Traceless solid-phase synthesis of nitrogen-containing heterocycles and their biological evaluations as inhibitors of neuronal sodium channels

The preparation of pyrimidine-2-thione, pyrimidine-2-one, pyrimidine, and benzo[b][1,4]diazepine derivatives using traceless solid-phase sulfone linker strategy is described. Key steps involved are (i) sulfinate S-alkylation, (ii) sulfone anion alkylation with an epoxide, (iii) gamma-hydroxyl sulfone --> gamma-ketosulfone oxidation, and (iv) traceless product release by a one-pot elimination-cyclization process. Elimination-cyclization was carried out under basic conditions with thiourea, methyl thiourea, methyl urea, guanidine hydrochloride, benzamidine hydrochloride and ortho-phenylene diamine. Twenty-three compounds were prepared, and 14 of them were evaluated by the Batrachotoxin (BTX) radioligand binding assay for their binding affinity to neuronal sodium channels. Compound 7c was found to be a potential neuronal sodium channels blocker.     

Effect of the Secondary Reduction on the Enantioselectivity and Function of Additives in the Chiral Oxazaborolidine‐Catalyzed Asymmetric Borane Reduction of Ketones

The secondary reduction in the direct and oxazaborolidine‐catalyzed asymmetric borane reduction of ketones was investigated by the use of GC/MS tracing titration and control experiments. The results indicate that the secondary reduction affects the enantioselectivity only in noncoordinated solvents at low temperature and not under the usual catalytic reduction conditions because the intermediate alkoxyborane is unstable and quickly converts to borane and dialkoxyborane. The function of an alcohol additive in the asymmetric borane reduction of ketones is to consume excess borane in the reduction system thus inhibiting noncatalytic reduction, which leads to increased enantioselectivity in the catalytic reduction.     

柠檬酸铝/聚丙烯酰胺胶态分散凝胶反应动力学和机理的研究

采用粘度法研究了柠檬酸铝（AlCit)与部分水解取丙烯酰胺（HPAM）胶态分散凝胶体系的反应动力学。结果表明，胶态分散凝胶体系的交联反应是一级反应。并推导出胶态分散凝胶体系的反应动力学方程。     

羟基铝溶液及铝交联蒙脱土的研究

本文用(27)~Al NMR法和8-羟基喹啉萃取法分别研究了羟基铝溶液中十三聚铝含量的变化规律,还用X-射线衍射法研究了铝交联蒙脱土d_(001)的变化。研究结果表明,铝离子的聚合情况主要由羟铝比决定,而浓度影响不大。随着羟铝比的增加,溶液中单核铝离子含量减少,十三聚铝离子相对含量增加,所得铝交联蒙脱土的d_(001)也随之增大。参照这些变化规律、控制羟基铝溶液的组成,可以制备各种层柱状铝交联蒙脱土复合物。     

Selenium Nanoparticles Prepared from Reverse Microemulsion Process

Selenium nanoparticles were prepared by a reverse microemulsion system. Sodium selenosulfate was used as selenium source. The results showed that hydrochloric acid concentration and reaction temperature had great influence on the morphology of products. The crystalline selenium nanowires and amorphous selenium nanorods were obtained in given condition.     

PU大分子单体水溶液性质

双亲聚合物一般由亲水和亲油 2种链段构成 ,有嵌段型[1,2 ] 和接枝型[3 ] 2种 ,其中通过大分子单体法合成双亲接枝聚合物备受关注[4] 。如以亲水性大分子单体和亲油性小分子单体共聚 ,大分子单体构成共聚物主链上支链 ,具有较大活动性 ,亲水效能高。采用对氯甲基苯乙烯[5] 或甲基丙烯酰氯[6] 与聚氧化乙烯大分子的一端相反应 ,可得到亲水性大分子单体 ,但其分子量及结构变化有限。本文采用常规条件 ,合成了嵌段式水溶性聚氨酯大分子单体 ,其分子量较大 ,共聚接枝的支链较长。利用该大分子单体具有非离子高分子表面活性剂的性质 ,采用无皂乳…     

Locally enhanced relative humidity for scanning probe nanolithography

The formation of a water meniscus between a sharp tip and a solid surface is one of the prevailing requirements for scanning probe microscope (SPM)-based lithographies, such as dip-pen nanolithography (DPN) and conductive tip induced oxidation. The water meniscus functions as a medium for the oxidation of or mass transfer to the solid surface. Here we report a simple, efficient, and effective approach to enhance the local relative humidity and thus increase the size of the water meniscus by bringing a water-containing capillary tube to the proximity of the tip-surface contact area. The enhancement in local relative humidity is confirmed via an increase in the measured tip-surface adhesion forces and the widths of DPN generated parallel lines. Compared to the global control of relative humidity for the whole lithography system, the short distance between the "water reservoir" and the tip-surface contact area enables rapid increase in the local vapor pressure of water, less perturbation, and minimal erosion to the state-of-the-art electronics. As a result, most scanning probe lithography experiments at high relative humidity can now be performed in a reasonable time frame.     

Fluorinated poly(arylene ether ketone)s bearing pentafluorostyrene moieties prepared by a modified polycondensation

The polycondensation of decafluorobenzophenone with hexafluorobisphenol A was modified by the addition of a molecular sieve dehydrating apparatus to the refluxing reaction system. This modification promoted the polymerization and enabled the reactions to be conducted in milder conditions and completed in a shorter time, thereby depressing side reactions such as branching and crosslinking. The resulting fluorinated poly(arylene ether ketone)s (FPAEK) were free of gel particles and possessed the designed molecular weights. This modified procedure was also suitable for introducing crosslinkable pentafluorostyrene (FSt) moieties into the polymers at the chain ends and/or inside the chain with the vinyl group of FSt being pendant. The resulting FSt containing fluorinated poly(arylene ether ketone)s (FPAEK‐FSt) can then be thermally crosslinked at 100 °C in the presence of 1% benzoyl peroxide (BPO) or at 250 °C without any initiator. The glass‐transition temperatures (T_g's) of FPAEK increased with increasing molecular weight and leveled off at about 147 °C for the polymer with a number‐average molecular weight of 18,600 Da, whereas the values were not apparently affected by the addition of FSt units. However, crosslinking of the FPAEK‐FSt resulted in an approximate 30 °C increase of the T_g. Spin‐coating FPAEK‐FSt onto silicon wafers followed by crosslinking gave films with excellent thermal stability, physical strength, and adhesion to the substrate as well as good reproducibility in terms of film preparation and optical properties. The refractive index and birefringence of the films measured at a wavelength of 1.55 μm were 1.502 and 2.5 × 10^?3, respectively. © 2002 Government of Canada. Exclusive worldwide publication rights in the article have been transferred to Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4205–4216, 2002     

黄原胶以三价铬交联的水凝胶的脱水行为

对黄原胶／三价铬水凝胶在７０，８０和９０℃下的脱水行为进行了研究．脱水与凝胶的交联密度即参与交联反应的三价铬的含量有密切联系．突发脱水之后的过程可以用一级反应动力学描述，反应速度常数随三价铬的浓度和温度的增高而增大，活化能为３４．５ｋｃａｌ／ｍｏｌ．一价盐（ＮａＣｌ）的含量对脱水过程没有影响．