A Colorimetric and Fluorescent Indicator for Hg<Superscript>2+</Superscript> Detection Based on Cinnamamide Group-Containing Rhodamine Derivative

A colorimetric and fluorescent indicator based on cinnamamide group-containing rhodamine derivative was synthesized for the detection of Hg²⁺. The rhodamine B and cinnamamide were connected via ethylenediamine as a bridging molecule through a condensation reaction to obtain a colorimetric and fluorescent indicator for the detection of Hg²⁺ in H₂O-EtOH (4:1, v/v). The indicator was excellent in the selectivity of Hg²⁺ and was almost unaffected by other common ions such as Na⁺, K⁺, Mg²⁺, Fe³⁺, Cu²⁺, Zn²⁺, Cr³⁺. The Hg²⁺-containing aqueous solution turned from colorless to red within 7 min after the addition of the indicator, and had an absorption peak at 564 nm in UV-vis, which implies a significant colorimetric phenomenon. Their characteristic peaks varied with the Hg²⁺ content, and they reached a linear relationship at low concentrations. The binding stoichiometry proved to be 1:1. The lowest detection limit was 4.1?×?10^?7 mol/L, ranging from acidic to neutral.     

Ultrathin nanosheets of Mn<Subscript>3</Subscript>O<Subscript>4</Subscript>: A new two-dimensional ferromagnetic material with strong magnetocrystalline anisotropy

Two-dimensional (2D) materials with robust ferromagnetism have played a key role in realizing nextgeneration spin-electronic devices, but many challenges remain, especially the lack of intrinsic ferromagnetic behavior in almost all 2D materials. Here, we highlight ultrathin Mn₃O₄ nanosheets as a new 2D ferromagnetic material with strong magnetocrystalline anisotropy. Magnetic measurements along the in-plane and out-of-plane directions confirm that the out-of-plane direction is the easy axis. The 2D-confined environment and Rashba-type spin-orbit coupling are thought to be responsible for the magnetocrystalline anisotropy. The robust ferromagnetism in 2D Mn₃O₄ nanosheets with magnetocrystalline anisotropy not only paves a new way for realizing the intrinsic ferromagnetic behavior in 2D materials but also provides a novel candidate for building next-generation spin-electronic devices.     

Stochastic resonance characteristic analysis of new potential function under Levy noise and bearing fault detection

Based on the output saturation of classcial bistable stochastic resonance (CBSR), a new type of piecewise nonlinear bistable stochastic resonance (PNBSR) system is constructed. The mean signal-to-noise ratio gain is regarded as an index to measure the stochastic resonance phenomenon. The laws for the resonant output of piecewise nonlinear bistable system governed by l, c, a, b and D of Levy noise are explored under different characteristic index α and symmetry parameter β of Levy noise. The results show that the output of PNBSR system has increased 4?dB by comparing with the output signal-to-noise ratio of CBSR system. And the stochastic resonance phenomenon can be induced by adjusting the piecewise nonlinear system's parameters under any α or β of Levy noise. The interval of the parameters of system which induces good stochastic resonance is roughly the same. And the output signal waveform of resonance is very similar to the input signal waveform, which has some reference value for the signal recovery. Moreover, we can find the good stochastic resonance interval of the system parameters do not change with D of Levy noise under the different noise intensity D of Levy noise. On the basis of this, adjusting the intensity amplification factor D of Levy noise, which induces good stochastic resonance, and the interval does not change with α or β. At last, the piecewise nonlinear bistable system is applied to detect bearing fault signals, which achieves better performance compared with the classical bistable system.     

基于气体放电等离子体射流源的模拟离子引出实验平台物理特性

离子引出过程是原子蒸气激光同位素分离中非常重要的物理过程之一,而其中关键的等离子体参数(等离子体初始密度和电子温度等)均会对离子引出特性产生影响.基于千赫兹电源驱动的氩气高压交流放电等离子体射流源,建立了离子引出模拟实验平台-2015 (IEX-2015),开发了用于诊断氩等离子体参数的"碰撞-辐射"模型,对等离子体射流区的电子温度和电子数密度等关键参数进行了测量.结果表明,电源输入功率和驱动频率以及工作气体流量均会对等离子体射流区的电子温度和数密度产生影响;在真空腔压强为10~(-2)Pa量级下,射流区电子数密度和电子温度的可调参数范围分别为10~9—10~(11)cm~(-3)和1.7—2.8 e V,这与实际离子引出过程中的等离子体参数范围相近.在此基础上,开展了不同引出电压、极板间距和电子数密度条件下初步的离子引出实验,所得到的离子引出电流变化规律亦与实际原子蒸气激光同位素分离中的离子引出特性定性一致.上述研究结果验证了在IEX-2015上开展离子引出模拟实验的可行性,为后续深入开展离子引出特性的实验研究准备了良好的条件.     

