Cover Image

The novel heteronuclear complexes [{cis-PtCl (NH₃)(μ-pyrazine)ZnCl (terpy)}](ClO₄)₂ (Pt-L1-Zn) and [{cis-PtCl (NH₃)(μ-4,4′-bipyridyl)ZnCl (terpy)}](ClO₄)₂ (Pt-L2-Zn) (where terpy = 2,2′:6′,2′′-terpyridine, L1 = pyrazine, L2 = 4,4′-bipyridyl) were synthesized and characterized. The pK_a values were determined, and based on them it was established that the π-acceptor ability of the pyrazine bridging ligand is more affective on lower pK_a values. The kinetic measurements of the substitution reactions with biologically relevant ligands, such as guanosine-5′-monophosphate (5′-GMP), inosine-5′-monophosphate (5′-IMP) and glutathione (GSH), were studied at pH 7.4. The reactions were followed under pseudo-first-order conditions by UV–Vis spectrophotometry. The order of reactivity of the investigated biomolecules for the first reaction is 5′-GMP > 5′-IMP > GSH, while for the second is 5′-IMP > GSH. Pt-L1-Zn complex is more reactive than Pt-L2-Zn. The cytotoxic activity of heteronuclear Pt-L1-Zn and Pt-L2-Zn complexes was determined on human colorectal cancer cell line (HCT-116) and human breast cancer cell line (MDA-MB-231). Both complexes significantly reduced cell viability on tested cell lines and exerted significant cytotoxic effects, with better effect on HCT-116 cells than cisplatin, especially after 72 hr (IC₅₀ < 0.52 μM). The Pt-L2-Zn complex showed higher activity against human breast cancer cells (MDA-MB-231) than cisplatin after 72 hr. The higher reactivity toward DNA constituent and significant cytotoxic activity may be attributed to the different geometry, Lewis acidity of different metal centers, as well as, to choice of bridging ligands.     

Theoretical investigation on 1H and 13C NMR chemical shifts of small alkanes and chloroalkanes

Using density functional theory (DFT) with the B3LYP, PBE, and PBE0 exchange-correlation functionals as well as the Moller-Plesset second-order perturbation theory (MP2) combined with a series of rather extended basis sets, 1H and 13C chemical shifts of small alkanes and chloroalkanes (with different numbers of chlorine atoms on specific positions) have been simulated and compared to experimental data. For the 1H chemical shifts, theory tends to reproduce experiment within the limits of the experimental errors. In the case of 13C chemical shift, the differences between theory and experiment increase monotonically with the number of chlorine atoms and exhibit a deviation from additivity. This behavior is related to the saturation of the experimental 13C chemical shifts with the number of chlorine atoms, whereas the evolution is mostly linear at both DFT and MP2 levels of approximation. This difference has been traced back to the relativistic spin-orbit coupling effects, which are exalted as a result of the enhancement of the s character of the C atom when increasing the number of linked Cl atoms. Thus, it was demonstrated that not only electron correlation but also relativistic effects have to be considered for estimating the 13C chemical shifts when several Cl atoms are directly attached to the C atom. Linear (theory/experiment) regressions have then been performed for the different types of C atoms, i.e., bearing one, two, and three Cl atoms, with excellent correlation coefficients. The linear correlation relationships so obtained can then serve to predict and facilitate the interpretation of the nuclear magnetic resonance spectra of more complex compounds. Furthermore, by investigating the basis set effects, the correlation between the chemical shifts calculated using the 6-311 + G(2d,p) basis set and the more extended 6-311 + G(2df,p) and aug-cc-pvtz basis sets is excellent, demonstrating that the choice of the 6-311 + G(2d,p) basis set for calculating the 1H and 13C chemical shifts is relevant.     

