HIGHLY SENSITIVE SPECTROPHOTOMETRY OF NIOBIUM

In pH2.0-3.0,niobium(V)forms molybdonlobic acid with sodiummolybdate.A spectrophotometric method has been developed for the deter-mination of niobium based on the formation of ion-associate compound ofmolybdoniobate with Butyl Rhodamine B in aqueous solution in the presenceof polyvinyl alcohol and 0.4-0.7 mol/L H_2SO_4.The maximum absorption ofion-associate compound exhioits at 85 nm and the molar absorptivity is7.5×1.0~5 L.mol~(-1).cm~(-1)for niobium.The new method has been applied tothe determination of microamounts niobium in silicate rock,when niobiumcontent is at the level of 8×10~(-3)%,with the relative standard deviationof about 3%.     

Novel structure-defined chiral bis(oxazolinyl)thiophenes for Ru-catalyzed asymmetric cyclopropanation

The novel structures of sulfur-containing chiral bis(oxazoline) compounds which have been synthesized have been determined by X-ray crystal diffraction analyses. A high enantioselectivity (ee >99%) in the asymmetric cyclopropanation of diphenylethene with diazoester using the bis(oxazoline)-Ru(II) catalyst was obtained.     

A novel and efficient ionic liquid supported synthesis of oligosaccharides

A novel and efficient ionic liquid supported synthesis of oligosaccharides with a general protocol of coupling and purification is described. The method represents an attractive alternative to the classical solid- and fluorous-phase synthesis strategies and combines the advantage of performing homogeneous chemistry on a relatively large scale while avoiding large excesses of reagents.     

The Photopolymerization Kinetics of Acryl amide Sensitized with Toluidine Blue-Alcoholamine Induced by He-Ne Laser

Toluidine blue(TB) is a good sensitizer for the polymerization of acrylnmide(AM) induced by He-Ne laser. With TB as a sensitizer and various alcoholamine as donors, the photoredox of TB and the polymerization kinetics of AM induced by He-Ne laser were investigated. It was found that either for the photoredox of TB or for the polymerization of AM, the activity of alcoholamine increases in the order of EOA相似文献   

THE STRUCTURAL BASIS OF THE POOR FIBRIN SPECIFICITY OF UROKINASE(Ⅰ)——KNOWLEDGE-BASED PREDICTION OF KRINGLE STRUCTURES OF UROKINASE AND ITS RELATED PROTEINS

The Kringle-1 structure of plasminogen (PGK-1), the Kringle-2 structure of tissue plasminogen activator (PAK-2) and the Kringle structure of prourokinase (UKK) has been modeled on the basis of the three-dimensional structure of Kringle-1 of prothrombin (PTK-1) at 2.8 resolution. The predicted three-dimensional structure of these Kringles shows that the binding site of PGK-1 is characterized by an apparent dipolar site, the polar parts of which are separated by a hydrophobic region. PAK-2 possesses the anionic center but has not a cationic binding center which might be provided by a guanidinium group from Arg-69 located adjacent to the Arg-71 position. UKK possesses neither the anionic binding center nor the cationic center which are probably the main reason for the poor fibrin specificity of urokinase.     

Ultrathin polymer film formation by collision-induced cross-linking of adsorbed organic molecules with hyperthermal protons

A new synthetic approach for the formation of ultrathin polymer films with customizable properties was developed. In this approach, the kinematic nature of proton collisions with simple organic molecules condensed on a substrate is exploited to break C-H bonds preferentially. The subsequent recombination of carbon radicals gives a cross-linked polymer thin film, and the selectivity of C-H cleavage preserves the chemical functionalities of the precursor molecules. The nature and validity of the method are exemplified with theoretical results from ab initio molecular dynamics calculations and experimental evidence from a variety of characterization techniques. Its applicability is demonstrated by the synthesis of ultrathin polymer films with precursor molecules such as dotriacontane, docosanoic acid, poly(acrylic acid) oligomer, and polyisoprene. The approach is fundamentally different from conventional chemical synthesis as it involves an unusual mix of physical and chemical processes including charge exchange, projectile penetration, kinematics, collision-induced dissociation, inelastic energy transfer, chain transfer, and chain cross-linking.     

Orbital Configuration of the Valence Electrons, Ligand Field Symmetry, and Manganese Oxidation States of the Photosynthetic Water Oxidizing Complex: Analysis of the S(2) State Multiline EPR Signals

