SiO2-羟基表面上金属原子的第一性原理研究

采用第一性原理方法研究了SiO2-羟基表面上几种金属原子的吸附性质,发现In和Ga在SiO2-羟基表面上的结合很弱,而Fe,Co,Ni在该表面上与Si,O形成强的化学键.等势能面和扩散势垒计算表明In(Ga)的扩散激活能只有0.1-0.3 eV,表明这两种原子容易在表面上扩散.这些结果可以定性地解释纳米合成中的一些实验现象.     

Flat-top interleavers with chromatic dispersion compensator based on phase dispersive free space Mach-Zehnder interferometer

In this paper, novel interleavers using circular cavities (CC) in a Mach-Zehnder interferometer (MZI) has been presented and demonstrated for the first time, in which CCs act as phase dispersive mirrors which exhibit a periodic dependence on the frequency of light. Three implementation schemes have been proposed and investigated. Theoretical analysis shows the spectral characteristics of each scheme in a 50-GHz channel spacing application. Furthermore, the chromatic dispersion (CD) of each output comb can be flattened within passband by appending an additional CC. The result shows that the proposed designs with novel interferometer technique can simultaneously provide flat top passbands, high isolation stopband and low CD value as well.     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

Dispersion Compensation in Externally Modulated Transmission System Using Chirped Fiber Grating

We present an externally modulated NTSC AM-VSB erbium-doped fiber amplifier (EDFA)-repeated system in the 1550 nm region which uses a chirped fiber grating (CFG) as a dispersion compensation device. In contrast to the conventional externally modulated fiber optical CATV systems, either with or without dispersion compensation fiber (DCF), good performances of carrier-to-noise ratio (CNR) ≥50 dB, composite second order (CSO) ≥74 dB, and composite triple beat (CTB) ≥65 dB were achieved for the full channel band after a 100-km single-mode fiber (SMF) transmission.     

Design and Experimental Characterization of Low‐Volume PM10/2.5/1.0 Trichotomous Sampler Inlet

This paper presents the development and laboratory evaluation of a PM10/2.5/1.0 trichotomous sampling inlet that consists of two main parts: a previously designed PM10 size‐selective inlet part and a PM2.5/1.0 two‐stage virtual impactor, which was newly fabricated and attached serially to the PM10 size selective inlet part. Particles are collected in three locations through the trichotomous sampling inlet to provide for not only particle concentration measurements of PM10, PM2.5 and PM1.0, but also those of PM2.5–10 and PM1.0–2.5.     

Tchebychev acceleration technique for large scale nonsymmetric matrices

Summary The acceleration by Tchebychev iteration for solving nonsymmetric eigenvalue problems is dicussed. A simple algorithm is derived to obtain the optimal ellipse which passes through two eigenvalues in a complex plane relative to a reference complex eigenvalue. New criteria are established to identify the optimal ellipse of the eigenspectrum. The algorithm is fast, reliable and does not require a search for all possible ellipses which enclose the spectrum. The procedure is applicable to nonsymmetric linear systems as well.     

A Lagrangean heuristic algorithm for disassembly scheduling with capacity constraints

This paper considers the problem of determining the disassembly schedule (quantity and timing) of products in order to satisfy the demand of their parts or components over a finite planning horizon. The objective is to minimize the sum of set-up, disassembly operation, and inventory holding costs. As an extension of the uncapacitated versions of the problem, we consider the resource capacity restrictions over the planning horizon. An integer program is suggested to describe the problem mathematically, and to solve the problem, a heuristic is developed using a Lagrangean relaxation technique together with a method to find a good feasible solution while considering the trade-offs among different costs. The effectiveness of the algorithm is tested on a number of randomly generated problems and the test results show that the heuristic suggested in this paper can give near optimal solutions within a short amount of computation time.     

Theoretical STM images of alkaline-earth metal adsorbed Si(1 1 1)3 × 2 surfaces

We have performed total-energy calculations to study theoretical scanning tunneling microscopy (STM) images of the Si(1 1 1)3 × 2 surfaces induced by the adsorption of alkaline-earth metals (AEMs). Previously, in a series of works on Ba/Si(1 1 1) system, we have found that the observed Si(1 1 1)3 × 1-Ba LEED phase indeed has a 3 × 2 periodicity with a Ba coverage of 1/6 ML and the HCC substrate structure. Based on results of the Ba case, we proposed that the HCC structure is also adopted for other AEM atoms, which was confirmed by our recent work. In this paper, we mainly report the STM simulations for different AEM systems to compare with existing experimental data. We discuss the difference in the detailed STM images for different AEM adsorbates. Especially, the difference in filled-state images between Mg and other AEM atoms is attributed to the strong Mg-Si interaction.     

无催化纳米氧化锌的制备及其光学性质研究

本文采用无催化剂直接蒸发高纯Zn粉,在800℃氧气氛条件下,在Si(111)衬底上生长得到以四角状为主的纳米ZnO(T-ZnO)。T-ZnO纳米线每个角约互成110°,长度约为1.5μm,直径100nm左右;Raman分析表明E2(H)普遍存在于各形态的ZnO;光致发光光谱表明,T-ZnO纳米线的光致发光除了与材料性质有关,还与杂质缺陷有关,蓝绿光带是ZnO的缺陷产生的。     

High-pressure effect on the crystal and magnetic structure of LuMnO3: Correlation between a distortion of the triangular lattice and the symmetry of the magnetic state in hexagonal frustrated manganites

The effect of a high pressure (up to 6 GPa) on the crystal and magnetic structure of the hexagonal manganite LuMnO₃ is studied by neutron diffraction in the temperature range 10–295 K. It is found that, as the pressure increases, the ordered magnetic moment of Mn ions at T = 10 K decreases noticeably from 2.48 (0 GPa) to 1.98 μ_B (6 GPa). This decrease is due to an enhancement of the geometrical frustration effects on the triangular lattice. At the same time, the symmetry of the triangular antiferromagnetic state (the irreducible representation Γ₂) remains unchanged. A correlation is revealed between the distortion parameter of the triangular lattice formed by Mn ions and the symmetry of the antiferromagnetic state of hexagonal manganites RMnO₃. Based on this correlation, a generalized magnetic phase diagram of these compounds is constructed. The obtained phase diagram provides an explanation for the changes observed in the magnetic state of hexagonal manganites caused by high pressure and chemical substitution.