Functionalized carbon nanotube/polyacrylonitrile composite nanofibers: fabrication and properties

The functionalized multi‐walled carbon nanotubes (f‐MWCNTs) were obtained by Friedel–Crafts acylation, which introduced aromatic amine groups onto the sidewall. And the grafted yield was adjusted by controlling the concentration of the catalyst. The composite solutions containing f‐MWCNTs and polyacrylonitrile (PAN) were then prepared by in‐situ or ex‐situ solution polymerization. The resulting solutions were electrospun into composite nanofibers. In the in‐situ polymerization, morphological observation revealed that f‐MWCNTs was uniformly dispersed along the axes of the nanofibers and increased interfacial adhesion between f‐MWCNTs and PAN. Furthermore, two kinds of f‐MWCNTs/PAN composite nanofibers had a higher degree of crystallization and a larger crystal size than PAN nanofibers had, so the specific tensile strengths and modulus of the composite nanofibers were enhanced. And the thermal stability of f‐MWCNTs/PAN from in‐situ method was higher than that of ex‐situ system. When the f‐MWCNTs content was less than 1 wt%, the specific tensile strengths and modulus of nanofibers were enhanced with increase in the amounts of f‐MWCNTs, and f‐MWCNTs/PAN of in‐situ system provided better mechanical properties than that of ex‐situ system. Copyright © 2010 John Wiley & Sons, Ltd.     

聚丙烯/POE共混组成对材料断裂行为的影响

采用基本断裂功(EWF)方法对聚丙烯(PP)/聚烯烃弹性体(POE)共混物的注射双边缺口拉伸试样的断裂行为进行了研究,比较了不同POE含量对共混物各断裂参数的影响.结果表明,PP和用量为5phr POE的共混物都可完全满足EWF方法的要求,共混物的断裂韧性-比基本断裂功we,较PP有显著提高;POE用量为10phr以上的共混物则出现明显的成颈现象而限制了EWF方法的应用;PP和各种POE用量的共混物都得到了其屈服所需要的比基本断裂功we,y和比塑性功β′wp,y.     

辊速辊温对高密度聚乙烯拉伸微孔膜及其片晶结构的影响

采用熔融挤出片材—退火—冷拉伸—热拉伸—热定形的方法来制备高密度聚乙烯(HDPE)微孔膜,利用FTIR、SEM和DSC等测试方法来研究辊速辊温对HDPE拉伸微孔膜及其片晶结构的影响.研究结果表明,所选树脂的分子量、分子量分布以及弛豫时间能够满足现有加工条件,形成片晶取向度较高的预制膜;在相同辊温下,随辊速增加,退火前预...     

水在纤维素水凝胶中的存在状态及对纤维素结晶的影响

制备了高度水合状态的纤维素凝胶, 研究了水在凝胶中的存在状态及其对纤维素结晶的影响. 结果表明, 水在纤维素水凝胶中存在非冻结水、 可冻结水和自由水3种状态. 非冻结水饱和含量为一般纤维素吸附水中不可冻结水的5倍以上, 高达1.6 g/g. 纤维素在水合状态下结晶受到抑制, 随着水含量的减小, 结晶会趋于完善. 在环境温度下, 当纤维素中只存在非冻结水时, 其与纤维素分子链间氢键作用力不稳定, 对纤维素结晶抑制作用较弱, 纤维素结晶比较完善, 导致纤维素断裂时表现为脆性断裂. 水介质的引入有望为纤维素的利用开发提供一种新的思路.     

超声速燃烧火焰稳定凹腔质量交换特性的数值研究

对超声速冷流条件下用于超燃冲压发动机的凹腔火焰稳定器的质量交换特性进行研 究. 采用混合RANS/LES方法对非定常流场进行数值模拟,考虑了凹腔的长深比和后缘角度两 个关键参数. 计算得到了凹腔剪切层拟序结构的演化过程. 对凹腔压力振荡历程进行幅频分 析,所得到的频率和理论分析结果及一些计算结果十分吻合. 结果表明,凹腔的长深比和后 缘倾角对凹腔质量交换过程都有较大的影响. 凹腔驻留时间随着长深比的增加而增加. 随着 后缘倾角减小,长深比较小的凹腔的驻留时间增加,长深比较大的凹腔则完全相反. 该计算 结果为凹腔设计提供了新认识.     

