Oxidation of Styrene with Molecular Oxygen in Supercritical CO2

The oxidation of styrene with molecular oxygen catalyzed by PdCl2 CuCl2 has been investigated in supercritical CO2 with a batch reactor. The oxidative system of styrene contains four components at the beginning and seven components during the reaction. The critical temperature, critical pressure, and critical density at different conversions are determined by using a high-pressure view cell. The effect of phase behavior on the conversion and selectivity were studied. Experimental results showed that the critical parameters of the reaction mixture at fixed initial molar ratio changed with the conversion of reactant. The conversion of styrene reached maximum near the critical density of the reaction mixture. Product selectivity also varied with density of reaction mixture and could be tuned to some degree.     

Strong Attraction of Caffeine to the Mercurous Dumbbell in the Salt [Hg2(Caf)2](ClO4)2(H2O)2

Colourless single crystals of the caffeine adduct of mercurous perchlorate dihydrate, [Hg₂(Caf)₂](ClO₄)₂(H₂O)₂, were grown from aqueous solutions of mercurous perchlorate and caffeine by isothermal evaporation at ambient temperature. The crystal structure (monoclinic, P2₁/n, Z = 4, a = 1628.0(2), b = 780.4(1), c = 2229.6(3) pm, β = 99.84(1)°, R₁(all data) = 0.0894) contains [trans‐Caf‐Hg‐Hg‐Caf]²⁺ cations with a Hg‐Hg distance of 250.88(6) pm, Hg‐N (bond) distances of 214.4(6) and 215.1(6) pm and Hg‐Hg‐N angles of 176.9(2) and 165.1(2)°, respectively. These cations are attached via weak Hg‐O contacts to dimers which are further arranged to leave large channels into which one crystal water molecule is included. The second water molecule and the two perchlorate anions are weakly attracted to one Hg atom.     

Morphology and thermal properties of a PC/PE blend with reactive compatibilization

Reactive compatibilization of immiscible polymers is becoming increasingly important and hence a representative study of a polycarbonate/high density polyethylene (PC/HDPE) system is the focus of this paper. A grafted copolymer PC‐graft‐ethylene‐co‐acrylic acid (PC‐graft‐EAA) was generated as a compatibilizer in situ during processing operation by ester and acid reaction between PC and ethylene‐acrylic acid (EAA) in the presence of the catalyst dibutyl tin oxide (DBTO). As the polyethylene (PE) matrix does not play any part during the synthesis of the copolymer and since PC and EAA are also immiscible, to simplify the system, the influence of this copolymer formation at the interface between PC and EAA on rheological properties, phase morphology, and crystallization behavior for EAA/PC binary blends was first studied. The equilibrium torque increased with the DBTO content increasing in EAA/PC blends on Haake torque rheometer, indicating the in situ formation of the graft copolymer. Scanning electron microscopy (SEM) studies of cryogenically fractured surfaces showed a significant change at the distribution and dispersion of the dispersed phase in the presence of DBTO, compared with the EAA/PC blend without the catalyst. Differential scanning calorimetry (DSC) studies suggested that the heat of fusion of the EAA phase in PC/EAA blends with or without DBTO reduced with the formation of the copolymer compared with pure EAA. Then morphological studies and crystallization behavior of the uncompatibilized and compatibilized blends of PC/PE were studied as functions of EAA phase concentration and DBTO content. Morphological observations in PC/PE blends also revealed that on increasing the EAA content or adding the catalyst DBTO, the number of microvoids was reduced and the interface was intensive as compared to the uncompatibilized PC/PE blends. Crystallization studies indicated that PE crystallized at its bulk crystallization temperature. The degree of crystallinity of PE phase in PC/PE/EAA blends was also reduced with the addition of EAA and DBTO compared to the uncompatibilized blends of PC/PE, indicating the decrease in the degree of crystallinity was more in the presence of PC‐graft‐EAA. Copyright © 2007 John Wiley & Sons, Ltd.     

Determination of Total Reduced Thiol Levels in Plasma Using a Bromide Substituted Quinone

The exploitation of 2‐bromo‐1,4‐naphthoquinone (NQBr) as a selective redox label for the determination of reduced thiol functionalities (RSH) has been investigated. The system is selective for RSH functionality, giving distinct voltammetric signals for glutathione and cysteine but can also be adapted for broad spectrum thiol detection. Ion chromatographic protocols based on conductimetric detection enable total RSH analysis (protein and monomolecular moieties) within human plasma. Bromide released through the reaction can be easily quantified and integrated within normal IC measurements. The efficacy of the approach has been assessed and the response validated through comparison with the standard colorimetric technique.     

A new approach to the synthesis of α-chlorocycloalkanones

α-Chlorocycloalkanones(Ⅳ) were synthesized from cycloalkanones via potassiumα-oxocycloalkylsulfonates(Ⅱ).A two-step mechanism was proposed to explain the formation ofⅣfromⅡ.     

