EDFA增益谱的精确测量

本文设计一种精确测量EDFA增益谱方法,按照这种方法,不需要考虑EDFA的内部结构,使用较小功率的宽光谱光源和任意波长的激光器,能够较简便精确测量EDFA小信号增益.     

The Stability of Icosahedral Cluster and the Range of Interaction Potential

The relation between the stability of icosahedral clusters and the range of interaction potential is discussed.We found that the stability of icosahedral clusters nay decrease with decreasing range of interaction potential. A simple formula about the critical number of icosahedral clusters and the range of interaction potential (M1/3c = A1 A2r2eff)was proposed. The calculation of the stability of icosahedral fullerence molecular clusters shows that our idea is right.``     

自适应光学系统对实际大气湍流波前的时域校正效果

引入时域校正因子（系统团环校正波前残余误差与系统开环时的湍流波前扰动误差之比）和系统测量信噪比,分析了自适应光学系统对实际大气湍流扰动的时域校正效果与湍流功率指数、湍流功率谱转折频率、系统测量信噪比、系统时间延迟以及系统闭环带宽的关系,并给出了系统的最佳闭环带宽。此外还分析了弱光61单元自适应学系统的时域校正效果。     

组合利用统计和结构信息的道路提取算法

提出了一种组合利用统计和结构信息从遥感图像中提取道路的算法,这个算法包括三个处理步骤,利用道路的多种局部统计特性获得道路基元与道路段,以及利用能量函数提取道路边沿,在检测道路基元时,用统计分析来表达道路的结构信息,避免了提取线段来表达,增强了抗噪性与稳健性;在检测和拟合道路边沿时,能量函数中的参数由前面的运算结果确定,使算法具有自适应能力。     

含有注入信号的双向环形激光场中的驱动效应

用含有背散射和饱和效应的双模激光场的理论模型讨论了背散射和外加注入信号对环形激光场的统计性质的影响。结果表明,背散射可以抑制系统的涨落。对于均匀展宽的双向环形激光场,注入信号可以将其中的弱模光场由非相干光驱动成为相干光,而对于非均匀展宽的环形激光场则没有这种驱动效应。进一步研究发现,这种驱动效应与注入信号的强弱及两模式光场的抽运参量差异△α有关。     

Statistical Properties of a Ring Laser with Injected Signal and Backscattering

The Statistical Properties of a homogeneously broadened ring laser with an injected signal are investigated and the normalized two-mode intensity auto-and cross-correlation functions are calculated by a full saturation laser theory with backscattering.The theoretical predictions are in good agreement with the experimental measurements.Further inverstigation reveals that the backscattering can reduce the fluctuations in the system while the full saturation effect plays a major role when the laser is operated above threshold.It is also quite important to notice that the injected signal can drive the weak mode from incoherent light to coherent light.     

Optical channel waveguides with trapezoidal-shaped cross sections in KTiOPO4 crystal fabricated by ion implantation

Optical channel waveguides were fabricated in KTiOPO₄ crystal by He⁺-ion implantation using photoresist masks with wedged-shaped cross sections. Semi-closed barrier walls with reduced refractive indices inside the crystal constructed the enclosed regions to be channel waveguides with trapezoidal-shaped cross sections. The m-line as well as end-fire coupling arrangements were performed to characterize the waveguides with light at wavelength of 632.8 nm. The propagation loss of the channel waveguides was determined to be as low as ∼2 dB/cm after simple post-irradiation thermal annealing treatment in air.     

精确预言双原子分子Q线系高振转激发态的跃迁谱线

用多重差分的方法,从双原子分子跃迁谱线的普遍表达式出发,已经建立起了预言双原子分子P线系高激发振转跃迁谱线的解析物理公式。采用同样的方法,充分利用现有实验条件下测定的部分振转跃迁谱线数据,文章建立了预言双原子分子Q线系高激发振转跃迁谱线的物理公式。使用该公式和一组经过物理筛选的(15条)精确的实验跃迁谱线,研究了IrN分子A1Π—X1Σ+跃迁系统中(4,1),(3,1)跃迁带的Q支发射光谱。结果表明,该公式不仅很好地重复了所有已知的实验光谱数据,且正确预言了实验没有获得的很多高转动量子态的未知发射谱线,从而提供了一种新的预言高转动量子态的未知跃迁谱线的物理方法。     

A novel method for improving the adhesion strength of the electrodeposited Ni films in MEMS

Adhesion performance of MEMS materials is increasingly important with the widely use of miniaturized devices. This paper proposed a novel method for improving adhesion performance between electrodeposited Ni multi-layers. The new method is to treat the Ni substrate in nickel chloride plating solution by pulse reverse current technique before electrodeposition. The dense oxide film of Ni substrate can be removed effectively by this electrochemical method, meanwhile, the proper roughness of Ni substrate is in favor of epitaxial growth during electrodeposition. Moreover, the Ni film is electrodeposited by the new method with low stress and coarse crystal grain. Consequently, the adhesion performance of Ni films is improved dramatically. The experimental results show that the adhesion performance of Ni film electrodeposited by the new method is about 3 times that of by traditional method.     

Low-temperature liquid phase deposited TiO2 films on stainless steel for photogenerated cathodic protection applications

The low-temperature synthesis of anatase TiO₂ films was an imperative requirement for their application to corrosion prevention of metals. In this paper, a liquid phase deposition (LPD) technique was developed to prepare TiO₂ films on SUS304 stainless steel (304SS) at a relatively low temperature (80 °C). The as-prepared films were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy and X-ray photon spectroscopy (XPS). It was observed that a dense and crack-free anatase TiO₂ film with a thickness about 300 nm was obtained. The film contained some fluorine and nitrogen elements, and the amounts of these impurities were greatly decreased upon calcination. Under the white light illumination, the electrode potential of TiO₂ coated 304SS rapidly shifted to a more negative direction. Moreover, the photopotential of TiO₂/304SS electrode showed more negative values with increased film thickness. In conclusion, the photogenerated cathodic protection of 304SS was achieved by the low-temperature LPD-derived TiO₂ film.