the lower levels [Childs, W.J., Goodman, L.S.: Phys. Rev. A 6, 2011 (1972)], the g values of the upper levels are obtained from the observed Zeeman splittings. The values are found to be -0.115907(79), 2.22259(20) and 1.599968(51) for the 15650.55 cm^-1 .1, 15567.32 cm^-1 and 16890.59.cm^-1 levels, respectively.     

Optical sensor for carbon dioxide combining colorimetric change of a pH indicator and a reference luminescent dye

A new optical CO₂ sensor based on the luminescence intensity change of the europium(III) complex tris(thenoyltrifluoroacetonato) europium(III) dihydrate ([Eu(tta)₃]) caused by the absorption change of various pH indicators—thymol blue, phenol red, or cresol red—with CO₂ was developed and its CO₂ sensing properties were investigated. For all the CO₂ sensors using pH indicators the observed luminescence intensity from [Eu(tta)₃] at 613 nm increased with increasing CO₂ concentration. The linear calibration method based on the plot of (I₁₀₀–I₀)/(I–I₀) versus the inverse of CO₂ concentration was suggested, where I₀ and I₁₀₀ were luminescence intensities at 613 nm of the CO₂ sensor film in 100% nitrogen and 100% gaseous CO₂. In all cases the plots showed good linearity and the correlation factors of the plots, r², were 0.991 for thymol blue, 0.990 for phenol red, and 0.998 for cresol red. The slopes of the plots (A/B) for thymol blue, phenol red, and cresol red were 2.2, 5.2, and 9.0%, respectively. The response times of the CO₂ sensor film were 4.0 s for thymol blue, 4.4 s for phenol red, and 8.8 s for cresol red for switching from nitrogen to CO₂, and the recovery times of films were 36 s for thymol blue, 39.2 s for phenol red, and 56.6 s for cresol red for switching from CO₂ to nitrogen. The signal changes were fully reversible and hysteresis was not observed during the measurements. The highly sensitive CO₂ sensor was developed using thymol blue as an indicator for the CO₂-sensing probe.     

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Nano sized crystalline particles/polymer hybrids were synthesized form designed metal-organic precursors. The newly developed method is composed of the synthesis of organic matrix by polymerization and the in situ nucleation and growth of crystalline oxide particles in the organic matrix below 100°C. The design of metal-organic precursor modified with polymerizable ligand and the selection of reaction conditions does influence the size and crystallinity of ceramic particles in organic matrix. The nano-sized magnetic particle/polymer hybrid exhibits the interesting feature of superparamagnetism and quantum size effect. The crystalline particles of BaTiO₃/, PbTiO₃/, and KNbO₃/polymer hybrids behave to be dielectric and show the typical electro-rheological behavior.     

Self-assembly patterning of colloidal crystals constructed from opal structure or NaCl structure

We developed a novel self-assembly process to fabricate an orderly array of particle wires constructed from a close-packed colloidal crystal without preparation of patterned templates. A substrate was immersed vertically into a SiO2 colloidal solution, and the liquid surface moved downward upon evaporation of solution. Particles formed a mono-/multiparticle layer, which was cut by the periodic drop-off of solution. The orderly array of particle wires was successfully fabricated, showing the suitability of the self-assembly process for the fabrication of nano-/microstructures constructed from nano-/microparticles or blocks. The mechanism of the assembly process and control of thickness, width, and interval of particle wires were further discussed. Moreover, an array of particle wires constructed not from close-packed face-centered cubic (or hexagonal close packed) structure but from two kinds of particles was realized to fabricate an array of particle wires with NaCl structure by this self-assembly process.     

Determination of 21-hydroxycorticosteroids in human urine by high-performance liquid chromatography with fluorescence detection

A simple and sensitive high-performance liquid chromatographic method with fluorescence detection for the determination of nineteen 21-hydroxycorticosteroids is described. The corticosteroids are oxidized by cupric acetate to form the corresponding glyoxal derivatives. The derivatives are converted into fluorescent quinoxalines by reaction with 1,2-diamino-4,5-methylenedioxybenzene, a fluorogenic reagent for alpha-dicarbonyl compounds. The quinoxalines are separated within 70 min on a reversed-phase column (TSK gel ODS-120T) by stepwise elution with mixtures of methanol, acetonitrile, and 1.0 M ammonium acetate. The detection limits are 0.14-29.4 pmol at a signal-to-noise ratio of 3 in a 50-microliter injection volume. This sensitivity permits precise determination of hydrocortisone, cortisone, corticosterone, and their tetrahydro derivatives in 500 microliters of normal human urine.     

Development of rectangular column structured titanium oxide photocatalysts anchored on silica sheets by a wet process

Commercially available powdered photocatalysts such as P-25 are known to show high photocatalytic performance. However, in practical use, their anchoring onto a substrate without any binders is still very difficult. The purpose of this study is to design and develop high-performance photocatalysts that can be anchored onto a substrate, and to this end we have prepared a titanium oxide photocatalyst using a wet process. The results of this study led to the successful development of rectangular column structured titanium oxide crystals which could be anchored onto silica sheets. The rectangular columnar crystal was 100- 500 nm wide and 1000- 5000 nm long. Moreover, investigations on the complete oxidation reaction of acetaldehyde into CO₂ and H₂O showed a high performance equivalent to that of the most efficient marketed powdered photocatalysts.     

Stimulatory effect of red light on starch accumulation in a marine green alga,chlamydomonas sp. strain MGA161

A marine green alga,Chlamydomonas sp. strain MGA161 was cultivated under illumination of red and white lights. The growth rate under red light illumination was almost the same as that in the basic conditions under white light illumination, but red light-grown cells accumulated almost twice as much starch as white light-grown cells. Although there was a slight decrease in carbonic anhydrase activity, red light-illuminated cells had almost 2.3 times the fructose-l,6-diphos-phatase activity of white light-illuminated cells. Red light might stimulate starch accumulation by increasing the amounts of enzymes related to carbon fixation through the phytochrome system. Cells grown under red light degraded 1.6 times as much starch and produced 1.7 times as much hydrogen and 1.6 times as much ethanol compared with cells grown under white light during 12 h of dark anaerobic fermentation.