Raman spectroscopic study of ceramic Sr2Bi4Ti5O18

Raman spectra of ceramic Sr2Bi4Ti5O18 （SBTi5） are reported to consist of four different Raman bands. Temperature-dependent spectra reveal the relationship between the lattice vibration and the material＇s structure. There appears a relatively large change in structure of the material at about 273K, The anharmonic potential of the material has a great influence on its phonon mode full width at half maximum （FWHM）, which can be expressed by a function of temperature. Theoretical fittings of the FWHMs for the two modes at around 312 cm^-1 and 464cm^-1 indicate that the latter phonon mode is more anharmonic than the former one.     

计算全息图产生的锥面波在激光准直中的应用

本文提出了用计算全息图产生锥面波的方法.将全息图置于激光光路中,它的衍射图样中心在空间形成了一条准直线.文中对锥面波的传播、准直精度及准直距离作了理论分析,给出了实验结果.     

拟南芥胚的不同区域对MeV离子辐照的响应

利用不同能量的质子在大气环境中辐照拟南芥的含水种子，能量从1.1MeV到6.5MeV.根据模拟计算结果，相应能量的离子对种子的损伤区域分别为胚的浅层、胚的一半和整个胚.本实验中，具有较高能量的质子可以完全均匀地作用于拟南芥生长、发育及遗传密切相关的胚茎端分生组织，而能量较低的质子则不能直接作用于茎端分生组织.实验所用质子注量范围为4×10⁹ions/cm²—1×10¹⁴ions/cm².实验结果显示，虽然拟南芥种子的发芽率和幼苗存活率随离子注量增加都呈现下降的趋势，但对应于不同的胚损伤区域，即在不同的入射质子能量条件下，注量曲线具有各自的特征.实验结果显示，拟南芥种子中除了胚茎端分生组织作为对离子辐照敏感的辐射主靶外，茎端分生组织之外的胚区域可能作为离子辐射次靶，影响到最终的辐射生物学效应. 关键词： 离子辐照 拟南芥 胚区域 生物效应     

Darboux transformation and solitons of Yang-Mills-Higgs equations in R2,1

The Darboux transformations for soliton equations are applied to the Yang-Mills-Higgs equations.New solutions can be obtained from a known one via universal and purely algebraic formulas. SU(N) soliton solutions are constructed with explicit formulas. The interaction of solitons is described by the splitting theorem:each p-soliton is splitting into p single solitons asymptotically as t →±∞.     

COMPLETE EXTREMAL SURFACES OF MIXED TYPE IN 3-DIMENSIONAL MINKOWSKI SPACE

ＣＯＭＰＬＥＴＥＥＸＴＲＥＭＡＬＳＵＲＦＡＣＥＳＯＦＭＩＸＥＤＴＹＰＥＩＮ３－ＤＩＭＥＮＳＩＯＮＡＬＭＩＮＫＯＷＳＫＩＳＰＡＣＥ￥ＧＵＣＨＡＯＨＡＯ（ＩｎｓｔｉｔｕｔｅｏｆＭａｔｈｅｍａｔｉｃｓ，ＦｕｄａｎＵｎｉｖｅｒｓｉｔｙ，Ｓｈａｎｇｈａｉ２００...     

时分复用倍乘光脉冲重复率的新型光纤耦合器环状连接法分析

提出并详细分析了一种基于时分复用技术倍乘光脉冲重复率的方法：在２×２光纤耦合器的一个输入口与一个输出口间，接入时延为脉冲列半周期奇数倍的一段光纤使之形成环状连接循环耦合，而在另一输出口获得光脉冲。详细分析了该系统中光纤耦合器耦合比、插入损耗、时延光纤长度的要求，偏差的影响及其调节法，给出了理论公式、结果的计算机模拟与实验介绍；与经典的马赫陈德尔干涉仪接法及近年提出的Ｓａｇｎａｃ环接法进行了比较。该方法特别适用于对窄脉冲列进行串接复用实现重复率的多次倍乘，从而得到数千兆赫至上百千兆赫的高重复率光脉冲     

Titanium carbonitride films on cemented carbide cutting tool prepared by pulsed high energy density plasma

Hard films prepared by pulsed high energy density plasma (PHEDP) are characterized by high film/substrate adhesive strength, and high wear resistance. Titanium carbonitride (TiCN) films were deposited onto YG11C (ISO G20) cemented carbide cutting tool substrates by PHEDP at room temperature. XRD, XPS, SEM, AES, etc. were adopted to analyze the phases (elements) composition, microstructure and the interface of the films, respectively. The results show that, the uniform dense films are composed of grains ranging from 70 to 90 nm. According to the AES result, there is a broad transition layer between the film and the substrate, due to the ion implantation effect of the PHEDP. The transition layer is favorable for the film/substrate adhesion.     

Super-Wavelets and Decomposable Wavelet Frames

A wavelet frame is called decomposable whenever it is equivalent to a superwavelet frame of length greater than one. Decomposable wavelet frames are closely related to some problems on super-wavelets. In this article we first obtain some necessary or sufficient conditions for decomposable Parseval wavelet frames. As an application of these conditions, we prove that for each n > 1 there exists a Parseval wavelet frame which is m-decomposable for any 1 < m ≤ n, but not k-decomposable for any k > n. Moreover, there exists a super-wavelet whose components are non-decomposable. Similarly we also prove that for each n > 1, there exists a Parseval wavelet frame that can be extended to a super-wavelet of length m for any 1 < m ≤ n, but can not be extended to any super-wavelet of length k with k > n. The connection between decomposable Parseval wavelet frames and super-wavelets is investigated, and some necessary or sufficient conditions for extendable Parseval wavelet frames are given.     

Specular reflectance of cold-rolled aluminum surfaces

The specular reflectance of cold-rolled aluminum surface is studied using a fiber optic system. An approximation for the determination of surface roughness is presented.