Magnetic solid-phase extraction of polycyclic aromatic hydrocarbons using a graphene oxide/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@polystyrene nanocomposite

A magnetic sorbent was fabricated by coating the magnetized graphene oxide with polystyrene (PS) to obtain a sorbent of the type GO-Fe₃O₄@PS. The chemical composition and morphology of the sorbent were characterized. The sorbent was employed for the enrichment of polycyclic aromatic hydrocarbons (PAHs) from water samples. Various parameters affecting the enrichment were investigated. The PAHs were then quantified by gas chromatography with flame ionization detection. Linear responses were found in the range of 0.03–100 ng mL^?1 for naphthalene and 2-methylnaphthalene, and of 0.01–100 ng mL^?1 for fluorene and anthracene. The detection limits (at an S/N ratio of 3) range between 3 and 10 pg mL^?1. The relative standard deviations (RSDs) for five replicates at three concentration levels (0.05, 5 and 50 ng mL^?1) of analytes ranged from 4.9 to 7.4%. The method was applied to the analysis of spiked real water samples. Relative recoveries are between 95.8 and 99.5%, and RSD% are <8.4%.

Open image in new window

Graphical abstract A magnetic sorbent was fabricated by polystyrene coated on the magnetic graphene oxide for the extraction and preconcentration of PAHs in water samples prior to their determination by gas chromatography with flame ionization detection.

     

Ultrasound-promoted green synthesis of 1,4-dihydropyridines using fuctionalized MWCNTs as a highly efficient heterogeneous catalyst

A new method for multi-component synthesis of 1,4-dihydropyridine derivatives (1,4-DHPs) in the presence of meglumine supported on multiwalled carbon nanotubes (MWCNTs@meglumine) as a new heterogeneous, highly efficient and reusable catalyst was investigated. The reaction was performed under ultrasonic irradiation in EtOH at room temperature. A new, highly efficient heterogeneous catalyst, short reaction times, high to excellent yield of products, and safe and clean conditions are the advantages of the presented method.     

Dynamic stereochemistry of erigeroside by measurement of 1H-1H and 13C-1H coupling constants

Erigeroside was extracted from Satureja khuzistanica Jamzad (Marzeh Khuzistani in Persian, family of lamiaceae), and (1)H, (13)C, (13)C{(1)H}, (1)H-(1)H COSY, HMQC and J-HMBC were obtained to identify this compound and determine a complete set of J-coupling constants ((1)J(C-H), (2)J(C-H), (3)J(C-H) and (3)J(H-H)) values within the exocyclic hydroxymethyl group (CH(2)OH) and anomeric center. In parallel, density functional theory (DFT) using B3LYP functional and split-valance 6-311++G** basis set has been used to optimized the structures and conformers of erigeroside. In all calculations solvent effects were considered using a polarized continuum (overlapping spheres) model (PCM). The dependencies of (1)J, (2)J and (3)J involving (1)H and (13)C on the C(5')-C(6') (omega), C(6')-O(6') (theta) and C(1')-O(1') (phi) torsion angles in erigeroside were computed using DFT method. Complete hyper surfaces for (1)J(C1',H1'), (2)J(C5',H6'R), (2)J(C5',H6'S), (2)J(C6',H5'), (3)J(C4',H6'R), (3)J(C4',H6'S) and (2)J(H6'R-H5'S) as well as (3)J(H5',H6'R) were obtained and used to derive Karplus equations to correlate these couplings to omega, theta and phi. These calculated J-couplings are in agreement with experimental values. These results confirm the reliability of DFT calculated coupling constants in aqueous solution.     

Isolation of beta-glucan from the cell wall of Saccharomyces cerevisiae

Beta-glucan, one of the major cell wall components of Saccharomyces cerevisiae (S. cerevisiae), has been found to enhance immune functions. At present study, we developed an optimal procedure to extract and purify beta-glucan. At first, yeast cells were grown in sabouraud dextrose agar and then cultured in yeast extract-peptone-glucose (YPG) broth. After incubation, cells were harvested, washed and disrupted by means of sonication method. The obtained cell walls were used to prepare alkali-soluble beta-glucan (glucan-S1). In this regard, 2% sodium hydroxide (NaOH) and 3% acetic acid were used in alkaline-acid extraction, respectively. This preparation contained 2.4% protein. In the next step, DEAE sephacel chromatography was used to remove remaining proteins (glucan-S2). Subsequently this preparation was applied into concanavalin-A sepharose column to remove manann. Finally, beta-glucan free of mannoprotein complexes was prepared (glucan-S3).     

