固相萃取-气相色谱-质谱分析肉样中盐酸克伦特罗的残留量

建立了固相萃取 气相色谱 质谱联机分析肉样中盐酸克伦特罗残留量的方法。对盐酸克伦特罗在C1 8和离子交换固相萃取柱上的保留行为进行了研究 ,发现不同浓度盐酸克伦特罗的固相萃取回收率在 75 %～ 95 %之间 ;肉样中的加标回收率在 70 %～ 83 % ;相对标准偏差在 4 .95 %～ 1 3 .4 % ;最低检出限为 1 μg kg。盐酸克伦特罗的硅烷化产物 ,采用选择离子的模式进行检测 ( 86、2 4 3、2 62、2 77) ,衍生物的峰面积与样品浓度在0 .0 0 2 5 2～ 2 .0 2mg L范围内呈良好的线性关系 ,线性回归系数大于 0 .9999。     

ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.     

Single Atom Alloy Preparation and Applications in Heterogeneous Catalysis

There have been remarkable progresses in manipulating heterogeneous catalysts' nanostructures in the past decade. The concept of single atom alloy (SAA) was firstly proposed in 2012 when researchers successfully stabilized single Pd atoms on the Cu(111) surface. However, earlier work in 2009, which focused on replacing one Au atom with a Pd atom in thiolate protected Au₂₅ nanoclusters, could also be considered as the pioneer work of single atom alloy. Both kinds of single atom alloys exhibited the potential of maximum utilization of scarce elements and attractive catalytic performances. The well‐defined structures of SAA catalysts make accurate modeling possible, which further realizes the rational design of single atom alloy catalysts. In this review, we summarize the research trajectory of single atom alloys as well as recent achievements in this field. We also introduce several commonly adopted characterization methods for SAA catalysts such as scanning tunneling microscopy (STM), temperature programmed reaction (TPR), extended X‐ray absorption fine structure (EXAFS) spectra, matrix assisted laser desorption/ionization mass spectrum (MALDI‐MS) and differential pulse voltammetry (DPV). Through discussing recent progresses in SAA catalysts, we propose that future researches in this filed should be focused on exploring new kinds of metal nanocrystals and controlling the nanostructure of SAA even more precisely.     

2-芳基硫杂脯氨酸结构特征的研究

对12种2-芳基硫杂脯氨酸进行了红外光谱和核磁共振谱测定,对其中两个化合物作了质谱测定。结果表明,这类化合物固态时主要以两性离子形式存在;有较强的分子离子峰,是一类较稳定的化合物。它们还存在一对非对映异构体,芳环上的取代基对芳环电子云密度的影响较大,而对四氢噻唑环的影响较小。     

真空下X2 (X=Cl、Br)与AgOCN气-固反应机理

在真空条件下完成了X2 (X=Cl、Br)与AgOCN间的气-固异相反应，利用紫外光电子能谱（PES）仪，探测与确定反应产物是XNCO (X=Cl、Br)，并推断其可能为一过渡态反应，生成中间络合物，新键产生与旧键断裂同时进行.     

表面热电离质谱的进展

本文评述了表面热电离质谱（ＴＩＭＳ），特别是负离子质谱（ＮＴＩ－ＭＳ）对非金属和具有高电离电位的金属元素的同位素测定的进展，引用文献３４篇。     

载铂铝交联蒙脱土的烷烃芳构化特性──Ⅰ．载铂铝交联蒙脱土对烷烃的择形芳构化作用

对比考察了Ｐｔ／ＫＬ沸石，Ｐｔ／Ａｌ２Ｏ３和载铂铝交联蒙脱土（Ｐｔ／Ａｌ－ＣＬＭ）催化剂对不同碳原子数烷烃的芳构化特性．脉冲微反的评价结果表明：Ｐｔ／Ａｌ－ＣＬＭ比Ｐｔ／Ａｌ２Ｏ３和Ｐｔ／ＫＬ具有较高的转化ｎ－Ｃ８，ｎ－Ｃ９为其对应芳烃的选择性，在转化ｎ－Ｃ８时，产物中的间、对位二甲苯收率很高，而转化ｎ－Ｃ９时有高的正丙苯收率．采用１２９Ｘｅ－ＮＭＲ、ＸＲＤ和孔分布测定考察了Ｐｔ／Ａｌ－ＣＬＭ和Ｐｔ／ＫＬ、Ｐｔ／Ａｌ２Ｏ３之间孔结构的差异．结果表明：由于ｎ－Ｃ８，ｎ－Ｃ９在反应过程中其过渡态的极限尺寸与Ｐｔ／Ａｌ－ＣＬＭ０．９ｎｍ左右的层间域相匹配，因而它对ｎ－Ｃ８，ｎ－Ｃ９具有择形芳构化作用．     

有机镓、铟芳酰腙配合物的制备与结构表征

通过芳酰腙与三甲基镓或三甲基铟的反应,制备得到了七个有机镓或铟的镓芳酰腙配合物,在配合物中金属直接与芳酰腙的氧和烯胺氮成键,形成五元环状分子内配合物。对得到的化合物通过元素分析、红外光谱、质子核磁共振和质谱进行了结构表征。     

喹喔啉—2,3—二甲酰胺与3d过渡金属配合物的合成及性质研究

首次合成了喹喔啉－２，３－二甲酰胺（Ｑｘｄａ）与３ｄ过渡金属的三种固体配合物：Ｍ（Ｑｘｄａ）２ｃｌ２（Ｍ＝Ｃｏ（Ｉ），Ｎｉ（Ｉ），Ｃｕ（Ⅱ）。通过元素分析，摩尔电导，红外光谱，电子光谱，磁化率，热分析等手段对配合物的组成和性质进行了研究。