The optical properties and energy transition process in nanocomposite of polyvinyl-pyrrolidone polymer and Mn-doped ZnS

This study has been carried out on the optical properties of polyvinyl-pyrrolidone (PVP), the energy transition process in nanocomposite of PVP capped ZnS:Mn nanocrystalline and the influence of the PVP concentration on the optical properties of the PVP capped ZnS:Mn nanocrystalline thin films synthesized by the wet chemical method. The microstructures of the samples were investigated by X-ray diffraction, the atomic absorption spectroscopy, and transmission electron microscopy. The results showed that the prepared samples belonged to the sphalerite structure with the average particle size of about 2–3 nm. The optical properties of samples are studied by measuring absorption, photoluminescence (PL) spectra and time-resolved PL spectra in the wavelength range from 200 to 700 nm at 300 K. From data of the absorption spectra, the absorption edge of PVP polymer was found about of 230 nm. The absorption edge of PVP capped ZnS:Mn nanoparticles shifted from 322 to 305 nm when the PVP concentration increases. The luminescence spectra of PVP showed a blue emission with peak maximum at 394 nm. The luminescence spectra of ZnS:Mn–PVP exhibits a blue emission with peak maximum at 437 nm and an orange–yellow emission of ion Mn²⁺ with peak maximum at 600 nm. While the PVP coating did not affect the microstructure of ZnS:Mn nanomaterial, the PL spectra of the PVP capped ZnS:Mn samples were found to be affected strongly by the PVP concentration.     

Extremely low vertical-emittance beam in the accelerator test facility at KEK

Electron beams with the lowest, normalized transverse emittance recorded so far were produced and confirmed in single-bunch-mode operation of the Accelerator Test Facility at KEK. We established a tuning method of the damping ring which achieves a small vertical dispersion and small x-y orbit coupling. The vertical emittance was less than 1% of the horizontal emittance. At the zero-intensity limit, the vertical normalized emittance was less than 2.8 x 10(-8) rad m at beam energy 1.3 GeV. At high intensity, strong effects of intrabeam scattering were observed, which had been expected in view of the extremely high particle density due to the small transverse emittance.     

Synthesis of Fluorinated Graphene Oxide and its Amphiphobic Properties

The richly functionalized basal plane bonded to polar organic moieties makes graphene oxide (GO) innately hydrophilic. Here, a methodology to synthesize fluorinated graphene oxide by oxidizing the basal plane of fluorinated graphite, allowing for tunable hydrophobicity of GO, is reported. Fluorine exists as tertiary alkyl fluorides covalently bonded to graphitic carbons, and using magic‐angle spinning (MAS) ¹³C NMR as a primary tool chemical structures for the two types of synthesized fluorinated graphene oxides (FGOs) with significantly different fluorine contents are proposed. The low surface energy of the C–F bond drastically affects GO's wetting behavior, leading to amphiphobicity in its highly fluorinated form. Ease of solution processing enables the fabrication of inks that are spray‐painted on various porous/non‐porous substrates. These coatings maintain amphiphobicity for solvents with surface tensions down to 59 dyn/cm, thus bypassing existing lithographic means to create similar surfaces. The approach towards fluorinating GO and fabricating graphene‐based surfaces with tunable wettability opens the path towards unique, accessible, carbon‐based amphiphobic coatings.     

Identification of a TGBA liquid crystal phase via its defects

We have shown that cholesteryl nonanoate, a thermotropic compound which is well known to exhibit pretransitional effects at the smectic A (SmA) cholesteric (N*) transition (W.L. McMillan, Phys. Rev. A 4, 1238 (1971); 6, 936 (1972)), has in fact a TGBA phase in between. Our arguments rely on the observation of new TGBA defects, either in Robinson spherulites cooled from the N* phase or in free-standing films. The same new defects can be obtained in a well-documented TGBA phase of a tolane compound. We analyze qualitatively the TGBA defects in both geometries, in particular their relation to the disclination radius of the N* Robinson spherulites. Received 12 February 2001     

Spin gapless semiconductor like Ti2MnAl film as a new candidate for spintronics application

A novel Heusler ferrimagnet Ti₂MnAl film has been grown on Si(001) substrate using magnetron sputtering. Characteristics of its magnetic and transport properties reveal the spin‐gapless‐semiconductor (SGS) nature of the stoichiometric Ti₂MnAl, in agreement with theoretical prediction. The as‐grown SGS‐like Ti₂MnAl film demonstrated high Curie temperature, nearly compensated ferrimagnetic properties with small coercivity and low magnetization. It also showed semiconductor‐like behavior at room temperature allowing good compatibility with commercial Si‐based semiconductor. In this regards, Ti₂MnAl film is a potential candidate material for spintronics application, especially for the minimization of energy consumption of device. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Spontaneous decay of an excited atom placed near a rectangular plate

Using the Born expansion of the Green tensor, we consider the spontaneous decay rate of an excited atom placed in the vicinity of a rectangular plate. We discuss the limitations of the commonly used simplifying assumption that the plate extends to infinity in the lateral directions and examine the effects of the atomic dipole moment orientation, atomic position, and plate boundary and thickness on the atomic decay rate. In particular, it is shown that due to the plate finite size, the spontaneous decay may be inhibited even when the atom is situated very close to the surface, and that in the boundary region, the spontaneous decay rate can be strongly modified.     

