关于群布尔矩阵的收敛和周期

在文[1]和[2]中,各自得到了如下结果：一个循环布尔矩阵A是本原的当且仅当gcd（i2-i1,…,i1-i1,n）＝1,其中A＝Pi1十Pi2十…＋Pi1,0≤i1＜i2＜…＜i1≤n-1,P是对应于n阶循环置换（123…n）的置换矩阵．在本文中,先把此结果推广到群矩阵（一种循环矩阵的推广）．其次,讨论群布尔矩阵的周期．给出了计算周期的算法,最后,探讨循环布尔矩阵A的使Am p＝Am的最小正整数m.     

Multiple headspace single-drop micro-extraction for quantitative determination of lactide in thermally-oxidized polylactide

Single-drop micro-extraction (SDME), an emerging micro-extraction technique, was combined with multiple headspace (MHS) extraction to allow quantitative determination of lactide in thermally-oxidized polylactide. Different solvents, drop sizes and extraction times were tested to obtain best extraction efficiency and the method was further developed to obtain a linear regression plot for the multiple extractions. The combination of SDME and MHS extraction offered several advantages over traditional liquid-solid and headspace extraction techniques. No concentration step was needed and loss of volatiles was prevented as the ageing and extraction were performed in a closed system. Matrix effects, that disturb the quantitation of analytes in solid samples, were removed by the multiple headspace extraction.     

Comprehensive two-dimensional gas chromatography in the analysis of dietary fatty acids

Comprehensive two-dimensional gas chromatography utilising a semi-rotating cryogenic modulator was applied to the analysis of dietary milk derived fatty acids. Four column combinations were tested: two polar-nonpolar and two different nonpolarpolar column combinations. Best results were obtained with a nonpolar-polar column set, with narrow-bore (50 microm ID) Carbowax column as the second column. The GC x GC method clearly improved the separation efficiency of the fatty acids in comparison with one-dimensional GC analysis and proved to be suitable for the quantification of the analytes. The relative standard deviations (RSD) of the retention times in the first and second dimensions were on average 0.06% and 4.9%, respectively. The relative RSD for peak volumes was on average 2.9%.     

Liquid chromatography tandem mass spectrometry determination of total budesonide levels in dog plasma after inhalation exposure

A sensitive and selective method to quantify budesonide in dog plasma samples was developed and fully validated. Liquid–liquid extraction was followed by solid-phase extraction and liquid chromatography–tandem mass spectrometry with electrospray ionization. After reconstitution of the analytes in the mobile phase, samples were analysed by reversed-phase liquid chromatography with isocratic elution. d8-Budesonide was used as an internal standard, and characteristic transitions of d8-budesonide and budesonide were used for quantification. The method was validated with respect to selectivity, specificity, linearity, recovery, repeatability, reproducibility and limits of detection and quantification. The validated method was successfully applied to monitor the plasma levels of budesonide in dogs exposed to clinical doses of inhaled and intravenous drug.     

仲钨酸钠的热分解研究

制备了仲钨酸钠Na（10）H2W（12）O（42）·27H2O，用X射线衍射、Raman光谱及化学分析进行了表征．热分析的研究表明：该化合物热分解过程包括六个步骤．其中前四步为脱水步骤，温度分别为331，353，403及588K左右，而失水数分别为10H2O，9H2O，5H2O及4H2O；第五步可能为中间产物的相转变，温度为691K左右，第六步生成Na2W2O7和Na2W4O（13）的混合物，温度为733K左右．前五步中每一步的产物在标题化合物馆和溶液的气相中平衡处理之后，又都能得到标题化合物．     

Screening of Hydrogels for Human Pluripotent Stem Cell–Derived Neural Cells: Hyaluronan‐Polyvinyl Alcohol‐Collagen‐Based Interpenetrating Polymer Network Provides an Improved Hydrogel Scaffold

There is a clear need for novel in vitro models, especially for neuronal applications. Development of in vitro models is a multiparameter task consisting of cell‐, biomaterial‐, and environment‐related parameters. Here, three different human origin neuronal cell sources are studied and cultured in various hydrogel 3D scaffolds. For the efficient evaluation of complex results, an indexing method for data is developed and used in principal component analysis (PCA). It is found that no single hydrogel is superior to other hydrogels, and collagen I (Col1) and hyaluronan–poly(vinyl alcohol) (HA1‐PVA) gels are combined into an interpenetrating network (IPN) hydrogel. The IPN gel combines cell supportiveness of the collagen gel and stability of the HA1‐PVA gel. Moreover, cell adhesion is studied in particular and it is found that adhesion of neurons differs from that observed for fibroblasts. In conclusion, the HA1‐PVA‐col1 hydrogel is a suitable scaffold for neuronal cells and supports adhesion formation in 3D.     

