Enhancing the enantioselectivity of lipase in transesterification by substrate matching: an enzyme memory based approach

The substrate matching strategy is described as a new approach for effectively enhancing the lipase enantioselectivity in organic solvent. In the lipase-catalyzed transesterifications of 3a-c, higher enantioselectivities have been achieved using 1a-c, respectively, as the structurally matched acyl donors.     

Kinetic simulation of living carbocationic polymerizations. II. Simulation of living isobutylene polymerization using a mechanistic model

This paper discusses the kinetic simulation of TiCl₄--coinitiated living carbocationic isobutylene (IB) polymerizations governed by dormant-active equilibria, using a mechanistic model. Two kinetic models were constructed from the same underlying mechanism: one using a commercial simulation software package (Predici^®), and the other using the method of moments. Parameter estimation from experimental batch reactor data with Predici yielded a rate constant of propagation k_p = 4.64 × 10⁸ ± 2.75 × 10⁸ L/mol s, with no constraints imposed. This agrees with k_p data measured with diffusion clock and competition methods, but disagrees with kinetically obtained k_p values. Estimation of rate constants with Predici^® and the GREG parameter estimation software packages revealed that it was difficult to estimate the complete set of kinetic parameters, due to correlated effects of the parameters on model predictions. Estimability analysis confirmed that some of the strongly correlating parameters could not be estimated simultaneously using the available experimental data. Using k_p = 6 × 10⁸ ± 2.75  × 10⁸ L/mol s measured by Mayr, and using starting estimates of other rate constants defined by experimentally observed correlations, yielded the set of rate constants required for the simulations. Both kinetic models yielded good agreement with experimental data, with the exception of M_w values that slightly diverged from the theoretically predicted ‘M_w−M_n = constant’ relationship. This may indicate the occurrence of a minor side reaction. However, the k_p/k₋₁ = 17.5 L/mol average run length calculated from measured and simulated MWD data agrees well with earlier literature values.     

Surface Modification of Colloidal Silica by Sulfonation Route for Super-Hydrophilicity

Colloidal silica was chemically modified by a two-step method including an olefin sulfonation route as a preliminary study for super-hydrophilic applications. The hydrophobic vinyl groups were initially bonded chemically to the hydroxylated silica surface using the trichlorosilane coupling agents. The vinyl-terminated silica was then sulfonated by addition reaction with chlorosulfonic acid. The modified silica was investigated using DRIFT, TGA, element analysis, solid-state ²⁹Si- and ¹³C CP-MAS NMR. The vinyl-terminated specimen showed a characteristic IR absorption band at 1600 cm^–1 and a weight loss of approximately 3% starting at 350°C while the ²⁹Si NMR peaks at 70.9 and 79.8 ppm and ¹³C NMR at 136 ppm and 129.8 ppm were assigned to a vinyl group bonded to silica. Elemental analysis of the sulfonated silica indicated the presence of sulfur, carbon and hydrogen. Thermal decomposition in range 150–600°C was due to the presence of sulfonated organics and unreacted vinyl groups while the new signals on ¹³C NMR, which were in the range 70–15 ppm, were assigned to sulfonated carbons.     

Investigation of the Curing Mechanism in the GPTS/APTS Binder System

The acid catalyzed sol-gel reaction in the mixed binder system, 3-glycidoxypropyltrimethoxysilane (GPTS)/3-aminopropyltriethoxysilane (APTS) was investigated and one step and two step synthesis process were compared. Hydrolysis product was observed using the ¹H, ¹³C NMR and Raman spectra. Especially, based on the Raman spectra, epoxy ring opening was observed, varying the ratio of GPTS to APTS. The two step process made clear sol, while the one step process resulted in a milky suspension. According to the Raman spectra, the epoxy ring opening reaction kinetics proceeded slower in the two step process than one step process. Throughout the two step process, it was possible to apply the binder for the coating of substrate.     

The polyphenolic profiles and antioxidant effects of Agastache rugosa Kuntze (Banga) flower,leaf, stem and root

Agastache rugosa Kuntze (Korean mint) is used as a spice and in folk medicine in East Asia. The present study identified a total of 18 polyphenols from the flower, leaf, stem and roots of this plant using high‐performance liquid chromatography–tandem mass spectrometry. Fourteen of these compounds had not previously been identified in these plant tissues. Each polyphenol was validated in comparison with external calibration curves constructed using structurally related compounds, with determination coefficients >0.9993. The limits of detection and quantification were 0.092–0.650 and 0.307–2.167 mg/L, respectively. Recoveries of 61.92–116.44% were observed at two spiking levels, with 0.91–11% precision, expressed as relative standard deviation (except anthraquinone spiked at 10 mg/L). Hydroxycinnamic acid was the most abundant compound in the root, while the flowers showed the highest total flavonoid level. Antioxidant activities, determined in terms of reducing power, Fe²⁺ chelating activity and the radical scavenging activities using α,α‐diphenyl‐β‐picrylhydrazyl and 2‐2?‐azino‐bis‐3‐ethylbenzothiazoline‐6‐sulfonic acid, increased in a concentration‐dependent manner; the highest activity was identified in the stems, followed by leaves > flowers > roots. These findings indicate that A. rugosa is a good source of bioactive compounds and can be used as a functional food. Copyright © 2015 John Wiley & Sons, Ltd.     

Fouling Mitigation in a Heat Exchanger: High Cycles of Concentration for a Cooling-Tower Application

The purpose of the present study is to investigate the effect of a physical water treatment (PWT) technology on fouling mitigation in a simulated cooling tower operating at high cycles of concentration. Hard water was produced by evaporating pure water in a circulating open cooling tower, where dissolved calcium carbonate ions became concentrated with time. Heat transfer tests were conducted in a rectangular channel by varying the cycle of concentration (COC) from 5 to 10, and fouling resistances were measured over 270 hrs for each case with and without the PWT treatment. Another test was conducted with no blowdown case with and without the PWT treatment. The fouling resistance at 5 cycles with the PWT treatment was about 70% less than that in the case without the PWT treatment at the end of 270-hr tests. Even at 10 cycles, the PWT treatment reduced the fouling resistance by 60% from the value for the no treatment case. Thus, one can conclude that the PWT technology can help circulating cooling-tower water at relatively high COC for significant freshwater conservation, while keeping fouling resistances below industry standards.     

Pretilt angle generation by UV exposure during imidization of polyimide

We investigated pretilt angle generation and liquid crystal (LC) alignment by ultraviolet exposure during the imidization of polyimide (PI). The generated pretilt angle of a nematic (N) LC using an in situ photo-alignment method is smaller than that using a conventional photo-alignment method on a surface of PI having side chains. The NLC pretilt angles using an in situ photo-alignment method injected at isotropic phase increased with annealing were observed.