Synthesis and Crystal Structure of 3-（4-Bromobenzyloxy）-6-morpholinopyridazine

The title compound 3-(4-bromobenzyloxy)-6-morpholinopyridazine(C15H16BrN3O2) was synthesized,and its crystal structure was studied.It crystallizes in the triclinic system,space group P with a = 8.3408(17),b = 8.8620(18),c = 10.832(2) ,α = 108.09(3),β = 91.28(3),γ = 100.90(3)°,Dc = 1.562 g/cm3,Z = 2,λ = 0.71073 ,μ(MoKα) = 2.769 mm-1,Mr = 350.22,V = 744.5(3) 3,F(000) = 356,the final R = 0.0522 and wR = 0.1366 for 2016 observed reflections with I > 2σ(I).In the crystal structure,the morpholine ring adopts a chair conformation with O(2) and N(3) atoms at the flap positions-0.656(7) and 0.622(6)  out of the mean plane formed by the other four C atoms,respectively.These molecules generate centro-symmetric dimers through intermolecular π-π interaction.     

Synthesis of 2,3-diaryl-5H-imidazo[2,1-a]isoindol-5-ones via the one-pot reaction of 1,2-diketones, 2-formylbenzoic acids, and ammonium acetate

We describe a new one-pot synthesis of 2,3-diaryl-5H-imidazo[2,1-a]isoindol-5-ones via the reaction of 1,2-diketones, 2-formylbenzoic acids, and ammonium acetate in acetic acid under reflux conditions and in the absence of a catalyst.     

A green one-pot synthesis of N-alkyl-2-(2-oxoazepan-1-yl)-2-arylacetamide derivatives via an Ugi four-center,three-component reaction in water

This work describes a green and efficient one-pot synthesis of N-alkyl-2-(2-oxoazepan-1-yl)-2-arylacetamide derivatives via an Ugi four-center, three-component reaction of 6-aminohexanoic acid, aromatic aldehydes, and isocyanide derivatives in water under reflux conditions in the absence of a catalyst.     

Sheath-assisted focusing of microparticles on lab-on-a-chip platforms

Lab-on-a-chip (LOC) technologies can take advantage of sheath flows for particle/cell focusing before sensing or sorting. The integration of focusing with other microscale manipulation techniques (e.g., sorting) creates a trade-off between the throughput of the device and its performance. Therefore, exploring the effective parameters for cells/particles focusing enables us to improve the desired output of LOC devices. A common configuration for sheath-assisted focusing is Y junctions, which are parametrically studied in this paper. First, a computational model was developed and validated by comparing it with our experimental results. Using COMSOL Multiphysics modeling, the effects of multiple parameters were studied. These parameters include the sheath flow ratio (sheath flow over total flow), width ratio (width of the sheath inlet over the total width), junction angles, and particle size on the focusing width and the distribution of the particles within the focusing region. Then, the numerical data were used to develop two generalized linear models to predict the focusing width of the particles and the standard deviation of the position of the particles. The results showed that the focusing width is greatly impacted by the sheath flow rate ratio. Further, the standard deviation of the position of the particles, which represents the concentration of the particles, is mostly dependent on the flow rate ratio, width ratio, and particle size. Our results provide a better understanding of how the device geometrical and operational factors affect the position of the particles in the development of high-performance on-chip sensing and sorting of both cells and particles.     

On the Degeneration, Regeneration and Braid Monodromy of T×T

This paper is the first in a series of three papers concerning the surface T×T. Here we study the degeneration of T×T and the regeneration of its degenerated object. We also study the braid monodromy and its regeneration.     

