26Al的加速器质谱测量及其应用

26Al是一个在多个学科都非常有意义的放射性核素。主要介绍了国内外在利用加速器质谱技术测量26Al时所开展的各种测量方法、各自的优缺点和测量灵敏度，并介绍了目前利用^26Al在地球科学、生物医学、核物理以及天体物理等诸多方面的应用研究工作。     

A Rapid Solid-phase Synthesis to Soluble Oligothiophene Molecular Wires

A novel method for the preparation of oligothiophene molecular wires is described via a bi-directional solid-phase synthesis. Using an alternating sequence of bromination and Stille coupling reactions, oligomers were obtained up to the heptamer in excellent yield and purity.     

强混合样本下回归加权估计的一致渐近正态性

在强混合样本下,讨论固定设计回归模型的加权函数估计的一致渐近正态性,给出一致渐近正态性的收敛速度,这个速度接近n-1／6．     

KNSBN晶体猫式互抽动相位共轭光特性

在KNSBN：Ce晶体中，利用二波耦合作用，在单一光束无法获得相位共轭光的条件下，实现了“猫”式互抽运相位共轭光输出，获得较高的共轭光发射率，实验结果表明，晶体的二波耦合作用可以使晶体的自抽运相位共轭光的阈值光强降低。入射光的入射角范围增大，响应时间缩短。     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

TiN/Al2O3纳米多层膜的共格外延生长及超硬效应

采用多靶磁控溅射法制备了一系列具有不同Al2O3调制层厚度的TiN/Al2O3纳米多层膜.利用X射线能量色散谱、X射线衍射、扫描电子显微镜、高分辨透射电子显微镜和微力学探针表征了多层膜的成分、微结构和力学性能.研究结果表明,在TiN/Al2O3纳米多层膜中,单层膜时以非晶态存在的Al2O3层在厚度小于1.5 nm时因TiN晶体层的模板效应而晶化,并与TiN层形成共格外延生长,相应地,多层膜产生硬度明显升高的超硬效应,最高硬度可达37.9 GPa.进一步增加多层膜中Al2O3调制层的层厚度,Al2O3层逐渐形成非晶结构并破坏了多层膜的共格外延生长,使得多层膜的硬度逐步降低.     

高能e+e－湮没强子多重数的质量关系

利用一个描述强子质量谱成功的夸克模型确定出得到的强子多重数普适质量关系〈n〉=aexp(–bm)中的参数b,发现对于介子、重子是一个普适的常数.利用这个质量公式给出计算各种粒子多重数的表达式,进而以高能e⁺e^－湮没为例计算出各种粒子多重数与实验以及其他模型做了比较,表明这个没有任何假定的质量关系同样能够解释实验.     

Robust Bayesian Inference for Seemingly Unrelated Regressions with Elliptical Errors

Bayesian inference is considered for the seemingly unrelated regressions with an elliptically contoured error distribution. We show that the posterior distribution of the regression parameters and the predictive distribution of future observations under elliptical errors assumption are identical to those obtained under independently distributed normal errors when an improper prior is used. This gives inference robustness with respect to departures from the reference case of independent sampling from the normal distribution.     

退火对电子束热蒸发193nm Al2O3/MgF2反射膜性能的影响

设计并镀制了193nm Al2O3/MgF2反射膜,对它们在空气中分别进行了250-400℃的高温退火,测量了样品的透射率光谱曲线和绝对反射率光谱曲线.发现样品在高反射区的总的光学损耗随退火温度的升高而下降,而后趋于饱和.采用总积分散射的方法对样品在不同退火温度下的散射损耗进行了分析,发现随着退火温度的升高散射损耗有所增加.因此,总的光学损耗的下降是由于吸收损耗而不是散射损耗起主导作用.对Al2O3材料的单层膜进行了同等条件的退火处理,由它们光学性能的变化推导出它们的折射率和消光系数的变化,从而解释了相应的多层膜光学性能变化的原因.反射膜的反射率在优化联系、镀膜工艺与退火工艺的基础上达98%以上.     

高性能ZnO纳米块体材料的制备及其拉曼光谱学特征

利用六面顶高压设备制备了高密度、低脆性、纳米级的ZnO块体材料，用MDI/JADE5 X射线衍射仪(Cu靶)和XL30S-FEG场发射扫描电子显微镜对高压样品的相组成、晶粒尺寸及微观形貌进行了表征.利用E55+FRA106/5傅里叶变换激光拉曼光谱仪通过ZnO块体样品位于50—500cm^-1之内的拉曼光谱, 研究了极性半导体纳米材料的拉曼光谱学特征.发现在极性半导体ZnO纳米块体材料中，没有出现明显的尺寸限制效应. 关键词： ZnO纳米块体 拉曼光谱 尺寸限制效应