Development of a novel potentiometric titration method for determination of polypropylene degradation

In this study, a novel potentiometric titration of hydroperoxide in degraded polypropylene (PP) is proposed. This titration is quite sensitive compared with the conventional ones such as UV and manual titrations, and its detection limit was about 2 meq/kg. The sensitivity was equal to that of molecular weight measurement by GPC for the degraded PP and, in addition, the volatilization behavior of the hydroperoxide could be detected. This titration was found to be very effective for the determination of PP degradation.     

Synthesis of the JKLM-ring fragment of ciguatoxin

A stereoselective synthesis of the LM-ring fragment has been achieved starting from a sugar derivative. A stereoselective synthesis of the JKLM-ring fragment has been achieved through a coupling between two segments via heteroconjugate addition, seven-membered ether ring formation mediated by an acetylene cobalt complex, and spiroketalization reaction.     

A new-type photoreaction of a carbonyl compound: Part 2. Photoinduced ω-bond dissociation in p-halomethylbenzophenone studied by time-resolved EPR technique and laser flash photolysis

Photodissociation of the carbon-X (X = Br and Cl) bonds in p-bromo- and p-chloromethylbenzophenone (BMBP and CMBP) in solution were investigated by time-resolved EPR and laser flash photolysis techniques. BMBP and CMBP were found to undergo ω-bond cleavage to yield the p-benzoylbenzyl radical (BBR) at 295 K, and the quantum yields (Φ_BBR) were determined. The CIDEP signal originated from BBR formed upon decomposition of CMBP was obtained while that for BMBP was absent. By using triplet sensitization of acetone, the efficiencies (_BBR) of the CX bond fission in the triplet states of BMBP and CMBP were determined. The agreement between the Φ_BBR and _BBR values for CMBP indicates that the CCl bond dissociation occurs only in the triplet state. In contrast to CMBP, the cleavage of the CBr bond in BMBP upon direct excitation was concluded to be the event only in the excited singlet state without triplet formation, whereas the triplet state was also reactive for ω-bond dissociation. The rate of CBr bond dissociation seemed to be greater than that of intersystem crossing from the S₁ to the T₁ state. Schematic energy diagrams of the excited states of BMBP and CMBP were shown, and the reaction profiles were discussed from the viewpoint of the CX bond enthalpies.     

Analysis of organotin compounds by grignard derivatization and gas chromatography-ion trap tandem mass spectrometry

The determination of organotin compounds in water using gas chromatography-tandem mass spectrometry (GC-MS-MS) is described. Several organotin derivatives were synthesized by the reaction of organotin chlorides with Grignard reagents such as methyl-, propyl- and pentylmagnesium halides. After the optimization of the GC-MS-MS conditions, several derivatizations with the Grignard reagents were compared by evaluating the molar responses and volatilities of the derivatives and derivatization yields. As a result, the derivatizing reagent of choice is pentylmagnesium bromide. Calibration curves for the mono-, di- and tributyltins and mono-, di- and triphenyltins with pentylmagnesium bromide were linear in the range of 0.5-100 pg of Sn. The instrumental detection limits of six organotins ranged from 0.20 to 0.35 pg of Sn. The recovery tests from water samples (500 ml) were performed by using sodium diethyldithiocarbamate (DDTC) as a complexing reagent. Except for monophenyltin, the absolute recoveries of organotins from pure water at 200 ng of Sn/l were satisfactory. The recoveries calibrated by surrogate compounds (perdeuterated organotin chlorides) ranged from 71 to 109%. The method detection limits ranged from 0.26 to 0.84 pg of Sn (500-ml sample). This method was applied to the recovery of organotins from river water and seawater. The calibrated recoveries were between 90 and 122%.     

Polycyclic N-heterocyclic compounds. XLI. Synthesis of 4-substituted 6,7-dihydro-5H-pyrimido[5,4-d][1]benzazepines, 1,2,5,6-tetrahydro-4H-imidazo[1′,2′:1,6]pyrimido[5,4-d][1]benzazepines and their related compounds as a series of potential blood platelet aggregation inhibitors

As a series of polyheterocyclic compounds for exploitation as anti-platelet agents, tricyclic heterocyclic compounds, 4-substituted 6,7-dihydro-5H-pyrimido[5,4-d][1]benzazepines 3–6, 9, 12–14 , and 16–26 , having nitrogen, oxygen, or sulfur containing functional groups at the 4-position, were prepared. In addition, tetra-cyclic heterocyclic compounds, 3-methyl-1,2,5,6-tetrahydro-4H-imidazo[1′,2′:1,6]pyrimido[5,4-d][1]benzaze-pinium chloride ( 7 ), 1,2,5,6-tetrahydro-4H-imidazo[1′,2′:1,6]pyrimido[5,4-d][1]benzazepines 10a-e , 2,3,6,7-tetrahydro-1H 5H-pyrimido[1′,2′:1,6]pyrimido[5,4-d][1]benzazepine ( 11 ), and 1,2,5,6-tetrahydro-4H-thiazolo-[3′,2′:1,6]pyrimido[5,4-d][1]benzazepinium chloride ( 15 ) via ring closure of 4-(hydroxyalkylamino)- 6, 9a-e , and 3c , and 4-(2-hydroxyethylthio)-6,7-dihydro-5H-pyrimido[5,4-d][1]benzazepine ( 14 ) with phosphoryl chloride or thionyl chloride, respectively, were also prepared. Their inhibitory activities against collagen-induced aggregation of rabbit blood platelets in vitro were investigated. Among them, compound 5 having a morpholino group at the 4-position on the tricyclic nucleus, which enhanced the activity more than 14-fold as compared with aspirin, was found to have the most satisfactory in inhibitory activity.     

