安培检测芯片毛细管电泳及其初步应用

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Relative standard deviations of not more than 5.2% were obtained for both peak currents and migration times of DA and CA (n=5). Using standard adding method, DA in tLrine and plasma samples was detected. The recoveries were in the range of 83%—103%.     

Thermal degradation of wood treated with guanidine compounds in air: Flammability study

Wood has been treated with guanidine phosphate, guanidine nitrate, guanidine carbonate and guanidine chloride to impart flame retardancy. The samples were subjected to differential thermal analysis (DTA) and thermogravimetry (TG) from ambient temperature to 800°C in air to study their thermal behaviors. From the resulting data, kinetic parameters for different stages of thermal degradation were obtained following the method of Broido. For the decomposition of wood and flame retardant wood, the activation energy was found to decrease from 116 to 54 kJ mol^–1; the char yield was found to increase from 5.6 to 34.9%, LOI from 18 to 41.5, which indicated that the flame retardancy of treated wood was improved. Effects of the different compounds on the degradation and flammability of wood have also been proposed.This revised version was published online in November 2005 with corrections to the Cover Date.     

Selective Oxidation of Methane to Methanol Using Molecular Oxygen on MoOx／（LaCoO3＋Co3O4） Catalysts

Comparatively high CH3OH selectivity (60.0%) and yield (6.7%) were obtained on MoOx/(LaCoO3 Co3O4) catalysts in selective oxidation of methane to methanol using molecular oxygen as oxidant. The interaction between MoOx and La-Co-oxide modified the molecular structure of molybdenum oxide and the ratio of O^-/O^2- on the catalyst surface, which controlled the catalytic performance of MoOx/(LaCoO3 Co3O4) catalysts.     

Synthesis and Photophysical and Electrochemical Study of Tyrosine Covalently Linked to High‐Valent Copper(III) and Manganese(IV) Complexes

As bio‐inspired chemical model of the oxygen‐evolving complex (OEC) in photosystem II, a new tyrosine‐modified corrole ligand 3 and its high‐valent copper and manganese complexes 3a and 3b were synthesized and characterized. The copper complexes 1a and 2a of corrole 1 and 2 were also prepared for comparison. The emission property indicates that the emission of ligands 2 and 3 is located at 670 nm, but no emission is observed for their metal complexes due to its suppression by the metal center. The electrochemical study shows that 3a might dimerize at the first two reversible oxidations, a behavior which was not observed in the case of 1a and 2a . The corrolato manganese(IV) complex 3b shows one reversible reduction and one quasireversible oxidation at ?0.17 and 0.77 V vs. Ag/Ag⁺, respectively.     

Preparation and Characterization of Mixed‐Valent Nickel Oxide/Nickel Hexacyanoferrate Hybrid Films and Their Electrocatalytic Properties

Polynuclear mixed‐valent nickel oxide and nickel hexacyanoferrate hybrid film was prepared on glassy carbon electrode by multiple scan cyclic voltammetry. The film growth was monitored using electrochemical quartz crystal microbalance (EQCM). The cyclic voltammogram of the nickel hexacyanoferrate film is characterized by single redox couple whereas nickel oxide/nickel hexacyanoferrate hybrid film exhibits two redox couples. Cyclic voltammetric features suggest that the charge transfer process in both films resembles that of surface‐confined redox species. In stronger basic solution (pH ≥9), nickel hexacyanoferrate film was gradually converted into nickel oxide film during potentiodynamic cycling. The peak potential of nickel oxide redox couple moved into more negative side with increasing pH of contacting solution whereas the peak potential of nickel hexacyanoferrate redox couple remains the same. Electrocatalytic behavior of hybrid film coated electrodes toward ascorbic acid, hydrazine and hydroxylamine was investigated using cyclic voltammetry technique. Analytical application of nickel oxide/nickel hexacyanoferrate hybrid film electrode was tested in amperometry and flow injection analysis.     

On the factors affecting the enhanced resonance light scattering signals of the interactions between proteins and multiply negatively charged chromophores using water blue as an example

Electrostatic interactions of proteins, including bovine serum albumin (BSA), human serum albumin (HSA), γ-globulin (γ-IgG), α-chymotrypsin (Chy), lysozyme (Lys) and cellulase (Cel), with multiply negatively charged chromophores were investigated based on the measurements of the enhanced resonance light scattering (RLS) signals. Using triply negatively charged water blue (WB) as an example, the factors were discussed that affect the enhanced resonance light scattering signals of the interactions between proteins and the negatively charged chromophores. It was found that the enhanced RLS signals with the maximum light scattering peak at 346.0 nm in these interacting systems are strongly dependent on the isoelectric points of proteins and show adverse linear relationships with increasing ionic strength depending on the positive charges of the inorganic metal ions used to control the ionic strength of the medium, sufficiently disclosing that the electrostatic attraction performs an important role in the combination of proteins with WB. Linear responses were discovered between the enhanced RLS signals and the protein molecular weights (M_w), displaying the dimensions of scattered particles formed by proteins and WB make a key contribution to the RLS enhancements. An empirical equation is proposed which possibly displays the factors affecting the enhanced RLS signals of the interactions between proteins with negatively charged chromophores.     

Generalization of in-situ polymerization method for preparing core-shell polymeric nanospheres and hollow spheres

According to the new method of preparing core-shell nanospheres developed by our group, by using two monomers, 2-hydroxypropyl methacrylate(HPMA) and vinyl acetate(VAc), two kinds of core-shell nanospheres with poly(ɛ-caprolactone) (PCL) as the core and crosslinked poly(2-hydroxypropyl methacrylate) (PHPMA) or poly(vinyl acetate) (PVAc) as the shell were successfully prepared under similar conditions. After degrading the PCL cores of the two kinds of nanospheres by lipase, the corresponding crosslinked poly(methyl acrylic acid) hollow spheres and crosslinked poly(vinyl alcohol) hollow spheres were obtained. Results indicate that the new method we proposed for preparing core-shell polymeric nanospheres via in-situ polymerization can be generalized to a certain extent, and it is suitable for many systems provided the monomer used is soluble in water, while its corresponding polymer is insoluble in water. Translated from Chemical Journal of Chinese University, 2006, 27(9): 1762–1766 [译自: 高等学校化学学报]     

极性非质子溶剂与甲醇或1,2-二氯乙烷的汽液平衡

使用双沸点仪测定了丙酮、乙酸乙酯、对二氧六环、乙腈或三乙胺与甲醇或1,2→二氯乙烷以及二者混合物等十一组二元体系在99.3 kPa下的汽液平衡数据(T,x,p), 计算了有关体系的过量吉布斯自由能。结果表明, 六种非质子溶剂与甲醇组成的二元系GE>0; 乙腈或三乙胺与1,2-二氯乙烷组成的二元系GE>0, 而丙酮、乙酸乙酯或对二氧六环与1,2-二氯乙烷的二元混合物GE<0。从同种分子间或不同种分子间的缔合作用对上述结果进行了讨论。本文还在固定极性非质子溶剂(第三组分)物质的量浓度的条件下, 测定了非质子溶剂+1,2-二氯乙烷+甲醇三元混合物的汽液平衡数据, 考察了非质子溶剂的加入对甲醇+1,2-二氯乙烷二元系GE的影响。     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.