Optical properties of hydrogenated amorphous silicon films doped with fluorinated gases

Doped amorphous silicon films were prepared by plasma-enhanced chemical vapour deposition of silane and hydrogen mixtures, using phosphorus pentafluoride (PF₅) and boron trifluoride (BF₃) as dopant precursors. The films were studied by UV-vis spectroscopy and their photo and dark conductivity were measured, the latter as a function of temperature. The optical gap of the n-type samples, doped with PF₅, diminished as the concentration of this gas in the plasma was increased. However, the optical gap of p-type samples, doped with BF₃, did not show any appreciable optical gap decrease as the concentration of BF₃ was varied from 0.04% to 4.7%. The dark conductivity of the p-type films at these extremes of the doping range were 7.6 × 10⁻¹⁰ and 3.5 × 10⁻¹ Ω⁻¹ cm⁻¹, respectively.     

Stress anisotropy induced by periodic boundary conditions

Finite size effects due to periodic boundary conditions are investigated using computer simulations in the canonical ensemble. We study liquids with densities corresponding to typical liquid coexistence densities, and temperatures between the triple and critical points. The components of the pressure tensor are computed in order to analyze the finite size effects arising from the size and geometry of the simulation box. Two different box geometries are considered: cubic and parallelepiped. As expected the pressure tensor is isotropic in cubic boxes, but it becomes anisotropic for small noncubic boxes. We argue this is the origin of the anomalous behavior observed recently in the computation of the surface tension of liquid-vapor interfaces. Otherwise, we find that the bulk pressure is sensitive to the box geometry when small simulation boxes are considered. These observations are general and independent of the model liquid considered. We report results for liquids interacting through short range forces, square well and Lennard-Jones, and also long range Coulombic interactions. The effect that small surface areas have on the surface tension is discussed, and some preliminary results at the liquid vapor-interface for the square well potential are given.     

Acetamide degradation by a continuous-fed batch culture ofBacillus sphaericus

Applied Biochemistry and Biotechnology - The methanogenesis of acetamide occurs through a two-step reaction in methanogenic sludges. First, acetamide is hydrolyzed to acetate and ammonia by a...     

Oxygenation of alkane C-H bonds with methyl(trifluoromethyl)dioxirane: effect of the substituents and the solvent on the reaction rate

[Chemical reaction: See text] The mechanism of the oxygenation of alkane C-H bonds with methyl(trifluoromethyl)dioxirane (1a) is studied through the effect of the substituent and solvent on the rate of oxygenation of 2-substituted adamantanes (2). The results suggest a remarkable electron deficiency at the reacting carbon atom in the transition state leading to the regular oxygenation products. The linearity of the Hammett plot reveals that the reaction mechanism does not change within a range of 0.15-0.67 units of sigma(I). A change in the solvent does not affect the distribution of the products, indicating a through-bond transmission of the substituent effect as the origin of the deactivation of the substrate.     

Fiber transmission and generation of ultrawideband pulses by direct current modulation of semiconductor lasers and chirp-to-intensity conversion

Optical pulses generated by current modulation of semiconductor lasers are strongly frequency chirped. This effect has been considered pernicious for optical communications. We take advantage of this effect for the generation of ultrawideband microwave signals by using an optical filter to achieve chirp-to-intensity conversion. We also experimentally achieve propagation through a 20 km nonzero dispersion shifted fiber with no degradation of the signal at the receiver. Our method constitutes a prospective low-cost solution and offers integration capabilities with fiber-to-the-customer-premise systems.     

Crosslinking effects on hybrid organic–inorganic proton conducting membranes based on sulfonated polystyrene and polysiloxane

New hybrid semi‐interpenetrating proton‐conducting membranes were obtained using sulfonated polystyrene (SPS) and inorganic–organic polysiloxane phases with the aim of improving the mechanical and thermal characteristics of the pristine polymer and to study the effects of crosslinking in the latter phase in several of their properties, mainly proton conductivity. Siloxane phases were prepared using poly(dimethylsiloxane) (PDMS) and PDMS with tetraethoxysilane (TEOS) or phenyltrimethoxysilane (PTMS) as crosslinking agents. To study the crosslinking effect, membranes were prepared with different TEOS:PDMS and PTMS:PDMS mole ratios. The films obtained were characterized by FTIR, ²⁹Si‐HPDEC MAS‐NMR, ¹³C‐CP‐MAS NMR, elemental and thermal analyses. Certain properties, such as water uptake (WU), ion exchange capacity (IEC) and the state of the water, were determined. The proton conductivity was measured at different temperatures (30°C and 80°C) and relative humidities (50–95%). The water content of the hybrid membranes declined significantly, compared with the SPS membranes, depending on the nature and amount of siloxane phase added. Nonetheless, the conductivity values remained relatively high (>100 mS cm^?1 at 80°C and 95% RH) when compared to Nafion®117 presumably because of the formation of well developed proton channels, which makes them potentially promising as proton exchange membranes for fuel cells. These membranes proved to be thermally stable up to 350°C. Scanning electron microscopy (SEM) and scanning electrochemical microscopy (SECM) were used to characterize the hybrid membranes microstructures; the latter provided contrast for the conductive domains. Copyright © 2015 John Wiley & Sons, Ltd.     