Synthesis and Raman spectroscopic characterisation of hydrotalcite with CO32− and (MoO4)2− anions in the interlayer

Raman spectroscopy has been used to characterise synthetic mixed carbonate and molybdate hydrotalcites of formula Mg₆Al₂(OH)₁₆((CO₃)²⁻,(MoO₄)²⁻)·4H₂O. The spectra have been used to assess the molecular assembly of the cations and anions in the hydrotalcite structure. The spectra may be conveniently subdivided into spectral features on the basis of the carbonate anion, the molybdate anion, the hydroxyl units and water units. Bands are assigned to the hydroxyl stretching vibrations of water. Three types of carbonate anions are identified: (1) carbonate hydrogen‐bonded to water in the interlayer, (2) carbonate hydrogen‐bonded to the hydrotalcite hydroxyl surface, (3) free carbonate anions. It is proposed that the water is highly structured in the hydrotalcite, as it is hydrogen bonded to both the carbonate and the hydroxyl surface. The spectra have been used to assess the contamination of carbonate in an open reaction vessel in the synthesis of a molybdate hydrotalcite of formula Mg₆Al₂(OH)₁₆((CO₃)²⁻, (MoO₄)²⁻)·4H₂O. Bands are assigned to carbonate and molybdate anions in the Raman spectra. Importantly, the synthesis of hydrotalcites from solutions containing molybdate provides a mechanism for the removal of this oxy‐anion. Copyright © 2007 John Wiley & Sons, Ltd.     

A quasi double-grating grazing incidence pulsed dye laser

Continuous scanning of a 1 GHz pulsed laser line using only one 5-cm grating as an intracavity selective element is obtained from a pulsed dye laser pumped by a Nd: YAG (8 ns-532 nm) laser. Such a single-grating dye laser operates in the same way as a real double-grating grazing incidence laser and provides an appreciable improvement of the resolution (enhancement factor 2), compared with previous grazing incidence ones. The superiority of this laser cavity has been proved for single-longitudinal-mode operation.Laboratoire associé à l'Université de Paris-Sud     

220 μJ monolithic single-frequency Q-switched fiber laser at 2 μm by using highly Tm-doped germanate fibers

We report a unique all fiber-based single-frequency Q-switched laser in a monolithic master oscillator power amplifier configuration at ~1920 nm by using highly Tm-doped germanate fibers for the first time. The actively Q-switched fiber laser seed was achieved by using a piezo to press the fiber in the fiber Bragg grating cavity and modulate the fiber birefringence, enabling Q-switching with pulse width and repetition rate tunability. A single-mode polarization maintaining large core 25 μm highly Tm-doped germanate fiber was used in the power amplifier stage. For 80 ns pulses with 20 kHz repetition rate, we achieved 220 μJ pulse energy, which corresponds to a peak power of 2.75 kW with transform-limited linewidth.     

Field-temperature phase diagrams in chiral tilted smectics,evidencing ferroelectric and ferrielectric phases

Usual ferroelectric compounds undergo a paraelectric-to-ferroelectric phase transition when the susceptibility of the electric polarization density changes its sign. The temperature is the only thermodynamic field that governs the phase transition. Chiral tilted smectics may also present an improper ferroelectricity when there is a tilt angle between the average long axis direction and the layer normal. The tilt angle is the order parameter of the phase transition which is governed by the temperature. Although the electric susceptibility remains positive, a polarization proportional to the tilt appears due to their linear coupling allowed by the chiral symmetry. Further complications come in when the chirality increases, as new phases are encountered with the same tilt inside the layers but a distribution of the azimuthal direction which is periodic with a unit cell of two (SmC(A)*, three (SmC(Fi1)*, four (SmC(Fi2)* or more (SmC(alpha)* layers. In most of these phases, the layer normal is a symmetry axis so there is no macroscopic polarization except for the SmC(Fi1)* in which the average long axis is tilted so the phase is ferrielectric. By studying a particular compound with only a SmC(Fi2)* and a SmC(alpha)* phase, we show that we recover the uniformly tilted ferroelectric SmC* when applying an electric field. We are thus led to build field-temperature phase diagrams for this class of compounds by combining different experimental techniques described here.