A SAPO-11 Silicoaluminophosphate Molecular Sieve with Stable Crystal Structure

A SAPO-11 silicoaluminophosphate molecular sieve with stable crystal structure was synthesized for the first time. After removing template by calcination, its crystal space group still retains Icm2 which the as-synthesized has. The catalyst deriving from the present SAPO-I 1 materials shows higher isomerization selectivity and higher paraffin hydroisomerization yield than those reported elsewhere.     

表面修饰二氧化锡纳米微晶的制备与表征

制备了硅烷偶联剂KH-570表面修饰的SnO2纳米微晶，通过FT-IR、XPS、TEM和TG-DTA对其结构和表面特性进行表征和研究. FT-IR和XPS分析结果确证了KH-570与SnO2表面是以化学键合或物理吸附方式相结合,粒子表面存在酯基等有机官能团的红外吸收特征；观测到KH-570中Si原子的Si2s和Si2p谱线. TEM分析表明，表面修饰反应增强了SnO2纳米微晶的疏水性和分散性.由XPS和TG的实测数据探讨了纳米粒子具有较低包覆量的可能原因.     

Models of steroid binding based on the minimum deviation of structurally assigned 13C NMR spectra analysis (MiDSASA)

This paper develops a quantitative k-nearest neighbors modeling technique. The technique is used to demonstrate that a compound's biological binding activity to a receptor can be calculated from the minimum of the square root of the sum of squared deviations (SSSD) of a structurally assigned chemical shift on a template between the unknown compound to be predicted and a set of known compounds with known activities. When building models of biological activity, nonlinear relationships are built into the input training data. If a model is developed by selecting only compounds with minimum structurally assigned chemical shift deviations from the unknown compound, some of the nonlinear relationships can be removed. The smaller the total chemical shift deviation between a compound with known activity and another compound with unknown activity, the more likely it will have similar biological, chemical, and physical properties. This means that a model can be produced without rigorous statistics or neural networks. This technique is similar to structure-activity relationship (SAR) modeling, but instead of relying on substructure fragments to produce a model, this new model is based on minimum chemical shift differences on those substructure fragments. We refer to this method as minimum deviation of structurally assigned spectra analysis (MiDSASA) modeling. Modeling by the minimum deviation concept can be applied to other chemoinformatic data analyses such as metabolite concentrations in metabolic pathways for metabolomics research. A MiDSASA template model for 30 steroids binding the corticosterone binding globulin based on the activity factors of the two nearest compounds had a correlation of 0.88. A MiDSASA template model for 50 steroids binding the aromatse enzyme based on the average activity of the four nearest compounds had a correlation of 0.71.     

Structure and Two-photon Excited Blue Fluorescence of an Asymmetrical Substituted Stilbene

In common fluorescence process, molecular excitation is caused by the absorption of at least a single photon with shorter wavelength. When certain laser is used as the pump source, some compounds can be excited by simultaneous absorption of at least two photons and then the emission of up-converted fluorescence may occur. This process is called two-photon excited fluorescence (TPEF)1,2. Because of several advantages of TPEF, including intrinsic high three-dimensional resolution and the p…     

[Co(3,3-tri)(men)Cl][ZnCl_4]和[Co(3,3-tri)(cmen)Cl][ZnCl_4]两体系配合物的合成及两经式异构体的晶体结构

分别合成了 [Co(3, 3-tri)(men)Cl][ZnCl4]、[Co(3, 3-tri)(cmen)Cl][ZnCl4] (3, 3-tri = N-(3-胺基丙基)-1, 3-丙二胺,men = N-甲基乙二胺,cmen = 1, 2-二胺基-丙烷) 2体系的部分配合物异构体,用单晶 X-射线衍射分析方法解析了2异构体的晶体结构。其中 [Co(3, 3-tri)(men)Cl][ZnCl4] 体系的一异构体Ⅰ的化学简式为 CoCl(C9H27N5)ZnCl4,晶体属正交晶系,空间群 Pca21,a = 16.788(2),b = 7.964(1),c = 14.416(2) 牛琕 =1927.3(4) ?,Dc = 1.747 g/cm3,Z = 4,F(000) = 1032,Mr = 506.91,R = 0.0352,wR =0.0935;[Co(3, 3-tri)(cmen)Cl]2+ 体系的一异构体Ⅱ的化学简式为 CoCl(C9H27N5)ZnCl4稨2O, 晶体属三斜晶系,空间群 P ,a = 9.511(3), b = 9.972(3),c = 11.694(3) 牛琣 = 68.367(5),b = 85.196(6),?= 86.580(5),V = 1026.9(5)?3,Dc = 1.698 g/cm3,Z = 2,F(000) = 536,Mr = 524.92,R = 0.0494,wR = 0.1180。两异构体中 Co3+ 为六配位,晶胞中对映体比例均为1:1。在配合物异构体Ⅰ和Ⅱ中,三元胺以经式排布,三元胺配体(3, 3-tri)仲胺上的氢相对于Cl分别处于顺位(syn-)和反位(anti-);二元胺配体氮(或邻位碳)取代的胺基氮原子(N*)与三元胺配体中的仲氮原子分别处于对位(trans(N*))和邻位(cis(N*))。