光辐射吸收材料表面形貌与吸收率关系研究

光辐射吸收材料不同的表面形貌对入射光具有不同的多重反射吸收效果,对光辐射的吸收有较大的影响,合适的表面形貌可以提高光辐射有效吸收率.本文通过光线追迹的方法对V形表面、正弦表面、具有正态倾角(平均倾角)分布的表面以及具有正态高度分布的表面进行模拟, 分析了这四种表面对光辐射吸收率的提升效果及其入射角特性.通过倾角分布分析,得出不同表面形貌提升吸收率共同的必要条件,即倾角中心分布至少大于30°,并指出V形表面在正入射时对吸收率提升的优越性. 关键词： 光吸收材料 表面形貌 吸收率 表面倾角分布     

Si(001)衬底上分子束外延生长Ge0.975Sn0.025合金薄膜

使用低、高温两步法生长的高质量Ge薄膜作为缓冲层,在Si(001)衬底上采用分子束外延法生长出Ge_0.975Sn_0.025合金薄膜.X射线双晶衍射和卢瑟福背散射谱等测试结果表明,Ge_0.975Sn_0.025合金薄膜具有很好的晶体质量,并且没有发生Sn表面分凝.另外,Ge_0.975Sn_0.025合金薄膜在500 ℃下具有很好的热稳定性,有望在Si基光电器件中得到应用. 关键词： GeSn Ge 分子束外延 外延生长     

In0.3Co4Sb12-xSex 方钴矿热电材料的制备和热电性能

用熔融退火结合放电等离子烧结法制备了In_0.3Co₄Sb_12-xSe_x(x=0—0.3)方钴矿热电材料,探讨了In的存在形式,系统研究了Se掺杂量对结构和热电性能的影响.结果表明:In可以填充到方钴矿二十面体空洞处,过量In在晶界处形成InSb第二相,Se对Sb的置换使晶格常数减小,In填充上限降低;In_0.3Co₄Sb_12-xSe_x样品呈n型传导,随着Se掺杂量的增大,载流子浓度降低,电导率下降,Seebeck系数增大,功率因子有所降低;由于在结构中引入了质量波动及晶格畸变,适量的Se掺杂可以大幅降低材料晶格热导率;样品In_0.3Co₄Sb₁₂和In_0.3Co₄Sb_11.95Se_0.05的最大ZT值均达到1.0以上. 关键词： 掺杂 填充式方钴矿 热电性能     

高功率固体激光装置光学元件"缺陷"分布与光束近场质量的定量关系研究

基于光传输理论,获得了弱调制情况下光学元件"缺陷"分布功率谱密度 (power spectral density, PSD)与光束近场强度分布PSD之间的定量关系;通过数值模拟的方法,针对高功率固体激光装置的基本单元(线性介质、非线性介质以及空间滤波器)对获得的理论关系进行了具体的验证和讨论.研究结果表明,弱调制下,只存在振幅型或位相型"缺陷"分布时,光学元件"缺陷"分布PSD与光束近场强度分布PSD通过近场强度分布PSD的系统传输因子联系,传输因子与系统的构型和运行状态有关.研究结果为光学元件"缺陷"分布指标的获得提供了理论基础,对高功率固体激光装置负载能力的提升起到了一定的指导作用. 关键词： 缺陷分布 功率谱密度 光学元件 光束质量     

A flexible fast 3D profilometry based on modulation measurement

This paper proposes a flexible fast profilometry based on modulation measurement. Two orthogonal gratings through a beam splitter are vertically projected on an object surface, and the measured object is placed between the imaging planes of the two gratings. Then the image of the object surface modulated by the orthogonal gratings can be obtained by a CCD camera in the same direction as the grating projection. This image is processed by the operations consisting of performing the Fourier transform, spatial frequency filtering and inverse Fourier transform. Using the modulation distributions of two grating patterns, we can reconstruct the 3D shape of the object. In the measurement process, we only need to capture one fringe pattern, so it is faster than the MMP and remains the advantages of it. In the article, the principle of this method, the setup of the measurement system, some simulations and primary experiment results are given. The simulative and experimental result proves it can restore the 3D shape of the complex object fast and comparatively accurate. Because only one fringe pattern is needed in the testing, our method has a promising extensive application prospect in real-time acquiring and dynamic measurement of 3D data of complex objects.     

