In Vitro Antineoplastic and Antiviral Activity and In Vivo Toxicity of Geum urbanum L. Extracts

This study evaluated the in vitro antineoplastic and antiviral potential and in vivo toxicity of twelve extracts with different polarity obtained from the herbaceous perennial plant Geum urbanum L. (Rosaceae). In vitro cytotoxicity was determined by ISO 10993-5/2009 on bladder cancer, (T-24 and BC-3C), liver carcinoma (HEP-G2) and normal embryonic kidney (HEK-293) cell lines. The antineoplastic activity was elucidated through assays of cell clonogenicity, apoptosis induction, nuclear factor kappa B p65 (NFκB p65) activation and total glutathione levels. Neutral red uptake study was applied for antiviral activity. The most promising G. urbanum extract was analyzed by UHPLC–HRMS. The acute in vivo toxicity analysis was carried out following OEDC 423. The ethyl acetate extract of aerial parts (EtOAc-AP) exhibited the strongest antineoplastic activity on bladder cancer cell lines (IC₅₀ = 21.33–25.28 µg/mL) by inducing apoptosis and inhibiting NFκB p65 and cell clonogenicity. EtOAc and n-butanol extracts showed moderate antiviral activity against human adenovirus type 5 and human simplex virus type I. Seventy four secondary metabolites (gallic and ellagic acid derivatives, phenolic acids, flavonoids, etc.) were identified in EtOAc-AP by UHPLC–HRMS. This extract induced no signs of acute toxicity in liver and kidney specimens of H-albino mice in doses up to 210 mg/kg. In conclusion, our study contributes substantially to the detailed pharmacological characterization of G. urbanum, thus helping the development of health-promoting phytopreparations.     

Charge transport and contact resistance in coplanar devices based on colloidal polyaniline dispersion

The charge transport properties of thin films prepared from colloidal dispersion of polyaniline stabilized by poly(N‐vinylpyrrolidone) (PANI/PVP) have been investigated. The electrical characterization of coplanar device comprising of gold electrodes and PANI/PVP film deposited by spin coating served to gain insights into the contact and bulk resistance. The films prepared from PANI/PVP colloidal dispersion show high stability over a large temperature range. Temperature dependent measurements in the range from 90 to 350 K reveal that the charge transport can be described by a three‐dimensional variable‐range hopping mechanism as the dominant mode in the films. The stability of the films cast from dispersion within a large temperature range opens the possibility of the application as a polymer semiconductor layer in sensors and charge‐transport interlayer in organic solar cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1710–1716     

Control of a photoswitching chelator by metal ions: DFT,NBO, and QTAIM analysis

Ability of aroylhydrazones to change conformation upon interaction with light makes them promising candidates for molecular switches. Isomerization can be controlled through complexation with selected metal ions which bind with different affinity. N′‐[1‐(2‐hydroxyphenyl)ethyliden]iso‐nicotinoylhydrazide (HAPI) is an example of a dual‐wavelenght photoswitching molecule, whose complexation with metal ions was recently experimentally investigated (Franks et al. J. Inorg. Chem. 2014, 53, 1397). In this contribution, complexes between HAPI and K⁺, Ca²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Cu⁺, Cu²⁺, and Zn²⁺ ions were investigated using Density Functional Theory, Natural Bond Order analysis, and Quantum Theory of Atoms in Molecules. The most important parameters that determine complex stability are found to be ion radius and charge transferred from ligands to the ion: smaller ion radii and larger CT values characterize formation of more stable complexes. Our results explain experimentally observed effect of different metal ions on photoisomerization through determination of metal ion affinity (MIA): photoisomerization is inhibited if MIA exceeds 100 kcal/mol; for MIA between 50 and 100 kcal/mol excess of metal ions prevents isomerization, whereas in case of MIA below 50 kcal/mol metal ions have no influence on light–HAPI interaction. © 2015 Wiley Periodicals, Inc.     

Cyclic trihydroxamic acid derivatives

In the crystal structures of two cyclic trihydroxamic acid derivatives containing the same substructure unit, viz. 1,3,5‐trihydroxy‐1,3,5‐triazinane‐2,4,6‐trione dihydrate, C₃H₃N₃O₆·2H₂O, (I), and 1,3,5‐benz­yloxy‐1,3,5‐triazinane‐2,4,6‐trione, C₂₄H₂₁N₃O₆, (II), there is no significant difference in the geometric parameters. In (I), there are 11 hydrogen bonds of the O—H⋯O type inter­connecting the mol­ecules in a three‐dimensional network, while in (II) there are only two weak C—H⋯O hydrogen bonds. The results of IR spectroscopic analysis are in good agreement with the crystallographic study.     

Spectrophotometric method for the determination of demeclocycline using sodium molybdate as analytical reagent

By means of spectroscopic methods it has been found that demeclocycline reacts with molybdate ions forming a complex compound [MoO₃HDMTC]^2–. The relative stability constant of this compound has been determined by applying spectrophotometric methods. Under optimum conditions for complex formation a very sensitive spectrophotometric method for the estimation of demeclocycline in the concentration range 5.0–35.1 g/ml is proposed. The detection limit of the method is 2.5 g/ml of demeclocycline. The relative standard deviation (n=10) varies between 0.76% and 1.46%. The method proved to be accurate and sensitive for the analysis of the demeclocycline content in tablets.     

