Oxidation of Stereo‐regular Poly(styrene‐co‐4‐methylstyrene) by Cobalt(II) Acetate Tetrahydrate/Sodium Bromide Catalyst

Chemical modification on the stereo‐regular poly(styrene‐co‐4‐methylstyrene) (sPS‐PMS) was attempted in this study. Metallocene copolymerization of styrene (St) and 4‐methylstyrene (MSt) was performed by using η⁵‐pentamethylcyclopentadienyl‐titanium(IV)tributoxide (Cp*Ti(OBu)₃)/methylaluminoxane (MAO)/tri‐iso‐butylaluminum (TIBA) catalyst in the bulk state. Cobalt(II) catalyst was then applied to oxidize the benzylic methyl group on the MSt units of the resulting sPS‐PMS copolymer. Both aldehyde and carboxylic acid in the oxidized products were resolved by the FTIR and ¹H NMR. The oxidized sPS‐PMSs exhibit a low and a high‐temperature T_g and T_m corresponding to the transitions in the amorphous and the crystalline regions. Hydrogen‐bond and polar interactions between the aldehyde and carboxylic acids tend to interrupt the regular chain packing of the oxidized sPS‐PMS, resulting in the lowering of T_m with oxidation level. The oxidized sPS‐PMS showed better adhesion to glass fiber than pure sPS‐PMS copolymer as evaluated from the respective SEM fractured micrographs.     

钴膦簇合物的催化环丙烷化反应

本文首次利用碳基钴簇合物ＰｈＰＣｏ_３（ＣＯ）_９催化剂，在常压和－２０℃－０℃，用苯乙烯和重氮乙酸乙酯进行环丙烷化反应，合成了菊酸酯，重氮乙酸乙酯可全部转化，酯的选择性可达８５％。产物经减压分馏后，由ＩＲ和￣１ＨＮＭＲ分析，确证了产物为菊酸酯，表明了羰基钴簇合物对苯乙烯的环丙烷化反应有良好的催化性能，为四面体异核簇合物用于不对称催化反应打下了基础。     

尼龙1010／尼龙6共聚物的表观相图研究

采用显微熔点法和ＤＳＣ测定了尼龙１０１０／尼龙６共聚物的表观相图；分析了投料比与链节结构单元含量的关系。最低熔点时尼龙１０１０／尼龙６的理论重量投料比为６０／４０，摩尔比为３３．３／６６．７，实验结果与此相近。     

Novel photopolymerizable biodegradable triblock polymers for tissue engineering scaffolds: synthesis and characterization

For use in micro-patterned scaffolds in tissue engineering, novel diacrylated triblock macromers (PLA-b-PCL-b-PLA, PGA-b-PCL-b-PGA and PCL-b-PEO-b-PCL) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). All diacrylated polymers were designed as triblock copolymers and involved biodegradable blocks of relatively non-polar epsilon-caprolactone (CL) and polar monomers such as glycolide (GA), lactide (LA) or ethylene oxide (EO). All triblock polymers were prepared in molecular weights of a few kilo daltons via the anionic ring-opening polymerization (ROP) of the corresponding lactide, glycolide or caprolactone using stannous octoate [Sn(Oct)(2)] as catalyst. The polymers had low polydispersity indices, ranging from 1.23 to 1.56. Biodegradable polymeric networks were prepared with conversions of 72-84% via photopolymerization of the triblock diacrylated polymers with 2,2-dimethoxy-2-phenylacetophenone (DMPA) as photoinitiator. PLA-b-PCL-b-PLA copolymers crumbled easily and were not suitable for micro-patterning. PGA-b-PCL-b-PGA copolymers had higher water contact angles than PCL-b-PEO-b-PCL and were also cytocompatible with Fibroblasts 3T3.     

Unexpected formation of the novel fluorinated diazenes

Fluoroalkanesulfonyl azides reacted with morpholine giving unexpectedly N-fluoroalkanesulfonyl-N-morpholino diazenes, which were fully characterized by using spectral methods and X-ray diffraction analysis.     