Tunable nonlinear absorption of hydrogenated nanocrystalline silicon

Nonlinear absorption (NLA) of hydrogenated nanocrystalline silicon (nc-Si:H) has been investigated through the open aperture Z-scan method for the photon energy of the incident irradiance slightly less than the bandgap of the sample. NLA responses have been observed to be highly sensitive to the wavelength and intensity of the incident irradiance as well as to the bandgap of the sample, indicating greatly tunable NLA of nc-Si:H. The band tail of nc-Si:H appears to play a crucial role in such NLA responses.     

Mechanical and corrosion resistance of hydrophilic sphene/titania composite coatings on titanium and deposition and release of cefazolin sodium/chitosan films

The mechanical and corrosion resistance of hydrophilic sphene/titania composite coatings on titanium formed by a hybid technique of microarc oxidation (MAO) and heat-treatment were investigated. The results indicated that the heat-treatment could improve the hardness, elastic modulus, elastic recovery and corrosion resistance of the MAO coatings, and reinforce the interface bonding between MAO coatings and titanium. A cefazolin sodium/chitosan drug film was prepared on the coating surfaces. The drug load procedures such as the addition of chitosan obviously increased the sustained-release ability of drug films. In addition, the increase of cefazolin sodium concentration could increase the accumulative release concentration of cefazolin sodium. The sustaining-release ability of drug films deposited on the MAO and heat-treated MAO coatings is similar. In the interior of drug film, the physical and chemical bonding reactions such as Coulombic interactions, van der Waals force and H-bonding etc. could be produced, through the chemical group interactions such as -OH and -NH₂ groups of chitosan with -CO of cefazolin sodium.     

绝对编码光栅的相位细分及其在位移测量中的应用

提出通过光栅条纹相位的精密测量,获取光栅高精度位移信息的方法。具体方法是对光栅图像采用多码道设计,用CCD二维图像传感器获取测量段光栅图像多码道信息。对最低码道图形的周期函数序列进行傅里叶变换、基频滤波和逆傅里叶变换获得光栅截断相位分布,其余码道信息提供相位展开的级次,以此获得测量段光栅的绝对相位分布。用光刻的手段制作了实用的绝对编码光栅,基元码道的尺寸是:27.36μm用于明条纹,27.36μm用于暗条纹,最小基元码道空间周期为54.72μm,光栅长度为14008.32μm。在步长近似3μm的位移测试中,与比对的标准仪器记录值比较,标准偏差为0.2057μm,精度在亚微米量级。重复性实验表明,位置测试的稳定性为0.09μm(标准差),得到600倍以上细分的分辨力。     

Facile synthesis and capacitive performance of the Co(OH)2 nanostructure via a ball-milling method

Co(OH)₂ nanoparticles were synthesized using only CoSO₄·7H₂O and NaOH as reactants without other auxiliary reagents via a simple, low-cost and practical ball-milling technique and investigated as the active electrode materials for supercapacitors. The structure and morphology of the resulting Co(OH)₂ samples were examined by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and transmission electron microscopy (TEM). The observations revealed the formation of brucite-like phase of β-Co(OH)₂, which had an irregular sphere-like shape with an average size of 50-100 nm. When investigated as electrode materials for supercapacitors, the β-Co(OH)₂ exhibited good energy-storage performances in terms of high specific capacitance of 599 F g⁻¹ and excellent capacity retention, suggesting its potential application in the electrode material for supercapacitors.     

Preparation and characterization of bifunctional, Fe3O4/ZnO nanocomposites and their use as photocatalysts

Bifunctional magnetic-optical Fe₃O₄/ZnO nanocomposites with different molar ratio were successfully synthesized by a facile two-step strategy. Compared with the other methods, it was found to be mild, inexpensive, green, convenient and efficient. Fe₃O₄ nanocrystal was used as seed for the deposit and growth of ZnO nanoparticle. A series of the characterizations manifested that the combination of Fe₃O₄ with ZnO nanoparticles was successful. Photocatalytic activity studies confirmed that as-prepared nanocomposites had excellent photodegradating behavior to Methyl Orange (MO) compared to the pure ZnO nanoparticles. The results showed that the degradation percentage of MO was about 93.6% for 1 h when the amount of catalyst was 0.51 g L⁻¹ and initial concentration of MO was 6 × 10⁻⁵ mol L⁻¹ in the pH 7 solution. Moreover, the kinetics of photocatalytic degradation reaction could be expressed by the first-order reaction kinetic model. Furthermore, the Fe₃O₄/ZnO nanocomposites could be also served as convenient recyclable photocatalysts because of their magnetic properties.