Structure and Magnetic Properties of a Novel Two‐Dimensional Complex from 1, 3, 5‐Benzenetricarboxylate and Neodymium(III) — {[Nd(1, 3, 5‐benzenetricarboxylate)(H2O)4] · H2O}n

A unique neodymium(III) complex, {[Nd(BTC)(H₂O)₄] · H₂O}_n (BTC = 1, 3, 5‐benzenetricarboxylate), was obtained from the reaction between Nd(ClO₄)₃ · xH₂O and Na₃BTC. Coordination bonds, hydrogen bonds, and π‐π stacking form a supramolecular structure with a novel, two‐dimensional framework. The temperature‐dependent magnetic susceptibilities were analyzed by the Curie‐Weiss law; the following values were found C = 1.32, θ = —18.3 K, respectively.     

气相分子吸收光谱法测定地下水中亚硝酸盐氮、氨氮、硝酸盐氮

采用气相分子吸收光谱法测定地下水中的亚硝酸盐氮(NO2^-)、氨氮(NH4^+)、硝酸盐氮(NO3^-)。考察NO2^-,NH4^+和NO3^-测定时的相互干扰,并给出了相应的消除方法。研究结果表明,测定NO2^-时,NH4^+和NO3^-无干扰;NO2^-对测定NH4^+和NO3^-产生干扰,可分别采用分段法和加入2滴10%氨基磺酸溶液的方法消除干扰;对于不含NO2^-或NO2-含量不高的地下水样品,可简化操作步骤直接测定NO3^-。该方法测定结果的相对标准偏差为0.73%~2.74%(n=12),样品加标回收率为97.67%~100.28%。所用检测仪器具有流动注射、自动进样及在线绘制标准曲线的功能,简化了标准方法中的样品前处理过程,减少了样品的损失,实现了自动化分析,大幅提高了检测结果的准确度和工作效率。     

A self-assembly/disassembly two-photo ratiometric fluorogenic probe for bacteria imaging

A fluorogenic probe for bacteria imaging was reported. The binding with anionic bacterial surfaces disassembled the self-assembly probe to turn-on the fluorescence and shift pyrene monomer/excimer ratiometric signals.     

Structural and Magnetic Study of N2, NO,NO2, and SO2 Adsorbed within a Flexible Single‐Crystal Adsorbent of [Rh2(bza)4(pyz)]n

The crystalline one‐dimensional compound, [Rh^II₂(bza)₄(pyz)]_n ( 1 ) (bza=benzoate, pyz=pyrazine) demonstrates gas adsorbency for N₂, NO, NO₂, and SO₂. These gas‐inclusion crystal structures were characterized by single‐crystal X‐ray crystallography as 1 ?1.5 N₂ (298 K), 1 ?2.5 N₂ (90 K), and 1 ?1.95 NO (90 K) under forcible adsorption conditions and 1 ?2 NO₂ (90 K) and 1 ?3 SO₂ (90 K) under ambient pressure. Crystal‐phase transition to the P space group that correlates with gas adsorption was observed under N₂, NO, and SO₂ conditions. The C2/c space group was observed under NO₂ conditions without phase transition. All adsorbed gases were stabilized by the host lattice. In the N₂, NO, and SO₂ inclusion crystals at 90 K, short interatomic distances within van der Waals contacts were found among the neighboring guest molecules along the channel. The adsorbed NO molecules generated the trans‐NO???NO associated dimer with short intermolecular contacts but without the conventional chemical bond. The magnetic susceptibility of the NO inclusion crystal indicated antiferromagnetic interaction between the NO molecules and paramagnetism arising from the NO monomer. The NO₂ inclusion crystal structure revealed that the gas molecules were adsorbed in the crystal in dimeric form, N₂O₄.     

Synthesis and Kinetic Study on the Chromium(III) Complex [Cr(ASA)(en)2]Cl·2H2O

In order to explore the transfer mechanism of chromium(III) in mammals, a novel complex [Cr(ASA)(en)₂]Cl· 2H₂O, bis(ethylenediamine‐ κ ² N,N′)(4‐aminosalicylic acid‐ κ ² O,O′) chromium(III) monochloride dihydrate was synthesized (4‐aminosalicylic acid=H₂ASA, ethylenediamine=en). The crystal structure belongs to orthorhombic system with the space group P2₁2₁2₁ by means of X‐ray diffraction. The characteristic for transfer of Cr³⁺ from the compound to the low‐molecular‐mass chelator EDTA and the iron‐binding protein apoovotransferrin (apoOTf) was followed by UV‐visible (UV‐Vis) and fluorescence spectra in 0.01 mol·L^?1 Hepes at pH 7.4. The second order rate constants were calculated. Those spectra in conjunction were used to obtain more accurate information about the interaction of chromium complex with apoOTf. The experimental results indicate that Cr³⁺ can be transferred from the complex to apoOTf with the retention of the 4‐aminosalicylic acid acting as a synergistic anion.     

Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Effect of dimethylaminoethyl methacrylate on the graft copolymerization of ethyl acrylate onto hydroxypropyl methylcellulose in aqueous medium

Graft copolymerization of an ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) monomer mixture onto water-soluble hydroxypropyl methylcellulose was investigated with potassium persulfate (KPS) as the initiator in an aqueous medium. The effects of introducing DMAEMA onto the graft copolymerization and the properties of the resulting latex that was produced were studied systematically. The optimum conditions for the graft copolymerization in terms of percentage of grafting and grafting efficiency were determined. The graft copolymer was characterized by Fourier transform infrared spectra, elemental analyses, nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering methods. The results suggest that the introduction of the DMAEMA monomer clearly accelerates the initial rate of the graft copolymerization, whereas the grafting parameters decrease significantly with increasing amounts of DMAEMA. These results can be attributed to the relatively large size of the DMAEMA molecule, its redox reaction with KPS, its hydrophilicity in water, and its chain transfer effect. The equilibrium humidity adsorption behavior and acid solubility of graft the copolymer films were also studied.     

Effect of the Secondary Reduction on the Enantioselectivity and Function of Additives in the Chiral Oxazaborolidine‐Catalyzed Asymmetric Borane Reduction of Ketones

The secondary reduction in the direct and oxazaborolidine‐catalyzed asymmetric borane reduction of ketones was investigated by the use of GC/MS tracing titration and control experiments. The results indicate that the secondary reduction affects the enantioselectivity only in noncoordinated solvents at low temperature and not under the usual catalytic reduction conditions because the intermediate alkoxyborane is unstable and quickly converts to borane and dialkoxyborane. The function of an alcohol additive in the asymmetric borane reduction of ketones is to consume excess borane in the reduction system thus inhibiting noncatalytic reduction, which leads to increased enantioselectivity in the catalytic reduction.     

具有三维交叉孔道的新型亚磷酸锌的合成与结构

本文报道了一种新型三维亚磷酸锌[HO(CH₂)₂NH₃]₂•[Zn₃(HPO₃)₄]的合成和晶体结构。在它的结构中，ZnO₄和HPO₃严格按照顶点连接的方式交替相连。骨架结构存在两个沿着不同方向无限延伸的由ZnO₄和HPO₃组成的四元环链，在[0 1 0]、[0 4 15]和[0 -4 15]三个方向形成了三个交叉8元环孔道，有机胺阳离子起着平衡电荷和稳定骨架的结构。它的晶体数据为：[HO(CH₂)₂NH₃]₂•[Zn₃(HPO₃)₄],M=640.21, 正交晶系, Fdd2空间群, a=2.8528, b=0.8426, c=1.6159nm, Z=8, V=3.884nm³, R₁=0.0219, wR₂=0.0544。     

Preparation of spherical spinel LiMn2O4 cathode material for lithium ion batteries

A novel process is proposed for synthesis of spinel LiMn₂O₄ with spherical particles from the inexpensive materials MnSO₄, NH₄HCO₃, and NH₃H₂O. The successful preparation started with carefully controlled crystallization of MnCO₃, leading to particles of spherical shape and high tap density. Thermal decomposition of MnCO₃ was investigated by both DTA and TG analysis and XRD analysis of products. A precursor of product, spherical Mn₂O₃, was then obtained by heating MnCO₃. A mixture of Mn₂O₃ and Li₂CO₃ was then sintered to produce LiMn₂O₄ with retention of spherical particle shape. It was found that if lithium was in stoichiometric excess of 5% in the calcination of spinel LiMn₂O₄, the product had the largest initial specific capacity. In this way spherical particles of spinel LiMn₂O₄ were of excellent fluidity and dispersivity, and had a tap density as high as 1.9 g cm^–3 and an initial discharge capacity reaching 125 mAh g^–1. When surface-doped with cobalt in a 0.01 Co/Mn mole ratio, although the initial discharge capacity decreased to 118 mAh g^–1, the 100th cycle capacity retention reached 92.4% at 25°C. Even at 55°C the initial discharge capacity reached 113 mAh g^–1 and the 50th cycle capacity retention was in excess of 83.8%.