Cross‐Coupling of Organolithium with Ethers or Aryl Ammonium Salts by C−O or C−N Bond Cleavage

Various aryl‐, alkenyl‐, and/or alkyllithium species reacted smoothly with aryl and/or benzyl ethers with cleavage of the inert C?O bond to afford cross‐coupled products, catalyzed by commercially available [Ni(cod)₂] (cod=1,5‐cyclooctadiene) catalysts with N‐heterocyclic carbene (NHC) ligands. Furthermore, the coupling reaction between the aryllithium compounds and aryl ammonium salts proceeded under mild conditions with C?N bond cleavage in the presence of a [Pd(PPh₃)₂Cl₂] catalyst. These methods enable selective sequential functionalizations of arenes having both C?N and C?O bonds in one pot.     

Synthesis and crosslinking reaction of a novel polymer containing benzoxazine and phenyleneethynylene moieties in the main chain

A novel polymer, poly( 1 ) containing benzoxazine and phenyleneethynylene moieties in the main chain with number‐average molecular weights ranging from 1400 to 9800 was obtained quantitatively by the Sonogashira–Hagihara coupling polymerization of the corresponding iodophenyl‐ and ethynylphenyl‐substituted monomer 1 . Poly( 1 ) was heated at 200 °C under N₂ for 2 h to obtain the cured polymer, poly( 1 )′ via the ring‐opening polymerization of the benzoxazine moieties. The structures of the polymer before and after curing were confirmed by ¹H‐NMR, IR, and UV–vis absorption and reflectance spectroscopies. Poly( 1 )′ was thermally more stable than monomer 1 and poly( 1 ). A specimen was prepared from a mixture of poly( 1 ) and phenol‐diaminodiphenylmethane type benzoxazine 2 by heating at 200 °C for 2 h under N₂. The poly( 1 )/ 2 resin was thermally stable than bisphenol‐A type benzoxazine resin 3 . Poly( 1 ) exhibited XRD peaks corresponding to the d‐spacings of 1.26–0.98 and 0.40 nm, assignable to the repeating monomer unit and alignment of polymer molecules, respectively. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2581–2589     

Designing Cross-Coupling Reactions using Aryl(trialkyl)silanes

Organo(trialkyl)silanes have several advantages, including high stability, low toxicity, good solubility, easy handling, and ready availability compared with heteroatom-substituted silanes. However, methods for the cross-coupling of organo(trialkyl)silanes are limited, most probably because of their exceeding robustness. Thus, a practical method for the cross-coupling of organo(trialkyl)silanes has been a long-standing challenging research target. This article discusses how aryl(trialkyl)silanes can be used in cross-coupling reactions. A pioneering example is Cu^II catalytic conditions with the use of electron-accepting aryl- or heteroaryl(triethyl)silanes and aryl iodides. The reaction forms biaryls or teraryls. This design concept can be extended to Pd/Cu^II-catalyzed cross-coupling polymerization reactions between such silanes and aryl bromides or chlorides and to Cu^I-catalyzed alkylation using alkyl halides.     

Preparation of free‐standing silicone particles in aqueous heterogeneous system

To prepare cross‐linked silicone (silicone rubber) particles in an aqueous medium, we investigated two synthesis methods involving a miniemulsion system. The first method was based on cationic ring‐opening polymerization of cyclic siloxane, which is a common synthetic route for linear silicone oil and uses octamethylcyclotetrasiloxane (D₄) as the monomer and dimeric D₄ (bis‐D₄) as the cross‐linker. Although this method produces silicone particles, the particles do not remain in the particulate state after drying because of low cross‐linking density. The polymerization mechanism of this method was also investigated, which proceeds under the ring‐opening reaction of D₄ in monomer droplets and upon polycondensation of hydrolyzed D₄, which occurs in the water phase (ie, outside the monomer droplets). This mechanism implied that introducing the cross‐linking structure into particles is difficult because of the low solubility of bis‐D₄ in water. To overcome these difficulties, we demonstrated a second method of preparing silicone particles based on the thiol‐Michael addition reaction between thiol‐terminated silicone oil and triacrylate in miniemulsion systems. Transmission electron microscopy images indicated that the silicone particles obtained in the particulate state upon drying and the aggregates of these particles showed elasticity.     