Determination of pefloxacin in serum and pharmaceutical forms by derivative spectrophotometry

A method for the direct determination of pefloxacin in serum and pharmaceutical forms (tablets and ampoules) has been developed, based on the use of second-order derivative ultraviolet spectra. Spectrophotometric assay of pefloxacin in tablets and ampoules was carried out in 0.1 mol/L NaOH, while in serum it was performed in 0.1 mol/L NaOH with the addition of sodium dodecylsulfate, in 337–347 nm wavelength range. Linear calibration curves were obtained in the concentration ranges 2–30g/mL pefloxacin for tablets and ampoules and 0.12–5 g/ mL for serum samples. Relative error of determination, as criterion for accuracy, was less than 1%, while the precision was better than 4 ng/ml. The minimum detectable concentration of pefloxacin in serum was 15 ng/mL.     

Analysis of flammability and smoke emission of rigid polyurethane foams modified with nanoparticles and halogen-free fire retardants

Using one-step method, rigid polyurethane foams were made, modified with developed fire retardant systems containing halogen-free flame retardants and nanofillers in the form of multi-walled carbon nanotubes or nanoscale titanium dioxide. The materials were subjected to a test using a cone calorimeter and smoke-generating chamber, and selected samples were further analyzed via thermogravimetry and oxygen index. Moreover, the products of thermal degradation of selected samples were identified using gas chromatography with mass spectrometer. Conducted flammability tests confirmed the presence of a synergistic effect between the used nanofillers and halogen-free flame retardants. It has been observed that the carbonized layer, the formation of which favored the presence of nanoadditives, inhibits the combustion process. Furthermore, nanofillers influenced favorably reduction in the amount and the number of occurring products of thermal degradation.     

Validated Stability-Indicating GC-MS Method for Characterization of Forced Degradation Products of Trans-Caffeic Acid and Trans-Ferulic Acid

When dealing with simple phenols such as caffeic acid (CA) and ferulic acid (FA), found in a variety of plants, it is very important to have control over the most important factors that accelerate their degradation reactions. This is the first report in which the stabilities of these two compounds have been systematically tested by exposure to various different factors. Forced degradation studies were performed on pure standards (trans-CA and trans-FA), dissolved in different solvents and exposed to different oxidative, photolytic and thermal stress conditions. Additionally, a rapid, sensitive, and selective stability-indicating gas chromatographic-mass spectrometric method was developed and validated for determination of trans-CA and trans-FA in the presence of their degradation products. Cis-CA and cis-FA were confirmed as the only degradation products in all the experiments performed. All the compounds were perfectly separated by gas chromatography (GC) and identified using mass spectrometry (MS), a method that additionally elucidated their structures. In general, more protic solvents, higher temperatures, UV radiation and longer storage times led to more significant degradation (isomerization) of both trans-isomers. The most progressive isomerization of both compounds (up to 43%) was observed when the polar solutions were exposed to daylight at room temperature for 1 month. The method was validated for linearity, precision as repeatability, limit of detection (LOD) and limit of quantitation (LOQ). The method was confirmed as linear over tested concentration ranges from 1−100 mg L⁻¹ (r²s were above 0.999). The LOD and LOQ for trans-FA were 0.15 mg L⁻¹ and 0.50 mg L⁻¹, respectively. The LOD and LOQ for trans-CA were 0.23 mg L⁻¹ and 0.77 mg L⁻¹, respectively.     

Toward the synthesis of incargranine B and seneciobipyrrolidine. Synthesis of octahydro-dipyrroloquinoline skeleton via dipolar cycloaddition/amination sequence

Octahydro-dipyrroloquinoline skeleton is the building component of a very few naturally occurring compounds. Nevertheless, these natural products have been attractive synthetic targets, and their study commanded development of efficient synthesis of this core. While the reported methods are based on the dimerization procedure of N-arylpyrrolidines of N-arylhomopropargyl amines, our approach relay on dipolar cycloaddition/amination sequence. This strategic approach allows sequential introduction of aromatic moieties increasing the product diversity and hence may be useful in further exploration of incargranine B or seneciobipyrrolidine derivatives.     

The Effect of Olive Fruit Fly Bactrocera oleae (Rossi) Infestation on Certain Chemical Parameters of Produced Olive Oils

Olives affected by active and damaging infestation (olive fruit fly Bactrocera oleae (Rossi)) were assayed for their chemical composition. Biophenols were determined by HPLC, sterols, triterpenic dialcohols, and fatty acids by gas chromatography analysis. The acquired data were statistically analyzed. Oils produced from “Istrska belica” fruit affected by active infestation compared to the oils made from fruit affected by damaging infestation showed higher amounts of total oleuropein biofenols (377.3 versus (vs.) 106.6 mg/kg), total biophenols (755 vs. 377 mg/kg), lignans (85.3 vs. 32.9 mg/kg), the dialdehydic form of decarboxymethyl oleuropein aglycone (DMO-Agl-dA) (148.3 vs. 49.0 mg/kg), its oxidized form (DMO-Agl-dA)ox (35.2 vs. 8.5 mg/kg), the dialdehydic form of oleuropein aglycone (O-Agl-dA) (61.1 vs. 8.0 mg/kg), the dialdehydic form of ligstroside aglycone (L-Agl-dA) (63.5 vs. 28.0 mg/kg), the aldehydic form of oleuropein aglycone (O-Agl-A) (40.6 vs. 8.4 mg/kg), and lower amounts of tyrosol (Tyr) (6.0 vs. 13. 9 mg/kg) and the aldehydic form of ligstroside aglycone (L-Agl-A) (13.8 vs. 40.3 mg/kg). Higher values of stigmasterol (2.99%) and lower values of campesterol (2.25%) were determined in oils affected by damaging infestation; an increase in triterpenic dialcohols was also observed (3.04% for damaging and 1.62% for active infestation). Oils affected by damaging infestation, compared to active infestation, showed lower amounts of oleic acid (73.89 vs. 75.15%) and higher amounts of myristic (0.013 vs. 0.011%), linoleic (7.27 vs. 6.48%), and linolenic (0.74 vs. 0.61%) acids.