p-Nitrophenol permeability and temperature characteristics of an acryloyl-L-proline methyl ester-based porous gel membrane

Thermoresponsive porous gel membranes were synthesized by a simultaneously occurring process consisting of radiation-induced polymerization and crosslinking in aqueous solutions at various concentrations of acryloyl-L -proline methyl ester(A-ProOMe) without a crosslinker. Permeation of p-nitrophenol (PNP) through a thermoresponsive porous gel membrane obtained at a monomer concentration of 80% (w/w) drastically reduced around 14°C, the lower critical solution temperature (LCST) of linear poly(A-ProOMe) in water, from 0.60 × 10⁻³ cm/min at 10°C to no permeation at 18°C, accompanied by changes in both size and shape of pores associated with gel shrinkage. Moreover, it was found that porous gel membranes with a porosity of approximately 60% had a greater PNP permeability constant through porous gel membranes with mutually connected pores obtained at a monomer concentration of 50% (w/w) than individually supported pores obtained at a monomer concentration of 70% (w/w). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1495–1500, 1998     

NMR and quantum chemical study on the OH...pi and CH...O interactions between trehalose and unsaturated fatty acids: implication for the mechanism of antioxidant function of trehalose

Trehalose is a disaccharide that attracts much attention as a stress protectant. In this study, we investigated the mechanism of the antioxidant function of trehalose. The spin-lattice relaxation times (T(1)) of (1)H and (13)C NMR spectra were measured to investigate the interaction between trehalose and unsaturated fatty acid (UFA). We selected several kinds of UFA that differ in the number of double bonds and in their configurations (cis or trans). Several other disaccharides (sucrose, maltose, neotrehalose, maltitol, and sorbitol) were also analyzed by NMR. The T(1) values for the (1)H and (13)C signals assigned to the olefin double bonds in UFA decrease with increasing concentration of trehalose and the changes reaches plateaus at integer ratios of trehalose to UFA. The characteristic T(1) change is observed only for the combination of trehalose and UFA with cis double bond(s). On the other hand, from the (13)C-T(1) measurements for trehalose, the T(1) values of the C-3 (C-3') and C-6' (C-6) are found to change remarkably by addition of UFA. (1)H[bond](1)H NOESY measurements provide direct evidence for complexation of trehalose with linoleic acid. These results indicate that one trehalose molecule stoichiometrically interacts with one cis-olefin double bond of UFA. Computer modeling study indicates that trehalose forms a stable complex with an olefin double bond through OH...pi and CH...O types of hydrogen bonding. Furthermore, a significant increase in the activation energy is found for hydrogen abstraction reaction from the methylene group located between the double bonds that are both interacting with the trehalose molecules. Therefore, trehalose has a significant depression effect on the oxidation of UFA through the weak interaction with the double bond(s). This is the first study to elucidate the antioxidant function of trehalose.     

One-pot synthesis of tryptanthrin by the Dakin oxidation of indole-3-carbaldehyde

A one-pot approach to indolo[2,1-b]quinazolines from indole-3-carbaldehydes through the Dakin oxidation was developed. It was shown that the reaction proceeded through the condensation of indole-3-carbaldehydes with isatoic anhydrides, derived in situ from indole-3-carbaldehydes by the Dakin oxidation, and further oxidation/cyclization steps.     

Proton Order–Disorder Phenomena in a Hydrogen‐Bonded Rhodium–η5‐Semiquinone Complex: A Possible Dielectric Response Mechanism

A newly synthesized one‐dimensional (1D) hydrogen‐bonded (H‐bonded) rhodium(II)–η⁵‐semiquinone complex, [Cp*Rh(η⁵‐p‐HSQ‐Me₄)]PF₆ ([ 1 ]PF₆; Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl; HSQ=semiquinone) exhibits a paraelectric–antiferroelectric second‐order phase transition at 237.1 K. Neutron and X‐ray crystal structure analyses reveal that the H‐bonded proton is disordered over two sites in the room‐temperature (RT) phase. The phase transition would arise from this proton disorder together with rotation or libration of the Cp* ring and PF₆^? ion. The relative permittivity ε_b′ along the H‐bonded chains reaches relatively high values (ca., 130) in the RT phase. The temperature dependence of ¹³C CP/MAS NMR spectra demonstrates that the proton is dynamically disordered in the RT phase and that the proton exchange has already occurred in the low‐temperature (LT) phase. Rate constants for the proton exchange are estimated to be 10^?4–10^?6 s in the temperature range of 240–270 K. DFT calculations predict that the protonation/deprotonation of [ 1 ]⁺ leads to interesting hapticity changes of the semiquinone ligand accompanied by reduction/oxidation by the π‐bonded rhodium fragment, producing the stable η⁶‐hydroquinone complex, [Cp*Rh³⁺(η⁶‐p‐H₂Q‐Me₄)]²⁺ ([ 2 ]²⁺), and η⁴‐benzoquinone complex, [Cp*Rh⁺(η⁴‐p‐BQ‐Me₄)] ([ 3 ]), respectively. Possible mechanisms leading to the dielectric response are discussed on the basis of the migration of the protonic solitons comprising of [ 2 ]²⁺ and [ 3 ], which would be generated in the H‐bonded chain.     

