Circular dichroism thermal lens microscope in the UV wavelength region (UV-CD-TLM) for chiral analysis on a microchip

We have developed a circular-dichroism thermal lens microscope for UV wavelengths (UV-CD-TLM), for the first time, to realize sensitive chiral analysis on a microchip. Quasi-continuous-wave phase modulation of a pulsed UV laser was used to generate left-circularly polarized light and right-circularly polarized light and to detect the generated TL signal amplitude and phase with a lock-in amplifier. The amplitude and phase were used to determine the concentration and chirality, respectively, of a sample. The basic principle of UV-CD-TLM for chiral analysis on a microchip was verified by measuring aqueous solutions of optically active camphorsulfonic acids (CSA). Lower limits of detection (LOD) were calculated at S/N = 2 and were 8.7 × 10⁻⁴ mol L⁻¹ (ΔA = 5.2 × 10⁻⁶ Abs.) for (+)-CSA and 8.4 × 10⁻⁴ mol L⁻¹ (ΔA = 5.0 × 10⁻⁶ Abs.) for (−)-CSA. In terms of number of molecules, LODs for UV-CD-TLM were calculated to be 8.7 fmol and 8.4 fmol, respectively. This is at least three orders of magnitude lower than previously obtained. The applicability of UV-CD-TLM for chiral analysis on a microchip was verified. Figure Sensitive chiral analysis by thermal lens microscope (TLM)     

Separation and recovery of Cm from Cm–Pu mixed oxide samples containing Am impurity

Curium was separated and recovered as an oxalate from a Cm–Pu mixed oxide which had been a ²⁴⁴Cm oxide sample prepared more than 40 years ago and the ratio of ²⁴⁴Cm to ²⁴⁰Pu was estimated to 0.2:0.8. Radiochemical analyses of the solution prepared by dissolving the Cm–Pu mixed oxide in nitric acid revealed that the oxide contained about 1 at% of ²⁴³Am impurity. To obtain high purity curium solution, plutonium and americium were removed from the solution by an anion exchange method and by chromatographic separation using tertiary pyridine resin embedded in silica beads with nitric acid/methanol mixed solution, respectively. Curium oxalate, a precursor compound of curium oxide, was prepared from the purified curium solution. 11.9 mg of Cm oxalate having some amounts of impurities, which are ²⁴³Am (5.4 at%) and ²⁴⁰Pu (0.3 at%) was obtained without Am removal procedure. Meanwhile, 12.0 mg of Cm oxalate (99.8 at% over actinides) was obtained with the procedure including Am removals. Both of the obtained Cm oxalate sample were supplied for the syntheses and measurements of the thermochemical properties of curium compounds.     

Strategy for the increasing the solid-state fluorescence intensity of pyrromethene-BF2 complexes

In this study, we attempted to increase the fluorescence quantum yield of pyrromethene-BF₂ complex (BODIPY) in the solid state by introducing bulky groups as substituents at the boron atom. Although the BF₂ complex did not exhibit any fluorescence in the solid state (Φ_f = 0.00), the B(OMe)₂, B(OPh)₂, and BPh₂ complexes did show solid-state fluorescence with quantum yields of 0.02, 0.04, and 0.22, respectively.     

An effective use of benzoic anhydride and its derivatives for the synthesis of carboxylic esters and lactones: a powerful and convenient mixed anhydride method promoted by basic catalysts

Various carboxylic esters are obtained at room temperature in excellent yields with high chemoselectivities from nearly equimolar amounts of carboxylic acids and alcohols using 2-methyl-6-nitrobenzoic anhydride with triethylamine by the promotion of a basic catalyst such as 4-(dimethylamino)pyridine. A variety of lactones are also prepared in high yields at room temperature from the corresponding omega-hydroxycarboxylic acids with use of 2-methyl-6-nitrobenzoic anhydride in the presence of 4-(dimethylamino)pyridine. A similar reaction occurs with triethylamine when using a catalytic amount of 4-(dimethylamino)pyridine 1-oxide as an effective promoter for the intramolecular condensation reaction. These methods are successfully applied to the synthesis of erythro-aleuritic acid lactone and an eight-membered-ring lactone moiety of octalactins A and B. The efficiency of the cyclizations is compared to those of other reported lactonizations.     