Adsorption of urea onto granular activated alumina: A comparative study with granular activated carbon

ABSTRACT

This study investigated the ability of granular activated alumina to remove urea from wastewater through adsorption, and compared its performance with granular activated carbon. XRF, EDX, XRD, and TGA were used to investigate the adsorbents. The removal of urea as a function of pH value was studied. The point of zero charge for activated alumina was found to be 8.8, while that for activated carbon was found to be 7.1. The experimental data of the adsorption process were explored by fitting to different kinetic models to determine the adsorption kinetics and mechanisms. Then, the equilibrium data were examined by fitting to various two-parameter and three-parameter isotherm models. Results showed that the removal efficiency increased with the increasing pH value. The maximum removal efficiencies were 24% and 31% for granular activated alumina and granular activated carbon, respectively, at pH?=?9.0. Kinetic studies showed that adsorption of urea onto both activated alumina and activated carbon can be expressed by pseudo second order kinetics. Equilibrium studies showed that the adsorption isotherms could be expressed by the Redlich-Peterson isotherm and Temkin isotherm for activated alumina and activated carbon, respectively. Adsorbents were investigated using FTIR and SEM, and results showed the occurrence of adsorption.     

Microstructural Characterization of Diblock Copolymers Formed by Styrene and Different Methacrylic Units

FT-IR, DSC, and NMR techniques allowed the structural characterization of four copolymers formed by styrene and methacrylic units (methacrylic acid (MAA), dimethylamine ethyl methacrylate (DMAEMA), sodium methacrylate (MANa), and 1-hydroxyethyl methacrylate (HEMA). The copolymer composition was studied by Fourier transform-infrared spectroscopy (FT-IR) and nuclear magnetic resonance (NMR) spectroscopy. The thermal behavior of the block copolymers was analyzed by differential scanning calorimetry (DSC). Three of the four copolymers showed two transitions caused by changes in the polymer heat capacity (ΔCp) of each block. Diffusion-ordered spectroscopy (DOSY) experiments were used to distinguish copolymer from homopolymer mixtures. Finally, the triad-level stereosequences of styrene-methacrylic copolymers were obtained using ¹³C NMR. The results indicate that by increasing the alkyl-substituent length in the methacrylic block, the probability of syndiotactic polymerization increases.     

Marangoni stresses and surface compression rheology of surfactant solutions. Achievements and problems

In the presence of soluble surfactants, the motion of liquid surfaces involves Marangoni effects. As a consequence, the surfaces exhibit elastic responses, even frequently behaving as rigid surfaces, especially at low surfactant concentration. The Marangoni effects can be conveniently quantified introducing surface viscoelastic compression parameters that characterize the mechanical response of the surface near equilibrium. Many experimental techniques allow measuring the viscoelastic parameters. However, many difficulties are encountered during the interpretation of the surface response in the various types of hydrodynamic velocity fields involved in the different techniques. The role of adsorption and desorption energy barriers appears crucial, despite the fact that little is known yet about their values. In this short review, we will present examples illustrating the different problems.     

Selective Electrochemical Determination of Uric Acid in the Presence of Ascorbic Acid Using a Carbon Paste Electrode Modified with β‐Cyclodextrin

Uric acid (UA) was determined in the presence of ascorbic acid (AA) by using a carbon paste electrode modified superficially by a β‐cyclodextrin film (CPE/β‐CD). The surface carbon paste electrode was prepared applying a 30 cycles potential program and using a 1 M HClO₄+0.01 M β‐CD electrolytic solution. The UA and AA solutions were used to evaluate the electrode selectivity and sensitivity by cyclic voltammetric and amperometric methods. In these experiments the detection limit for UA was (4.6±0.01)×10^?6 M and the RSD calculated from the amperometric curves was 10%. From the data obtained it was possible to quantify UA in the urine and saliva samples. Selective detection of UA was improved by formation of an inclusion complex between β‐CD and UA. The results show that the CPE/β‐CD is a good candidate due to its selectivity and sensitivity in the UA determination in complex samples like the biological fluids.