The effect of MWCNTs on molar mass in in situ polymerization of styrene and methyl methacrylate

Two different in situ-polymerization techniques were studied, emulsion polymerization and combined emulsion/suspension polymerization, with styrene and methyl methacrylate in the presence of different multiwalled carbon nanotubes (MWCNTs). Molar masses and molar mass distributions were determined by size exclusion chromatography, and particle size of the emulsions by dynamic light scattering and rotation rheometry. The compatibility of the MWCNTs and monomer affected polymerization and therefore the molar masses. The MWCNTs stabilized the emulsions, and molar mass distributions narrowed with higher amounts of MWCNTs. In emulsion polymerization of styrene, MWCNTs increased the molar mass. The increase of molar mass was based on the compatible molecular structures of MWCNTs and styrene, so that individual nanotubes were covered by monomer clouds when initiator arrived. In combined emulsion/suspension polymerization of styrene, MWCNTs reacted with the initiator and there was less initiator to polymerize the monomer. There is probably a critical surface area of MWCNTs, for which more initiator is consumed in the reaction with MWCNTs than in polymerization of the monomer. In emulsion polymerization of MMA, monomer clouds around MWCNTs do not form due to incompatible molecular structures, and nanotubes do not enhance polymerization of MMA. In combined polymerization, the initiator is reacting with the nanotubes and the tube is acting as a carrier for initiator, and molar masses are higher.     

Aryl-diamide bridged binuclear ruthenium (II) tris(bipyridine) complexes: Synthesis, photophysical, electrochemical and electrochemiluminescence properties

Several new symmetrical aromatic hydrocarbon bridged bipyridine ligands and their binuclear Ru (II) complexes have been designed, synthesized and characterized on the basis of ¹H NMR, MS and HRMS. Their absorption and emission properties, electrochemical behaviors and electrochemical luminescence were investigated. All ruthenium complexes show characteristic MLCT absorption and similar redox potential. Among the three complexes reported, 4c has the best electrochemical luminescence property.     

Facile synthesis of polyoxometalate-thionine composite via direct precipitation method and its photocatalytic activity for degradation of rhodamine B under visible light

(TH)(3)PW(12) (TH=thionine, PW(12)=PW(12)O(40)(3-)) composite was prepared by direct precipitation of TH and PW(12). The (TH)(3)PW(12) was characterized via UV-vis spectrum, FT-IR, SEM, and BET surface area. PW(12) was intact during the precipitation process. The composite has a bar-like shape and relatively large surface area (Langmuir surface of (TH)(3)PW(12) was 31.59 m(2)g(-1), BET surface was 20.26 m(2)g(-1)). Using the material as the photocatalyst, rhodamine B (RhB) was efficiently bleached and mineralized under visible light irradiation (λ>420 nm). The kinetics of the photodecomposition follow the first-order reaction. The (TH)(3)PW(12) catalyst can be easily separated from the reaction system and has good stability for reuse.     

Simple calibration procedure for comprehensive two-dimensional gas chromatography

Mass transfer from the first-dimension to the second-dimension column in comprehensive two-dimensional gas chromatography (GC x GC) is normally quantitative, which means that the peak areas produced by GC x GC are equal to those obtained in one-dimensional gas chromatography (GC). In view of this relationship, it was investigated whether normal GC calibration could be used to quantify compounds analysed by GC x GC. Quantification of polycyclic aromatic hydrocarbons (PAHs) in sediment was used as a test case. It was concluded that more laborious and time-consuming GC x GC area calibration can be replaced by GC area calibration if separation quality and quantity prerequisites are met.