A theoretical framework is presented for analysis of all three "multiline" EPR spectra (MLS) arising from the tetramanganese (Mn(4)) cluster in the S(2) oxidation state of the photosynthetic water oxidizing complex (WOC). Accurate simulations are presented which include anisotropy of the g and (four) (55)Mn hyperfine tensors, chosen according to a database of (55)Mn(III) and (55)Mn(IV) hyperfine tensors obtained previously using unbiased least-squares spectral fitting routines. In view of the large (30%) anisotropy common to Mn(III) hyperfine tensors in all complexes, previous MLS simulations which have assumed isotropic hyperfine constants have required physically unrealistic parameters. A simple model is found which offers good simulations of both the native "19-21-line" MLS and the "26-line" NH(3)-bound form of the MLS. Both a dimer-of-dimers and distorted-trigonal magnetic models are examined to describe the symmetry of the Heisenberg exchange interactions within the Mn(4) cluster and thus define the initial electronic basis states of the cluster. The effect of rhombic symmetry distortions is explicitly considered. Both magnetic models correspond to one of several possible structural models for the Mn(4) cluster proposed independently from Mn EXAFS studies. Simulated MLS were constructed for each of the eight (or seven) doublet states of the Mn(4) cluster in the WOC for the two viable oxidation models (3Mn(III)-1Mn(IV) or 3Mn(IV)-1Mn(III)), and using a wide range of axial Mn hyperfine tensors, with either coaxial or orthogonal tensor alignments. We find accurate simulations using the 3Mn(III)-1Mn(IV) oxidation model. In the dimer-of-dimers coupling model, the spin state conversion between two doublet states |S(12),S(34),S(T)|(7)/(2),4,(1)/(2)> and |(7)/(2),3,(1)/(2)> is found to explain the large (25%) contraction in the hyperfine splitting observed upon conversion from the native MLS to the NH(3)-bound MLS. Stabilization of this excited state as the new ground state is caused by change in the intermanganese exchange coupling, without appreciable change in the intrinsic hyperfine tensors. The lack of good simulations of the Ca(2+)-depleted MLS suggests that Ca(2+)-depletion changes both Mn ligation and intermanganese exchange coupling. The 3Mn(IV)-1Mn(III) oxidation model is disfavored because only approximate simulations could be found for the native MLS and no agreement with the NH(3)-bound MLS was obtained. The scalar part of the hyperfine tensors for both Mn(III) and Mn(IV) ions were found to approximate (+/-5%) the values for the dimanganese(III,IV) catalase enzyme, suggesting similar overall ligand types. However, the large (30%) anisotropic part of the Mn(III) hyperfine interaction is opposite in sign to that found in all tetragonally extended six-coordinate Mn(III) ions (i.e., the usual Jahn-Teller splitting). The distribution of spin density from the high-spin d(4) electron configuration of each Mn(III) ion corresponds to a flattened (oblate) ellipsoid. This electronic distribution is favored in five-coordinate ligand fields having trigonally compressed bipyramidal geometry, but it could also arise, in principle, in strained six-coordinate ligand fields having tetragonally compressed geometry, i.e. [Mn(2)(&mgr;-O)](4+) (reverse Jahn-Teller distortion). The resulting valence electronic configurations are described as e'(2)e"(2) and (d(pi))(3)(d(x)()()2(-)(y)()()2)(1), respectively, in contrast to the (d(pi))(3)(d(z)()()2)(1) configuration common to unstrained six-coordinate tetragonally-extended Mn(III) ions, such as found in the [Mn(2)(&mgr;-O)(2)](3+) core in several synthetic dimers and catalase. Both of the former geometries predict strongly oxidizing Mn(III) ions, thereby suggesting a structural basis for the oxidative reactivity of the Mn(4) cluster in the WOC. The magnetic model needed to explain the MLS is not readily reconciled with the simplest structural and electronic models deduced from EXAFS studies of the WOC.     

Studies on the properties of ionic liquid EMIInCl4

This paper reports that an ionic liquid (IL) has been prepared by directly mixing InCl₃ and 1-methyl-3-ethylimidazolium chloride (EMIC) with molar ratio 1/1 under dry argon atmosphere. The densities, and surface tension of the pure IL were determined at temperature range of 293.15 to 343.15 ± 0.1 K. The volumetric properties and the properties of surface for ionic liquid based on group III were discussed by Glasser's theory and Yang's interstice model.     

A Novel, Simple and Efficient Synthesis of Ferrocenyl Enones and Alkynols

Propargylic alcohols are versatile precursors to many organic molecules including natural products and pharmaceutical compounds.[1] In our continuing interest in the development of practical methods for synthesis of ferrocene derivatives, we decided to investigate the efficiencies of ferrocenylacetylene addition to aromatic aldehydes under t-BuOKcatalyzed condition.[2] Interestingly, we found that the usually reliable coupling reaction between terminal alkyne of type 1 and aromatic aldehydes of type 2 does not furnish the expected propargylic alcohols, but that the isomeric aryl enones 3are found in high yield and very short reaction time (10～20 min). This provided a promising protocol for preparation of ferrocenyl chalcones in a practical, economical and mild sense compared with the traditional method. To the best of our knowledge, this unusual reaction was first observed for the addition of ferrocenylacetylene to aldehyde in a base-catalyzed manner (Eq. 1).     

KEADA: Identifying Key Classes in Software Systems Using Dynamic Analysis and Entropy-Based Metrics

Software maintenance is indispensable in the software development process. Developers need to spend a lot of time and energy to understand the software when maintaining the software, which increases the difficulty of software maintenance. It is a feasible method to understand the software through the key classes of the software. Identifying the key classes of the software can help developers understand the software more quickly. Existing techniques on key class identification mainly use static analysis techniques to extract software structure information. Such structure information may contain redundant relationships that may not exist when the software runs and ignores the actual interaction times between classes. In this paper, we propose an approach based on dynamic analysis and entropy-based metrics to identify key classes in the Java GUI software system, called KEADA (identifying KEy clAsses based on Dynamic Analysis and entropy-based metrics). First, KEADA extracts software structure information by recording the calling relationship between classes during the software running process; such structure information takes into account the actual interaction of classes. Second, KEADA represents the structure information as a weighted directed network and further calculates the importance of each node using an entropy-based metric OSE (One-order Structural Entropy). Third, KEADA ranks classes in descending order according to their OSE values and selects a small number of classes as the key class candidates. In order to verify the effectiveness of our approach, we conducted experiments on three Java GUI software systems and compared them with seven state-of-the-art approaches. We used the Friedman test to evaluate all approaches, and the results demonstrate that our approach performs best in all software systems.