部分预混超声速燃烧火焰面模式研究综述

采用部分预混火焰面模式建模与仿真已经成为超声速燃烧数值研究的主要趋势之一.系统回顾了超声速燃烧火焰面模式的发展历程,针对其应用的两个基本问题进行总结:一是火焰面模式在超声速燃烧中的物理存在问题,二是超声速燃烧火焰面模式的建模问题.重点分析了火焰面模式应用于超声速燃烧的难点,提出了超声速燃烧火焰面模式建模应兼顾的问题.     

Numerical study on supersonic mixing and combustion with hydrogen injection upstream of a cavity flameholder

Characteristics of supersonic mixing and combustion with hydrogen injection upstream of a cavity flameholder are investigated numerically using hybrid RANS/LES (Reynolds-Averaged Navier–Stokes/Large-Eddy Simulation) method. Two types of inflow boundary layer are considered. One is a laminar-like boundary layer with inflow thickness of $\delta_{\inf } = 0.0$ and the other is a turbulent boundary layer with inflow thickness of $\delta_{\inf } = 2.5\,{\text{mm}}$ . The hybrid RANS/LES method acts as a DES (Detached Eddy Simulation) model for the laminar-like inflow condition and a wall-modeled LES for the turbulent inflow condition where the recycling/rescaling method is adopted. Although the turbulent inflow seems to have just minor influences on the supersonic cavity flow without fuel injection, its effects on the mixing and combustion processes are great. It is found that the unsteady turbulent structures in upstream incoming boundary layer interact with the injection jet, resulting in fluctuations of the upstream recirculation region and bow shock, and induce quick dispersion of the hydrogen fuel jet, which enhances the mixing as well as subsequent combustion.     

Deformation-induced morphology evolution during uniaxial stretching of isotactic polypropylene: effect of temperature

The effects of draw temperature on the deformation-induced morphology evolution of isotactic polypropylene in terms of crystal orientation, degree of crystallinity, crystal size in the direction normal to chain axis, long spacing, and the deformation behavior at the crystal lattice and lamellae scale were investigated using differential scanning calorimetry, two-dimensional wide-angle X-ray diffraction, and small-angle X-ray scattering, respectively. The results revealed that the thermal behaviors are associated with the deformation-induced morphology evolution, and the morphology evolution is strongly temperature dependent. At low strain, crystal fragmentation takes place at all the draw temperature range studied; at high strain, after crystal fragmentation the draw temperature shows different effects on the morphology evolution: at low temperature (25 °C), fragmentation of the crystal blocks continues; at medium temperatures (80 and 110 °C), the broken crystal blocks remain stable and the unfolded chains and disentangled chains in amorphous region crystallize into crystal blocks with crystal size almost identical to that of the original broken ones; at high temperatures (130 and 140 °C), not only the unfolded chains and disentangled chains in amorphous region crystallize into crystal blocks, but also these small broken crystal blocks melt and recrystallize and the new crystal blocks formed possess larger crystal size than those of the original broken ones.     

Engineering the dispersion of metamaterial surface for broadband infrared absorption

We propose a broadband infrared absorber by engineering the frequency dispersion of metamaterial surface (metasurface) to mimic an ideal absorbing sheet. With a thin layer of structured nichrome, a polarization-independent absorber with absorption larger than 97% is numerically demonstrated over a larger than one octave bandwidth. It is shown that the bandwidth enhancement is related with the transformation of the Drude model of free electron gas in metal film to the Lorentz oscillator model of a bound electron in the structured metallic surface. We believe that the concept of dispersion engineering may provide helpful guidance for the design of a broadband absorber.