Synergistic Porosity and Charge Effects in a Supramolecular Porphyrin Cage Promote Efficient Photocatalytic CO2 Reduction**

We present a supramolecular approach to catalyzing photochemical CO₂ reduction through second-sphere porosity and charge effects. An iron porphyrin box ( PB ) bearing 24 cationic groups, FePB-2(P) , was made via post-synthetic modification of an alkyne-functionalized supramolecular synthon. FePB-2(P) promotes the photochemical CO₂ reduction reaction (CO₂RR) with 97 % selectivity for CO product, achieving turnover numbers (TON) exceeding 7000 and initial turnover frequencies (TOF_max) reaching 1400 min⁻¹. The cooperativity between porosity and charge results in a 41-fold increase in activity relative to the parent Fe tetraphenylporphyrin ( FeTPP ) catalyst, which is far greater than analogs that augment catalysis through porosity ( FePB-3(N ), 4-fold increase) or charge (Fe p-tetramethylanilinium porphyrin ( Fe-p-TMA ), 6-fold increase) alone. This work establishes that synergistic pendants in the secondary coordination sphere can be leveraged as a design element to augment catalysis at primary active sites within confined spaces.     

Trisecant lemma for nonequidimensional varieties

Let X be an irreducible projective variety over an algebraically closed field of characteristic zero. For ≥ 3, if every (r−2)-plane , where the x _i are generic points, also meets X in a point x _r different from x ₁,..., x _r−1, then X is contained in a linear subspace L such that codim _L X ≥ r − 2. In this paper, our purpose is to present another derivation of this result for r = 3 and then to introduce a generalization to nonequidimensional varieties. For the sake of clarity, we shall reformulate our problem as follows. Let Z be an equidimensional variety (maybe singular and/or reducible) of dimension n, other than a linear space, embedded into ℙ^r, where r ≥ n + 1. The variety of trisecant lines of Z, say V _1,3(Z), has dimension strictly less than 2n, unless Z is included in an (n + 1)-dimensional linear space and has degree at least 3, in which case dim V _1,3(Z) = 2n. This also implies that if dim V _1,3(Z) = 2n, then Z can be embedded in ℙ ^{n + 1}. Then we inquire the more general case, where Z is not required to be equidimensional. In that case, let Z be a possibly singular variety of dimension n, which may be neither irreducible nor equidimensional, embedded into ℙ^r, where r ≥ n + 1, and let Y be a proper subvariety of dimension k ≥ 1. Consider now S being a component of maximal dimension of the closure of . We show that S has dimension strictly less than n + k, unless the union of lines in S has dimension n + 1, in which case dim S = n + k. In the latter case, if the dimension of the space is strictly greater than n + 1, then the union of lines in S cannot cover the whole space. This is the main result of our paper. We also introduce some examples showing that our bound is strict. __________ Translated from Fundamentalnaya i Prikladnaya Matematika, Vol. 12, No. 2, pp. 71–87, 2006.     

Steering the Selectivity of Electrocatalytic Glucose Oxidation by the Pt Oxidation State

Electrocatalytic glucose oxidation can produce high value chemicals, but selectivity needs to be improved. Here we elucidate the role of the Pt oxidation state on the activity and selectivity of electrocatalytic oxidation of glucose with a new analytical approach, using high-pressure liquid chromatography and high-pressure anion exchange chromatography. It was found that the type of oxidation, i.e. dehydrogenation of primary and secondary alcohol groups or oxygen transfer to aldehyde groups, strongly depends on the Pt oxidation state. Pt⁰ has a 7-fold higher activity for dehydrogenation reactions than for oxidation reactions, while PtO_x is equally active for both reactions. Thus, Pt⁰ promotes glucose dialdehyde formation, while PtO_x favors gluconate formation. The successive dehydrogenation of gluconate is achieved selectively at the primary alcohol group by Pt⁰, while PtO_x also promotes the dehydrogenation of secondary alcohol groups, resulting in more complex reaction mixtures.     

Metal Catalyzed Polymerization: From Stereoregular Poly(α-olefins) to Tailor-Made Biodegradable/Biorenewable Polymers and Copolymers

Metal catalyzed polymerizations are among the most important chemical reactions, accounting for the production of about 400 million tons per year of polymeric materials, 50 % of which are polyolefins. The CIRCC research units at the University of Salerno, founded by the late Professor Adolfo Zambelli, a coworker of Giulio Natta and a pioneer in the studies of stereospecific polymerization catalysts, has a consolidated expertise in this field. Although often considered a “mature” area of research, olefin polymerization catalysis continues to drive great interest of both industrial and academic scientists. On the other hand, strong political and economic pressure toward the development of “green” and possibly biodegradable alternatives to olefin-based polymers stimulated our group to direct increasing research efforts in the area of sustainable polymers. In this perspective, we focus on the most recent work from the CIRCC research units involved in homogeneous catalysis for polymerization of a variety of monomers, with the aim to address how the concepts and the expertise developed for olefin polymerization can be applied to the development of different metal-catalyzed polymerizations and copolymerizations. Of course, although the results are discussed in the frame of the most important literature contributions, a comprehensive review of such a wide and diversified topic is out of the scope of the paper. References to reviews covering the different types of metal catalyzed polymerizations are provided in each chapter.