Formation of homogeneous nanocomposite films at ambient temperature via miniemulsion polymerization using graphene oxide as surfactant

A convenient and industrially scalable method for synthesis of homogeneous nanocomposite films comprising poly(styrene‐stat‐butyl acrylate) and nanodimensional graphene oxide (GO) or reduced GO (rGO) is presented. Importantly, the nanocomposite latex undergoes film formation at ambient temperature, thus alleviating any need for high temperature or high pressure methods such as compression molding. The method entails synthesis of an aqueous nanocomposite latex via miniemulsion copolymerization relying on nanodimensional GO sheets as sole surfactant, followed by ambient temperature film formation resulting in homogeneous film. For comparison, a similar latex obtained by physical mixing of a polymer latex with an aqueous GO dispersion results in severe phase separation, illustrating that the miniemulsion approach using GO as surfactant is key to obtaining homogeneous nanocomposite films. Finally, it is demonstrated that the GO sheets can be readily reduced to rGO in situ by heat treatment of the film. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2289–2297     

Synthetic Utilization of α-Phosphonovinyl Anions

The α-phosphonovinyl anions, generated in situ from treatment of β-hetero-substituted vinyl-phosphonates 1a-c with LDA (or LTMP), were trapped with various electrophiles such as chlorotriorganosilanes, chlorotrimethylgermane, chlorotriorganotins, dimethyl disulfide, and halogen to afford the corresponding β-hetero-substituted α-functionalized vinylphosphonates 2–14 in good to excellent yields. The Friedel-Crafts reaction of α-(silyl) or α-(germyl)phosphonoketene dithioacetals 2, 9 or 4 with acid chlorides gave α-acylated phosphonoketene dithioacetals 15–19 in 53–91 % yields. The palladium-catalyzed cross-coupling reaction of β-ethoxy-α-(tributylstannyl)vinylphosphonate 13 with a variety of organic halides (R = acyl, allyl, aryl etc.) provided β-ethoxy-α-substituted vinylphosphonates 20–25 in good to moderate yields. The palladium-mediated cross-coupling reaction of α-(iodo)-vinyl-phosphonates 7, 14 with terminal acetylenes afforded α-alkynylated vinylphosphonates 26–29 in 69–83 % yields.     

Preparation and characterization of conducting polyaniline layered magnetic nano composite polymer particles

Considering the application potentials of organic materials possessing both conducting and ferromagnetic functions in various electronic devices, an attempt was made to prepare conducting polyaniline (PANI) layered magnetic nano composite polymer particles. Two routes were used to modify magnetic Fe₃O₄ core particles. In one route, seeded emulsion polymerization of methyl methacrylate (MMA) was carried out in presence of nano‐sized Fe₃O₄ core particles. In another route, cross‐linker ethyleneglycol dimethacrylate (EGDM) was used in addition to MMA. The modified composite particles were named as Fe₃O₄/PMMA and Fe₃O₄/P(MMA‐EGDM), respectively. Finally, seeded chemical oxidative polymerization of aniline was carried out in the presence of Fe₃O₄/PMMA and Fe₃O₄/P(MMA‐EGDM) composite seed particles to obtain Fe₃O₄/PMMA/PANI and Fe₃O₄/P(MMA‐EGDM)/PANI composite polymer particles. The modification of Fe₃O₄ core particles was confirmed by electron micrographs, FTIR, UV–visible spectra, X‐ray photoelectron spectra, X‐ray diffraction pattern and thermogravimetric analyses. A comparative study showed that crosslinking of intermediate shell improved the magnetic susceptibility and electrical conductivity of PANI layered magnetic nano composite particles. Copyright © 2013 John Wiley & Sons, Ltd.     

Molecular Chirality Recognized by Achiral Compounds

Abstract

Three cases are described where chirality is recognized by achiral molecules, where chirality is induced into achiral compounds through interactions with chiral compounds, and lastly where induced chirality in the solid-state is utilized for an enantio-selective photoreaction. In the first instance, the thermodynamically and kinetically preferred diastereoisomer of an optically labile chromium complex depended on the nature of the achiral solvent. In the second case, for the first time 1,2-chloroethane was trapped and observed in a chiral near-eclipsed form and 1-chloropropane in the truly eclipsed form at room temperature in a 1:1 inclusion complex with an optically active host molecule. Finally, induced chirality in a prochiral compound in the solid-state was successfully employed in an enantio-selective photoreaction. In the two cases, solid-state CD provided valuable information.     

A Synthetic Method for Preparing 3,3-Dialkyl-1,2,3,8-tetrahydroazulen-1-one

The trimethylsilyl enol ether of l-acetylcyclohepta-1,3,5-triene was transformed to 3,3-dialkyl-1,2,3,8-tetrahydroazulen-1-one by a two-step sequence involving the Mukaiyama aldol reaction with ketones and the subsequent Nazarov cyclization.