Organocatalytic and Scalable Synthesis of the Anti‐Influenza Drugs Zanamivir,Laninamivir, and CS‐8958

Zanamivir, laninamivir, and CS‐8958 are three neuraminidase inhibitors that have been clinically used to combat influenza. We report herein a novel organocatalytic route for preparing these agents. Only 13 steps are needed for the assembly of zanamivir and laninamivir from inexpensive D ‐araboascorbic acid by this synthetic route, which relies heavily on a thiourea‐catalyzed enantioselective Michael addition of acetone to tert‐butyl (2‐nitrovinyl)carbamate and an anti‐selective Henry reaction of the resulting Michael adduct with an aldehyde prepared from D ‐araboascorbic acid. The synthetic procedures are scalable, as evident from the preparation of more than 3.5 g of zanamivir.     

Ring Opening of N‐Sulfonyl Aziridines by Amines in Silica‐Water

Ring opening reactions of N‐sulfonyl aziridines by primary and secondary amines in silica gel (SG)‐water system were achieved, which provided a mild, practical and environmentally benign method to synthesize mono‐ and bis‐sulfonyl substituted amines. When primary and secondary amines were used in excess, they reacted with N‐sulfonyl aziridines smoothly at room temperature, mainly affording 1:1 ring opening products. Reactions of primary amines with 2 equiv. of aziridines produced 2:1 ring opening products. Some 1:1 products can be cyclized with CS₂ to synthesize N‐sulfonyl cyclothioureas also in water.     

The promoting role of minor amount of water in solvent-free hydrogenation of halogenated nitrobenzenes

This study shows that minor amount of water plays a very important role in solvent-free hydrogenation of halogenated nitrobenzenes. For dried sponge Pd, the reaction cannot occur in the absence of water. For Pd/C catalyst, minor amount of water reduces the induction time, increases the reaction rate and reaction TOFs. Water might enhance the diffusion, adsorption and dissociation of H2 on Pd catalysts.     

Synthesis and thermal properties of novel calix[4]arene derivatives containing 1,2,3-triazole moiety via K2CO3-catalyzed 1,3-dipolar cycloaddition reaction

Two calix[4]arene derivatives containing 1,2,3-triazole moiety were synthesized via K2CO3-catalyzed1,3-dipolar cycloaddition reaction between calix[4]arene-based azide and active methylene compounds in good yields.The structures of the two compounds synthesized herein were fully confirmed by 1HNMR,,（13）C NMR,and MS（ESI）.The thermal analysis showed that the mass losses of the synthesized compounds 4 and 5 containing 1,2,3-triazole groups are similar to each other.     

An efficient ionic liquid supported divergent assembly of 3,6-branched glucosamine-containing pentasaccharide

We utilized the glycosyl acceptor tagging method with ionic liquid support for synthesis of the core segment of Clostridium botulinum C2 toxin ligand through a divergent synthetic strategy without chromatographic purification.The total yield was 57.1% and the reaction was completed in 10 h.The efficient ionic liquid supported glycosylation and purification procedure was applied for the synthesis of branched glucosamine-containing oligosaccharides for the first time,which expanded the scope of ionic liquid supported synthesis of biologically important oligosaccharides.     

Efficient oxidation of ethylbenzene catalyzed by cobalt zeolitic imidazolate framework ZIF-67 and NHPI

Efficient catalytic oxidation of ethylbenzene to acetophenone was realized using the catalytic system of cobalt zeolitic imidazolate framework ZIF-67/N-hydroxyphthalimide （NHPI） under mild conditions. 95.2% conversion of ethylbenzene with 90.3% selectivity to acetophenone could be obtained at 373 K under 0.3 MPa 02 for 9 h. The results show that there exists synergetic effect between ZIF-67 and NHPI. 1-Phenylethyl hydroperoxide （PEHP） was generated via a radical process involving the hydrogen abstraction from ethylbenzene by phthalimide N-oxyl, and subsequently effectively decomposed to acetophenone by ZIF-67.     

多壁碳纳米管修饰玻碳电极测定铜离子

以多壁碳纳米管(MWCNTs)修饰玻碳电极为工作电极,采用阳极溶出线性扫描法研究了铜离子的电化学测定方法。探讨了MWCNTs修饰层数、富集电位、富集时间、溶液pH、支持电解质对峰电流的影响。实验表明,铜离子浓度在1.0×10-8~1.0×10-5mol·L-1范围内与峰电流呈良好的线性关系,检测限为2.0×10-9mol·L-1,且该电极具有良好的稳定性和抗干扰能力。     

固相萃取富集/气相色谱法测定烟草中的9种有机酸

建立了用硫酸甲醇甲酯化衍生-固相萃取富集/气相色谱测定烟草中9种有机酸的方法,首次实现了强酸介质中有机酸酯的固相萃取。烟草样品用硫酸-甲醇进行甲酯化衍生,衍生生成的有机酸酯用MCIGEL反相树脂分离富集,萃取液用甲醇洗脱后进行气相色谱分析,采用DB-5毛细管色谱柱,进样量1.0μL,不分流进样;检测器温度250℃。方法可同时准确测定烟草样品中乳酸、草酸、丙二酸、乙酰丙酸、苹果酸、柠檬酸、棕榈酸、硬脂酸、亚油酸的含量,各有机酸的加标回收率为92.2%~102.6%,相对标准偏差为2.4%~3.2%,定量下限为0.20~0.36 mg/L。该方法准确、灵敏度高,能够满足实际样品的测定要求。     

Ni/SAPO-11催化剂上棕榈油加氢脱氧制异构烃燃料(英)

采用水热法合成了小粒径、具有介孔结构的SAPO-11分子筛.采用浸渍法制备了不同Ni负载量的Ni/SAPO-11催化剂.并采用X射线衍射,扫描电镜,N₂物理吸附-脱附,NH₃程序升温脱附,热重和H₂化学吸附技术对该类催化剂的物理化学性质进行了详细表征.结果表明,SAPO-11较大表面积和介孔结构可分散Ni,使得Ni粒子尺寸较小.在棕榈油加氢脱氧制备液体烃类燃料反应中,液体烷烃产物由相关脂肪酸中间产物的直接加氢脱氧和脱羰-加氢脱氧两种途径产生.Ni/SAPO-11催化剂的弱/中强酸性质及其匹配的金属-酸双功能可显著抑制积炭反应,提高催化剂的寿命,液体烷烃收率高达70%,异构烷烃选择性超过80%.     

氮掺杂石墨烯的生长机理及其在乙苯选择性氧化中的应用

以热解氧化石墨烯材料为碳基底,分别使用有机氮源和无机氮源对其进行氮掺杂处理,制备了一系列氮掺杂石墨烯材料.采用透射电子显微镜、扫描电子显微镜、拉曼光谱和X射线光电子能谱等表征方法考察了氮掺杂石墨烯的生长机理.结果表明,随着制备过程中退火温度的改变,氮掺杂石墨烯中不同氮物种的含量有显著差别.这种差异是由不同氮物种化学环境的差异所导致的.所制备的含氮石墨烯材料对乙苯选择性氧化制苯乙酮反应均表现出优良的催化活性.其中,石墨氮的含量对于提高苯乙酮收率起到至关重要的作用.此外,通过氧化剂控制活化的方法可以消除过多的结构缺陷和过量氮掺杂对催化反应的不利影响,有效提升氮掺杂石墨烯的催化活性.