A Photoelectrochemical Solar Cell Consisting of a Cadmium Sulfide Photoanode and a Ruthenium–2,2′‐Bipyridine Redox Shuttle in a Non‐aqueous Electrolyte

A photoelectrochemical (PEC) cell consisting of an n‐type CdS single‐crystal electrode and a Pt counter electrode with the ruthenium–2,2′‐bipyridine complex [Ru(bpy)₃]^2+/3+ as the redox shuttle in a non‐aqueous electrolyte was studied to obtain a higher open‐circuit voltage (V_OC) than the onset voltage for water splitting. A V_OC of 1.48 V and a short‐circuit current (I_SC) of 3.88 mA cm^?2 were obtained under irradiation by a 300 W Xe lamp with 420–800 nm visible light. This relatively high voltage was presumably due to the difference between the Fermi level of photo‐irradiated n‐type CdS and the redox potential of the Ru complex at the Pt electrode. The smooth redox reaction of the Ru complex with one‐electron transfer was thought to have contributed to the high V_OC and I_SC. The obtained V_OC was more than the onset voltage of water electrolysis for hydrogen and oxygen generation, suggesting prospects for application in water electrolysis.     

Selective Ion Exchange in Supramolecular Channels in the Crystalline State

Artificial ion channels are of increasing interest because of potential applications in biomimetics, for example, for realizing selective ion permeability through the transport and/or exchange of selected ions. However, selective ion transport and/or exchange in the crystalline state is rare, and to the best of our knowledge, such a process has not been successfully combined with changes in the physical properties of a material. Herein, by soaking single crystals of Li₂([18]crown‐6)₃[Ni(dmit)₂]₂(H₂O)₄ ( 1 ) in an aqueous solution containing K⁺, we succeeded in complete ion exchange of the Li⁺ ions in 1 with K⁺ ions in the solution, while maintaining the crystalline state of the material. This ion exchange with K⁺ was selectively conducted even in mixed solutions containing K⁺ as well as Na⁺/Li⁺. Furthermore, remarkable changes in the physical properties of 1 resulted from the ion exchange. Our finding enables not only the realization of selective ion permeability but also the development of highly sensitive biosensors and futuristic ion exchange agents, for example.     

Nanoparticles of amorphous ruthenium sulfide easily obtainable from a TiO2-supported hexanuclear cluster complex [Ru6C(CO)16]2-: a highly active catalyst for the reduction of SO2 with H2

TiO(2)-supported ruthenium-metal particles were derived from an anionic hexanuclear carbido carbonyl cluster [Ru(6)C(CO)(16)](2-) and compared with those prepared conventionally by impregnation of TiO(2) with a solution of RuCl(3) followed by reduction with H(2). The average sizes of the metal particles in both systems are similar, that is, 12 A for molecular cluster-derived particles and 15 A for those derived from the RuCl(3) precursor, although the size distribution is sharper in the former case. These supported particles efficiently promote the reduction of SO(2) with H(2) to give elemental sulfur. Their active form is ruthenium sulfide as confirmed by EXAFS and X-ray diffraction measurements. The nanoscale ruthenium sulfide particles, which originated from the cluster complex, have an amorphous character and show activity even at low temperature (463 K), whereas ruthenium sulfide formed from RuCl(3)-derived metal dispersion is a pyrite-type RuS(2) crystallite and needs a temperature above 513 K to effect the same catalysis. Amorphous ruthenium sulfide maintains its nano-sized scale (approximately 14 A) regardless of the reaction temperature, while RuS(2) crystallite aggregates to form larger nonuniform particles.     

