影响产生均匀等离子体状态的几个因素

 用数值模拟方法研究利用辐射加热来产生均匀等离子体状态,它可被用来测量元素的辐射不透明度,校验辐射不透明度理论。研究了在辐射加热铁的“三明治”型靶时影响生成均匀等离子体状态的几个重要因素（样品厚度、CH膜厚度和辐射源）所起的作用，研究发现，当铁等离子体通过热传导达到均匀状态时，其尺度必须与此时的传热距离相当，从而定出铁样品的厚度；低Z介质CH膜对铁等离子体有明显的箍束作用，调整CH膜的厚度可以调节所产生的等离子体状态；调整不同方向上的CH膜厚度，可以控制铁等离子体的膨胀方向，使它尽可能地达到一维膨胀，使得反推出的等离子体密度可以更加准确；样品的种类、厚度以及外面的低Z介质厚度决定了在某时刻能获得的等离子体状态，以及为产生此等离子体状态所需的最低辐射能。     

混合方次的Waring——Goldbach问题

研究混合方次的Waring--Goldbach     

Angular and NiFe thickness dependence of exchange bias in IrMn/NiFe/IrMn thin film

Exchange biased IrMn/NiFe/IrMn thin films were studied as a function of NiFe thickness. In plane angular dependence of a resonance field distribution which is measured by FMR was analyzed as a combined effect of an unidirectional anisotropy and an uniaxial anisotropy. The unidirectional anisotropic field and the uniaxial anisotropic field were linearly varied with NiFe thickness while the films with a thicker NiFe layer do not follow the linear variation. Resonance field and linewidth variations were also analysed with NiFe thickness.     

“压力管道安全检测与评价技术研究”项目简介

该项目研究内容以压力管道安全保障为中心，在管道危险源辨识与安全状况等级评价、无损检测和结构完整性评估技术三个方面取得了突破性进展。突破了安全状况等级定量评价、薄壁和大曲率管道焊缝缺陷检测、复杂管系统结构完整性评估等技术难题，首次提出在用压力管道安全保障五大环节的全过程技术方法，系统建立了压力管道安全检测与评价方法体系，在压力管道事故预防技术领域实现了跨跃式发展。     

LD端抽运平直腔Nd:YVO4固态激光器的输出功率特性研究

对LD端抽运平直腔Nd:YVO₄固态激光器输出功率特性受激光器内在诸因素(热透镜效应、腔长、激活孔径等)的制约关系进行了研究.并用传播圆-变换圆图解分析方法给出了合理的解释，同时，对进一步提高其输出功率特性指出了方向. 关键词： 固体激光器 热透镜 变换圆 平直腔     

Erratum: Yan Guo. Boltzmann diffusive limit beyond the Navier‐Stokes approximation,Communications on Pure and Applied Mathematics (2006) 59(5) 626‐687

The original article to which this erratum refers was published in Communications on Pure and Applied Mathematics Comm Pure Appl Math(2006)59(5) 626 .     

线性递归序列模q

设{u_k}_k≥0为一个线性递归序列．序列{u_k(mod q)}_(k≥0)是周期的,很多人都对其周期有过研究．本文应用二次数域中理想的理论,较完全地刻面了二次线性递归序列模q的周期长度,所获结果加强并推广了Engstrom及Wall的结论．     

G-网络排队系统的研究新进展

在研究排队网络的文献中,G-网络(即推广的排队网络)最近受到了国际学者广泛的关注,它的研究在一定程度上丰富了排队网络的内容.正因为有很多学者投入到此项研究中,新的结果是层出不穷的.本文简短地介绍G-网络近年来的发展.     

Generation of red light at 660 nm by frequency doubling a Nd:YAG laser with periodically-poled stoichiometric LiTaO<Subscript>3</Subscript>

High power red light was generated from a periodically-poled stoichiometric LiTaO₃ (PPSLT) by single-pass frequency doubling of a diode-side-pumped, Q-switched Nd:YAG laser at 1319 nm. An average power of 2.4 W of the 660 nm red light was obtained at the fundamental power of ∼5.4 W with the conversion efficiency up to 44.4% and with low fluctuation down to 2%. The high efficiency and stability at the red output indicate that it is a practical method to construct a reliable compact red laser. PACS 42.70.Mp; 42.79.Nv; 42.55.Xi     

Structural characterization and ferromagnetic behavior of Fe-doped TiO2 powder by high-energy ball milling

Fe-doped TiO₂ powder was prepared by high-energy ball milling, using TiO₂ Degussa P-25 and α-Fe powders as the starting materials. The structure and magnetic properties of the Fe-doped TiO₂ powder were studied by X-ray diffraction, ⁵⁷Fe Mossbauer spectroscopy and vibrating sample magnetometer. The Reitveld refinement of XRD revealed that ball milling not only triggered incorporation of Fe in TiO₂ lattice but also induced the phase transformation from anatase to rutile in TiO₂ and consequently the milled Fe-doped TiO₂ powder contained only rutile.⁵⁷Fe Mössbauer effect measure showed that Fe atoms existed in Fe²⁺ and Fe³⁺ state, which were assigned to the solid solution Fe_xTi_1−xO₂. The magnetization measurements indicated that the milled Fe-doped TiO₂ powder was ferromagnetic above room temperature. The ferromagnetism in our milled Fe-doped TiO₂ powder seemingly does not come from Fe and iron oxides particles/clusters but from the Fe-doped TiO₂ powder matrices.