NO_x在Pt及其合金表面吸附的第一性原理模拟研究

本研究通过密度泛函理论(DFT)模拟氮氧化物(NO_X)在Pt及Pt/(Au,Rh)合金slab模型(111)表面的吸附行为,计算其吸附能与结合能.对比NO和NO_2的实验结果,表明合金元素的添加,可能使Pt(111)对NO_X的吸附能力和选择性发生变化,其中Au元素表面置换使得总吸附能力下降,但更容易吸附NO_2; Rh元素表面置换则使得总吸附能力提高,且更容易吸附NO.     

双金属RuM（M=Co，Ni）合金纳米粒子负载于MIL-110（Al）：协同催化氨硼烷水解释氢

By adjusting various Ru/M (M=Co, Ni) molar ratios, a series of highly dispersed bimetallic RuM alloy nanoparticles (NPs) anchored on MIL-110(Al) have been successfully prepared via a conventional impregnation-reduction method. And they are first used as heterogeneous catalysts for the dehydrogenation reaction of AB at room temperature. The results reveal that the as-prepared Ru₁Co₁@MIL-110 and Ru₁Ni₁@MIL-110 exhibit the highest catalytic activities in different RuCo and RuNi molar ratios, respectively. It is worthy of note that the turnover frequency (TOF) values of Ru₁Co₁@MIL-110 and Ru₁Ni₁@MIL-110 catalysts reached 488.1 and 417.1 mol H₂ min^-1 (mol Ru)^-1 and the activation energies (E_a) are 31.7 and 36.0 kJ/mol, respectively. The superior catalytic performance is attributed to the bimetallic synergistic action between Ru and M, uniform distribution of metal NPs as well as bi-functional effect between RuM alloy NPs and MIL-110. Moreover, these catalysts exhibit favorable stability after 5 consecutive cycles for the hydrolysis of AB.     

Modulation of the Acher’s limit by medium thickness in [FeCoB/ZnO]50 multilayers

This work investigates the high frequency characteristics of [FeCoB/ZnO]₅₀ multilayers with different ZnO thickness. The results reveal that the Acher’s limit of [FeCoB/ZnO]₅₀ multilayers can be modulated by medium thickness. Increasing medium layer thickness is favorable for breaking through the Acher’s limit. It is found that the differences of Acher’s limit between multilayers and single layers are caused by magnetic interface anisotropy related to interface roughness and some unknown factor.     

相控阵天线主控系统中实时数据交互

波束控制系统是高功率相控阵天线的神经中枢,负责天线阵面中所有单元相位的精确控制和状态监测任务。为实现天线阵面的快速、精确波束转换,采用分布式拓扑结构和嵌入式实时操作系统,设计了两级分布式波束控制方案,开发了基于VxWorks的相控阵天线主控系统。通过UDP协议实现主控系统与其他系统的多节点网络通讯;针对高速、实时通讯需求,利用VxWorks多任务编程接口,设计了一种基于双缓冲队列的Socket通讯方法;为使通讯被各方正确解析,制定了自定义的应用层协议。基于VxWorks的相控阵天线主控系统的开发应用,验证了方案的可行性以及控制软件的可靠性和稳定性。     

新型二次电子倍增阴极构型设计与动力学过程

提出了一种可由脉冲功率驱动的新型二次电子倍增阴极构型,并对其进行了动力学过程的初步理论研究。首先,针对该二次电子倍增阴极,建立了动力学模型,获得了二次电子的位移和速度方程,讨论了电子初始出射速度对其轨迹、渡越时间和碰撞能量的影响,理论给出了渡越时间和碰撞能量的近似解析表达式。其次,通过动力学方程与Vaughan二次电子产额经验公式的耦合求解,获得了该二次电子倍增阴极的工作区间,并对其进行了细致讨论。结果表明：该新型二次电子倍增阴极二极管概念上是可行的,在涂敷高二次电子产额系数材料的圆柱形介质上施加合适的轴向和径向静电场(MV/m量级)以及轴向静磁场(T量级),可以达到电子沿阴极表面螺旋行进过程中实现二次电子倍增并最终获得电流沿轴向放大的设计目标。另外,讨论了正电荷沉积引发的二次电子倍增饱和现象,并对阴极发射电流密度进行了理论粗估,结果表明：阴极发射电流密度可达kA/cm²水平,具备强流发射特性;增加外加径向场强幅值可有效提升阴极发射电流密度。     

共形单步交替方向隐式时域有限差分方法及其改进

提出了一种基于共形网格技术的共形单步交替方向隐式时域有限差分(CLeapfrog ADI-FDTD)方法。与常规FDTD方法相比,此方法能够减小由于目标边界不契合网格划分而引入的阶梯近似误差,提高算法计算不规则目标时的精度;同时算法稳定性更强,计算效率更高。由于引入共形技术后显著降低了原差分法的无条件稳定性,本文利用增长矩阵本征值方法理论分析了算法的稳定性,然后采用了一种改进的共形面积计算方法,在此基础上提出了一种稳定性更高的改进的共形单步交替方向隐式时域有限差分(ICLeapfrog ADI-FDTD)方法。数值算例验证了ICLeapfrog ADI-FDTD是一种具有高稳定性和高精度的高效算法。