SO+(A2Π-X2Πr) emission produced from a dissociative charge-transfer reaction of He+ with SO2 at thermal energy

The extensive bands observed from the helium afterglow reaction of SO₂ in the 250–540 nm region are assigned to the new SO⁺(A²Π-X²Π_r) system produced from the He⁺/SO₂ dissociative charge-transfer reaction at thermal energy. They had been erroneously interpreted as the SO⁺₂ (C?-X?) system produced from He(2³S)/SO₂ Penning ionization. The spectroscopic constants for the SO⁺A²Π) and SO⁺(X²Π_r) states were determined.     

Regioselective synthesis and biological activity of oxidized chitosan derivatives

Oxidized chitosan derivatives with various degrees of oxidation (DS, 0.1–1.0) were prepared by the treatment of chitosan with CrO₃/aq HClO₄ or by the oxidation of ­3‐O‐ and N‐protected chitosan with 30% aq H₂O₂/Na₂WO₄ followed by 3‐O‐ and N‐deprotection. The oxidized products were then N‐acetylated with Ac₂O in order to improve their water‐solubility. Although the oxidized chitosan derivative of DS 0.28 and the degree of N‐acetylation of chitosan (DA) 38% was insoluble in the pH 3–8 region, that of DS 0.26 and DA 76% was soluble in the neutral pH range. The newly‐prepared acetylated and oxidized chitosan derivatives were found to suppress the chemiluminescence response of inflammatory cells such as canine polymorphonuclear cells (PMNs). Analysis by the surface plasmon resonance method revealed that the bind and release behavior of PMNs to acetylated oxidized chitosan derivatives was similar to that against carboxymethylated chitosan derivatives. The amount of water‐soluble chitosan derivative bound to cytokine IL‐8 was found to be affected by the structural and electronic features of the chitosan substituents in the chitosan chain. Copyright © 2003 John Wiley & Sons, Ltd.     

Characterization of saccharide moiety in the electroplax sodium channel.

Carbohydrate chains on the large peptide of the voltage-sensitive sodium channel from Electrophorus electricus electroplax have been partially characterized by the lectin-blotting technique combined with digestion using three glucosidases: neuraminidase, endo-beta-N-acetylglucosaminidase H, and peptide: N-glycosidase F. The results show that both N-linked oligosaccharides and O-linked (mucin-type) oligosaccharides are present. In N-linked oligosaccharides, the results suggest the presence of complex- and hybrid-type oligosaccharides which contain bisecting N-acetylglucosamine(s), as well as the complex-type oligosaccharides with the alpha-Fuc-GlcNAc-(Asn) residue(s). In O-linked oligosaccharides, they must carry Gal beta1----3GalNAc- moieties which contain NeuNAc residues in the terminal.     

Determination of 4-alkylphenols by novel derivatization and gas chromatography-mass spectrometry

A simple and sensitive method for the determination of alkylphenols in water samples has been developed using gas chromatography-mass spectrometry. Alkylphenols were determined after the extractive derivatization with pentafluoropyridine. The derivatization of alkylphenols efficiently proceeded to give the corresponding 4-tetrafluoropyridyl derivatives under the biphasic reaction system. The derivatization conditions including the phase-transfer catalyst, the amount of pentafluoropyridine, the reaction time, the concentration of NaOH and organic solvent were optimized. On the mass spectra of these derivatives, intense specific ion peaks were observed: m/z 256 for 4-n-alkylphenols and m/z 284 for 4-tert.-alkylphenols. Calibration curves were linear in the range of 20-1000 ng/l (200-10,000 ng/l for nonylphenol), and the detection limits varied between 6.93 and 15.7 ng/l (85.2 ng/l for nonylphenol). The average recoveries of the alkylphenols in a fortified river water sample (100 ng/l except for nonylphenol: 1000 ng/l) ranged from 91.1 to 112%. The relative standard deviations were found to be between 5.6 and 16%. This method was successfully applied to the determination of alkylphenols in river water.     

Anodic behavior of nickel-based alloys in the electrolytic production of NF3

The Ni-based alloys, such as Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si, prepared by hot isostatic pressing (HIP) at 1000 °C under 2 × 10⁸ Pa for 2 h were employed as the anodes for electrolytic production of NF₃. The current efficiencies for NF₃ formation were 42-38, 52-40, 52-47, 63-62, 50 and 41% for Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloys, respectively. The current efficiencies only on Ni-Cu alloys with Cu concentrations lower than 10 mol% were almost the same as those on Ni sheet and HIPed Ni anodes, whereas those on the other alloys used in this study were smaller compared with those on both Ni anodes. On the other hand, the current losses caused by anodic dissolution of Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloy electrodes were 7.95-4.42, 6.40-7.02, 5.60-6.30, 3.34-6.33, 5.10 and 0.18%, respectively. The anode consumptions of Ni-5 mol% Cu and Ni-5 mol% Si alloys were almost the same or smaller compared with those of Ni sheet and HIPed Ni electrodes, though those of other alloys used were large compared with those of both Ni anodes. Consequently, addition of Cu to the nickel matrix is available for a cheaper cost of anode with keeping a same current efficiency as that on the Ni anode and addition of Si to the nickel matrix is effective for decreasing anode consumption largely. A Ni sheet electrode containing a trace of impurities, such as Co, Mn, Ag and Al, is also favorable as the anode for electrolytic production of NF₃.