A metal organic framework prepared from benzene-1,3,5-tricarboxylic acid and copper(II), and functionalized with various polysulfides as a sorbent for selective sorption of trace amounts of heavy metal ions

Novel composites were obtained via direct assembly of polysulfides (S_x^2?, X?=?3, 4, 6) on the surface of a metal organic framework (MOF; type benzene-1,3,5-tricarboxylic/Cu(II). They are referred to as S_x-MOFs and were used for highly selective and efficient extraction of ultra-trace amounts of heavy metal ions from aqueous solutions. The structure of the S_x-MOFs was characterized by Raman spectroscopy, FT-IR, X-ray diffraction, and scanning electron microscopy. The Raman spectra of S_x-MOF is similar to the bare MOF and shows the MOFs structure to be well retained after S_x functionalization. The selective interaction of S_x with soft metal ions and the high surface area of MOFs resulted in excellent affinity and selectivity for ions such as Hg(II). The S_x-MOFs of type S₄-MOF had the highest distribution coefficient K_d value (~10⁷) and best extraction recovery (~100%) for Hg(II). The S₄-MOF also has high selectivity in the following order: Hg(II) >?>?Pb(II)?>?Zn(II)?>?Ni(II)?>?Co(II). The binding process of the metals occurs via M–S bonding. The ions were quantified by inductively coupled plasma optical emission spectrometry (ICP-OES). The detection limit for Hg(II) is 0.13 μg L^?1. The S₄-MOF was applied to the extraction of trace metal ions from natural and contaminated waters and data were compared with other sorbets. The results revealed that S₄-MOF is an excellent adsorbent for sorption of heavy metal ions even in the presence of the relatively high concentration of other ions.

Open image in new window

Graphical abstract A composite was synthesized via direct assembly of polysulfides (S_x^2?, X?=?3, 4, 6) on surface of the metal organic framework (S_x-MOF) and was used for selective and efficient extraction of ultra-trace amounts of heavy metal ions from aqueous solutions.

     

Preparation and properties of novel soluble aromatic polyimides from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing triphenylamine unit were prepared by two different methods, i.e., a conventional two-step method starting from 4,4′-diaminotriphenylamine and aromatic tetracarboxylic dianhydrides and the one-step thioanhydride method starting from the aromatic diamine and aromatic tetracarboxylic dithioanhydrides. Both procedures yielded high-molecular-weight polyimides with inherent viscosities of 0.47–1.17 dL/g. Some of these polymers were soluble in organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, m-cresol, and pyridine. All the polyimides afforded transparent, flexible, and tough films, and the color varied from pale yellow to dark red, depending markedly on the tetracarboxylic acid components. The glass transition temperatures (T_gs) of these polyimides were in the range of 287–331°C and the 10% weight loss temperatures were above 520°C in air. The polyimides prepared by the one-step method exhibited better solubility in organic solvents and had somewhat lower T_gs than the polymers prepared by a conventional two-step method.     

Synthesis and characterization of novel soluble triphenylamine‐containing aromatic polyamides based on N,N′‐bis(4‐aminophenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine, N, N′‐bis(4‐aminophenyl)‐N, N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluoronitrobenzene, followed by catalytic reduction. A series of novel aromatic polyamides with triphenylamine units were prepared from the diamine and various aromatic dicarboxylic acids or their diacid chlorides via the direct phosphorylation polycondensation or low‐temperature solution polycondensation. All the polyamides were amorphous and readily soluble in many organic solvents such as N, N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass‐transition temperatures (257–287 °C), 10% weight‐loss temperatures in excess of 550 °C, and char yields at 800 °C in nitrogen higher than 72%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2810–2818, 2002     

Screening, substrate specificity and stereoselectivity of yeast strains, which reduce sterically hindered isopropyl ketones

Towards the synthesis of sterically hindered optically active secondary alcohol 2, yeast strains (Candida floricola IAM 13115 and Trichosporon cutaneum IAM 12206) with si-face hydride attack on isopropyl phenylsulfonylmethyl ketone 1 were developed by screening. Strains with complementary re-facial selectivity (Pichia angusta IAM 12895 and Pichia minuta IAM 12215) were also found. Based on the substrate specificity studies of these four strains, microbial reduction was applied to the synthesis of (3S,5S)-2,6-dimethyl-3,5-heptanediol 12a.     

Aliphatic sulfates released from Daphnia induce morphological defense of phytoplankton: isolation and synthesis of kairomones

Six aliphatic sulfates, kairomones released from a crustacean Daphnia pulex induce morphological changes of phytoplankton Scenedesmus gutwinskii at ppb (10⁻⁹ g/mL) concentrations.