Supramolecular assemblies of a naturally derived sophorolipid

Acidic sophorolipid (SL) molecules derived from yeasts represent a novel type of asymmetrical bolaamphiphiles due to their unique structural features that include an asymmetrical polar head size (disaccharide vs COOH), a kinked hydrophobic core (cis-9-octadecenoic chain), and a non-amide polar-nonpolar linkage. Light microscopy, small- and wide-angle X-ray scattering, FT-IR spectroscopy, and dynamic laser light scattering were used to investigate the supramolecular structures of the self-assembled aggregates of SL molecules at different pH values. In acidic conditions (pH < 5.5), giant twisted and helical ribbons of 5-11 microm width and several hundreds of micrometers length were observed for the first time. Increase in solution pH values slowed ribbon formation, decreased ribbon yield, and increased the helicity and entanglements of the giant ribbons. An interdigitated lamellar packing model of acidic SL-COOH molecules with a long period of 2.78 nm, stabilized by both the strong hydrophobic association between the cis-9-octadecenoic chains and strong disaccharide-disaccharide hydrogen bonding, is proposed. The neutralization of SL-COOH in water to SL-COONa produced clear solutions with the formation of short-range ordered aggregates. At concentrations below 1.0 mg/mL, the size of self-assembled aggregates increased as the concentration increased. At concentrations above 1.0 mg/mL, narrowly distributed micellar aggregates with a constant hydrodynamic radius (R(h)) of about 100 nm are formed. The large micelles show strong angular dependence with the fast mode appearing at scattering angle theta >/= 60 degrees.     

Two types of intramolecular addition of an Al-N multiple-bonded monomer LAlNAr' arising from the reaction of LAl with N3Ar' (L = HC[(CMe)(NAr)]2, Ar' = 2,6-Ar2C6H3, Ar = 2,6-iPr2C6H3)

The reaction of beta-diketiminated aluminum(I) monomer LAl with a large bulky azide N3Ar' (L = HC(CMeNAr)2, Ar' = 2,6-Ar2C6H3, Ar = 2,6-iPr2C6H3) in the temperature range from -78 degrees C to room temperature affords two different isomers 2 and 3, which have been characterized by spectroscopic and X-ray structural analyses, as well as elemental analysis. The variable-temperature 1H NMR kinetic studies of this reaction indicate the existence of the monomer LAlNAr' (1) at low temperature and the thermal stability of the compounds increases in the order of 1 < 2 < 3.     

Inorganic—Organic Hybrid 18—Molybdodiphosphate Nanoparticles Bullk—modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic‐organic hybrid 18‐molybdodiphosphate nanoparticles ([(C₄H₉)₄N]₆P₂Mo₁₈Q₆₂·4H₂O) was firstly used as a bulk‐modifier to fabricate a three‐dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square‐wave voltammetry. The hybrid 18‐molybdodiphosphate nanoparticles bulk‐modified CPE (MNP‐CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP‐CPE over the traditional polyoxometalates‐modified electrodes are their excellent reproducibility of surface‐renewal and high stability owing to the insolubility of the hybrid 18‐molybdodiphosphate nanoparticles.     

Di‐2‐pyridyl ketone N4,N4‐(butane‐1,4‐diyl)thiosemicarbazone

The title compound, C₁₆H₁₇N₅S, is in the thione form and crystallizes with two independent mol­ecules in the asymmetric unit. In both mol­ecules, the penta­methyl­ene­imine five‐membered ring adopts an envelope conformation, and in one of the molecules this ring shows positional disorder. The thione S and hydrazine N atoms are in the Z configuration with respect to the C—N bond.     

4‘,7—二甲氧基莰非醇的合成

Ｓｉｍｍｏｎｄｓ等报道异戊烯基化的查耳酮和黄烷酮对昆虫具有拒食活性［１］，Ｅｃｈｅｖｅｒｒｉ等发现，从植物Ｐａｓｓｉｆｌｏｒａｆｏｅｔｉｄａ树脂中分离到的４，７－二甲氧基莰非醇（１）在很低的浓度下（４０μｇ／ｇ）对昆虫Ｄｉｏｎｅｊｕｎｏ的幼虫也具有...