Electrochemical behavior of pyrroloquinoline quinone immobilized on silica gel modified with zirconium oxide

Pyrroloquinoline quinone (PQQ) was immobilized on the silica gel surface modified with zirconium oxide, designated as Si:Zr, by the carboxylic groups of the PQQ molecule and the zirconium oxide on the silica surface. The electrochemistry of PQQ immobilized on the Si:Zr matrix, incorporated in a carbon paste electrode, was evaluated using the cyclic voltammetry technique. The Si:Zr:PQQ-modified electrode showed a redox couple at E(m)=(E(pa1)+E(pc))/2=-0.150 V vs SCE at pH 7, close to that observed in aqueous solution, and another oxidation peak, E(pa2)=-0.100 V vs SCE. Studies in different pH solutions in the range of 3-7 showed that the first oxidation peak, E(pa1), is highly dependent on the solution pH shifting from to -0.175 to 0.100 V vs SCE, while E(pa2) remains practically constant at 0.100 V as the pH decreases from 7 to 3. The immobilized PQQ electrode presented the property to electrocatalyze the NADH at 150 mV vs SCE. The effect of addition of Ca(2+) ions on the electrode electroactivity for the NADH oxidation was also verified. Different from that observed for the PQQ immobilized on other electrode materials, the Ca(2+) ions did not influence the electrocatalytical response; however, the electrode stability was considerably improved in the presence of Ca(2+) ions, indicating that the matrix surface has a great influence on the electrochemical behavior of PQQ.     

A Simple,sensitive, and selective electrochemical aptasensor for cortisol based on rGO-AuNPs

Cortisol is a steroid hormone naturally produced by the adrenal glands. It participates in and controls several processes in the body and is considered an important physiological biomarker. Due to its very low concentrations in body fluids, its detection requires high sensitivity and specificity. Here, we present a simple electrochemical biosensor based on reduced graphene oxide (rGO) modified with gold nanoparticles (AuNPs) for the immobilization of the cortisol-specific aptamer (Ap) (MCH-Ap-AurGO/GCE). Important analytical parameters for identifying the target analyte were optimized, such as conditions and amount of immobilized Ap, the influence of the concentration and nature of the supporting electrolyte, pH of the medium, and incubation time. The optimized conditions for the aptasensor were: concentration of Ap 1.0 × 10⁻⁶ mol L⁻¹, support electrolyte Tris/HCl 50 mmol L⁻¹, MgCl₂ 10 mmol L⁻¹, and NaCl 10 mmol L⁻¹, at pH 5.0 and incubation time of 15 min. A linear response range was obtained from 1 × 10⁻¹⁸ up to 1 × 10⁻¹¹ mol L⁻¹ of cortisol with a detection limit (LOD) of 1.0 × 10⁻¹⁸ mol L⁻¹. A curve adjusted for operational purposes in the saliva sample was fitted for the concentration range between 0.5 × 10⁻¹⁴ and 1 × 10⁻¹¹ mol L⁻¹, with a linear regression equation ΔRtc/Rtc₁ = 2.70 + 0.17 × log([Cortisol]). The aptasensor demonstrated a great potential for detecting cortisol in a simple, fast, and highly sensitive way, opening its path for application in real samples, which present levels below the concentration in which cortisol is commonly found in body fluids.     

Elucidation of the Covalent and Tertiary Structures of Biologically Active Ts3 Toxin

Ts3 is an alpha scorpion toxin from the venom of the Brazilian scorpion Tityus serrulatus. Ts3 binds to the domain IV voltage sensor of voltage‐gated sodium channels (Na_v) and slows down their fast inactivation. The covalent structure of the Ts3 toxin is uncertain, and the structure of the folded protein molecule is unknown. Herein, we report the total chemical synthesis of four candidate Ts3 toxin protein molecules and the results of structure–activity studies that enabled us to establish the covalent structure of biologically active Ts3 toxin. We also report the synthesis of the mirror image form of the Ts3 protein molecule, and the use of racemic protein crystallography to determine the folded (tertiary) structure of biologically active Ts3 toxin by X‐ray diffraction.