RESEARCH ON CATALYSTS OF ANTI-CARBON DEPOSITION FOR CH_4 REFORMING WITH CO_2

IntroductionMethaneandcarbondioxidearetWomaincompositionsforthegreenhouseeffectandtheworldglobewanningll].ItisbeneficialtoourlivingenviroIUnenttocontrolthereleaseofthesetwogases.Theconversionofmethanetothecommonfeedstocksynthesisgas(carbonmonoxideandhydro…     

合成2—芳氧基—5—氟—3H—4—嘧啶酮的新方法

由２－氰－５－氟－３Ｈ－４－嘧啶酮和取代苯酚钠在常压下反应，合成了７个未见文献报道的２－芳氧基－５－氟－３Ｈ－４－嘧啶酮化合物，产率７０￣８７％，结构经ＩＲ、＾１Ｈ ＮＭＲ和ＭＳ证实。     

钪—镧—对氟偶氮氯膦体系共显色效应的研究及应用

本文研究了钪－镧－对氟偶氮氯膦体系共显色效应的光度特性及测定钪的最佳条件，建立了光度法测定痕量钪的新方法。该法的表观摩尔吸光系数为８．５７×１０＾４Ｌ·ｍｏｌ＾－１·ｃｍ＾－１，Ｓｃ（Ⅲ）浓度在０．０－５．０μｇ／２５ｍｌ范围符合比尔定律。将本法用于镁基，铁基合成试样中痕量钪的测定，结果满意。     

我国化学科普的现状与创新发展对策

Chemistry is a central science. However, the public's recognition of chemistry needs to be promoted, and the prejudice needs to be reduced. Chemical science popularization is a long-term, complex and arduous social education project, which is of great significance to promote social harmony and improve people's quality of life. This paper summarizes the current status of chemical science popularization in China, and puts forward the innovative development countermeasures which focus on improving public participation, training popular science talents, carrying out popular science popularization education at different levels, creating high-quality science popularization works and opening up new positions and approaches of chemical science popularization. This paper has the reference value for the science popularization colleagues.     

耐尔蓝-铌钼杂多酸-聚乙烯醇-124体系测定铌

在聚乙烯醇-124存在下,耐尔蓝与铌钼杂多酸形成离子缔合物的适宜条件为:在0.025～0.10mol/L硫酸溶液中形成铌钼杂多酸;在1.1～1.8mol/L硫酸溶液中耐尔蓝与铌钼杂多酸形成离子缔合物。缔合物的组成比为NB:NbMo=3:1,λ_(maX)在615nm处,摩尔吸光系数ε为2.46×10~6L.mol~(-1).cm~(-1),符合比耳定律范围0～1.2μg Nb/25ml,至少稳定5h。考察了43种共存离子的影响,绝大多数元素不干扰测定。方法选择性好,灵敏度高,已用于合金钢和岩矿中铌的测定,结果满意。     

The effect of additives on the water solubilization capacity and conductivity in n-pentanol microemulsions

The influence of additives such as sodium salicylate and sodium chloride on the water solubilization capacity of AOT in n-pentanol solutions has been investigated. The water solubilization capacity is enhanced by sodium salicylate and decreased by sodium chloride. The percolation behavior of the water/AOT/n-pentanol system is studied by modifying the water concentration and temperature. No percolation threshold induced by water or temperature is detected either in the absence or in the presence of additives. The values of ln sigma have a linear correlation with temperature in the range of 5-40 degrees C. The activation energy is also estimated and discussed.     

A highly sensitive fluorimetric method for the determination of fluoride in biological material with Al3+-calcein complex

A highly sensitive fluorimetric method for the determination of fluoride was established. The method was based on quenching of the fluorescence of the Al3+-calcein complex in CCl3COOH-CH3COOK buffer solution by fluoride. The fluorescence emission was measured at lambdaex/lambdaem 480/503 nm, and the experimental variables and interference in this determination were studied. The linear calibration range was 0.8 ng/mL to 150 ng/mL and the detection limit was 0.2 ng/mL. The method was applied to determine fluoride in biological materials. The recovery was in the range of 96.3% to 104.7% and the relative standard deviation was 4.6%. The results obtained from the certified reference material by the present method agreed with the certified values.     

The high-sensitivity determination of protein concentrations by the enhancement of Rayleigh light scattering of Arsenazo-DBN

A new Rayleigh light scattering (RLS) assay of protein is presented in this paper. At the optimum pH 4.10, the weak RLS of Arsenazo-DBN can be greatly enhanced by the addition of proteins due to the interaction between protein and Arsenazo-DBN. Based on this, the reactions of Arsenazo-DBN and proteins, including bovine serum albumin, human serum album, gamma-globulin, egg albumin, lysozyme and trypsin, were studied. A new quantitative determination method for proteins has been developed. The linear range for human serum albumin, for example, is 0.085-34.62 micrograms mL-1 with a detection limit of 44.8 ng mL-1. Besides high sensitivity, the method is characterized by good reproducibility, rapidity of reaction, good stability, and few interfering substances. The determination of the proteins in human serum and urine samples by this method give results very close to those obtained using Coomassie Brilliant Blue G-250 colorimetry, with relative standard deviations of 0.7-2.5%.     

Why is the partial molar volume of CO2 so small when dissolved in a room temperature ionic liquid? Structure and dynamics of CO2 dissolved in [Bmim+] [PF6(-)

When supercritical CO2 is dissolved in an ionic liquid, its partial molar volume is much smaller than that observed in most other solvents. In this article we explore in atomistic detail and explain in an intuitive way the peculiar volumetric behavior experimentally observed when supercritical CO2 is dissolved in 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim+] [PF6(-)]). We also provide physical insight into the structure and dynamics occurring across the boundary of the CO2 ionic liquid interface. We find that the liquid structure of [Bmim+] [PF6(-)] in the presence of CO2 is nearly identical to that in the neat ionic liquid (IL) even at fairly large mole fractions of CO2. Our simulations indicate, in agreement with experiments, that partial miscibilities of one fluid into the other are very unsymmetrical, CO2 being highly soluble in the ionic liquid phase while the ionic liquid is highly insoluble in the CO2 phase. We interpret our results in terms of the size and shape of spontaneously forming cavities in the ionic liquid phase, and we propose that CO2 occupies extremely well-defined locations in the IL. Even though our accurate prediction of cavity sizes in the neat IL indicates that these cavities are small compared with the van der Waals radius of a single carbon or oxygen atom, CO2 appears to occupy a space that was for the most part a priori "empty".     

A comparative study on photo-induced electron transfer from fluorescein to anthraquinone and injection into colloidal TiO2

A dyad-anthraquinone-methyl ester of fluorescein-and its model compound-butyl ester-were synthesized. The effects of photo-induced electron transfer from fluorescein to an organic anthraquinone acceptor and injection into inorganic colloidal TiO(2) were studied respectively. It is found that the photo-induced electron transferring to an organic acceptor is much faster than injecting into inorganic colloidal particles when fluorescein was excited by visible light. While inorganic colloidal TiO(2) was excited by UV, the electron of fluorescein will inject into TiO(2).