Patterning reactive microdomains inside polydimethylsiloxane microchannels by trapping and melting functional polymer particles

This paper describes a facile technique to pattern reactive microdomains inside polydimethylsiloxane microchannels by utilizing polymer particles as the carrier of functional groups. The air/liquid interface formed in microchannels equipped with microwells exerts lateral force on the particles, trapping particles only inside the wells. We then fix the polymer matrix on the wells by melting the trapped particles to form reactive domains with flexible shapes and high resolution. We employed monodisperse poly(styrene-co-glycidyl methacrylate) microparticles having an epoxy group and patterned various types of microdomains with a resolution of several micrometers. Several tests confirmed the presence of the epoxy group and the flatness of the patterned domain. The presented scheme provides a new way of preparing highly functional microsystems by using simple operations and would be useful for various applications, including local patterning of graft polymers and the site-specific cultivation of cells in a confined space.     

Observation of intramolecular singlet and triplet excimers of tethered naphthalene moieties under the geometric constraints imposed by the host framework of zeolites

This paper describes the emission spectroscopic investigation of singlet and triplet excimers of tethered bisnaphthalene species at room temperature. 1,1'-Dinaphthylethane (DNE) and 1,1'-dinaphthylpropane (DNP) were incorporated into a 3-D network of a 1.3 nm diameter pseudo-spherical supercage of zeolites Y (with an entry aperture of 0.74 nm), and a 1-D channel of zeolite L with a 0.71 nm aperture. In the straight channel of zeolite L, DNP adopts a parallel-sandwich conformation as suggested by the observation of entirely excimeric fluorescence, while DNE can only enter the channel in an open form. As a result, incorporation of DNP into zeolite L exchanged with Tl(+) ions, which induce enhanced intersystem-crossing, allowed the observation of a broad and featureless phosphorescence spectrum that is ascribable to the triplet excimer of DNP. In contrast, an entirely monomeric phosphorescence is observed for DNE. Furthermore, we observed a monomeric phosphorescence spectrum for DNP in Tl(+)-exchanged zeolite Y, in which DNP was shown to assume its open conformation. Thus the parallel-sandwich structure is responsible for the triplet excimer of the bisnaphthalene species as well as for the singlet counterpart. The parallel-sandwich conformation of the triplet excimer of DNP immobilized by the host framework is significantly different from the previously proposed L-shaped configuration in solution. However, it is very similar to that of the triplet excimer of triple-tethered carbazolophane, as revealed quite recently by Ohkita's group (J. Phys. Chem. B, 2007, 111, 10905). Thus the present study helps tackle the long-term issue of triplet excimer through the use of zeolites.     

Energy-saving drying technology for porous media using liquefied DME gas

Process design and energy requirement for a practical plant are investigated for an energy-saving drying (dewatering) process invented by the authors in 2002 for high-moisture porous materials. The basic concept of the process involves the extraction of water from a high-moisture porous material by bringing it in physical contact with liquefied dimethyl ether (DME) at room temperature. Water content of DME asymptotically increases to the saturation value and the high-moisture porous material is dried almost perfectly. DME from the DME-water mixture is vaporized by decompression. DME and water are separated by flash distillation. DME vapor is compressed and cooled in a heat exchanger, and the latent heat of condensation is reused to vaporize the DME in the heat exchanger. Multistage compression and multistage flash distillation are employed. After compression, the temperature of DME is less than 50?°C. Because specific heat ratio of DME is only 1.11, the energy consumption of the compressor is reduced. Considering the adiabatic efficiency of the compressor and the net thermal efficiency, the total energy for dewatering is about 1100 kJ per 1-kg-water-content of the material being dewatered This process has significant potential and is compact than the existing dewatering processes.     

Copper–Oxygen Dynamics in the Tyrosinase Mechanism

The dinuclear copper enzyme, tyrosinase, activates O₂ to form a (μ-η²:η²-peroxido)dicopper(II) species, which hydroxylates phenols to catechols. However, the exact mechanism of phenolase reaction in the catalytic site of tyrosinase is still under debate. We herein report the near atomic resolution X-ray crystal structures of the active tyrosinases with substrate l -tyrosine. At their catalytic sites, CuA moved toward l -tyrosine (CuA1 → CuA2), whose phenol oxygen directly coordinates to CuA2, involving the movement of CuB (CuB1 → CuB2). The crystal structures and spectroscopic analyses of the dioxygen-bound tyrosinases demonstrated that the peroxide ligand rotated, spontaneously weakening its O−O bond. Thus, the copper migration induced by the substrate-binding is accompanied by rearrangement of the bound peroxide species so as to provide one of the peroxide oxygen atoms with access to the phenol substrate's ϵ carbon atom.