Possibilities and limitations of fast GC with narrow-bore columns

In this work, two narrow-bore capillary columns with different internal diameters (I.D.) 0.15 mm (15 m length, 0.15 microm film thickness) and 0.10 mm (10 m length, 0.10 microm film thickness) with the same stationary phase (5% diphenyl 95% dimethylsiloxane), phase ratio and separation power were compared with regard to their advantages, practical limitations and applicability in fast GC on commercially available instrumentation. The column comparison concerns fast GC method development, speed and separation efficiency, the sample transfer into the column utilizing split and splitless inlet, sample capacity, detection (analysing compounds of a wide range of polarities and volatilities--even n-alkanes C16-C28 and selected pesticides) and ruggedness (in the field of ultratrace analysis of pesticide residues in real matrix). Under conditions corresponding to speed/separation efficiency trade-off 0.10 mm I.D. versus 0.15 mm I.D. column provides a speed gain of 1.74, but all other parameters investigated were better for the 0.15 mm I.D. column concerning more efficient sample transfer from inlet to the column using splitless injection, no discrimination with split injection. Better sample capacity (three times higher for the 0.15 mm than for the 0.10 mm I.D. column) resulted in improved ruggedness and simpler fast GC-MS method development.     

Novel polycarbonate-based polyurethane elastomers: Composition–property relationship

Novel all-aliphatic polycarbonate-based polyurethane (PC-PU) elastomers, as well as PC-PU nanocomposites filled with organic-modified clays were synthesized, characterized and studied. It was found that they have very attractive mechanical properties (e.g., elongation at break between 600% and 800%). The prepared PC-PUs possess a distinctly segmented structure, which is the key prerequisite for their behavior as strong physical rubbery networks. All synthesized materials melt at elevated temperatures (between 110 and 200 °C) and hence can be processed like normal thermoplastics. The dispersion of the clay nanofiller was achieved by its one day swelling in the alcohol and a brief successive stirring. This procedure is very successful and leads to a partial exfoliation of the clay (documented by X-ray diffraction and TEM). The best nanocomposites with very good tensile properties, particularly with significantly increased moduli were obtained using the bentonite nanofiller. The study shows that the nanofiller interacts strongly with the hard domains and influences their melting temperature (DMTA and DSC), but it does not affect the glass transition temperature of soft domains. While Cloisite 15A was found to interact preferentially with the hard domains, the organic modified bentonite shows a strong interaction with both soft and hard segments, behaving as a blending agent. Hard domains in neat matrices, formed by hydrogen bonding of hard segments, were practically invisible by X-ray or TEM, but were successfully detected by AFM. Besides excellent mechanical properties, the prepared elastomers and their nanocomposites showed an interesting phase behavior (which was studied by combining DMTA and modulated DSC).     

Wettability conversion on the liquid flame spray generated superhydrophobic TiO2 nanoparticle coating on paper and board by photocatalytic decomposition of spontaneously accumulated carbonaceous overlayer

Titanium dioxide (TiO₂) is a photoactive material with various interesting and useful properties. One of those is the perfect wettability of TiO₂ surface after ultraviolet (UV) illumination. Wettability of a solid surface plays an important role in the field of printing, coating, and adhesion among others. Here we report on a superhydrophobic and photoactive liquid flame spray (LFS) generated TiO₂ nanoparticle coating that can be applied on web-like materials such as paper and board in one-step roll-to-roll process. The LFS TiO₂ nanoparticle coated paper and board were superhydrophobic instantly after the coating procedure because of spontaneously accumulated carbonaceous overlayer on TiO₂, and thus there was no need for any type of separate hydrophobization treatment. The highly photoactive LFS TiO₂ nanoparticle coating could be converted steplessly from superhydrophobic to superhydrophilic by UV-illumination, and the coating gave strong response to natural daylight illumination even in the shade. The superhydrophobic LFS TiO₂ coated surface can be used as an intelligent substrate, where photo-generated hydrophilic patterns guide the fluid setting and figure formation. Our study reveals that the wettability changes on the LFS TiO₂ surface were primarily caused by the photocatalytic removal of the carbonaceous material from TiO₂ during the UV-illumination and spontaneous accumulation of the carbonaceous material on the surface of the metal oxide during storage in the dark. The latter mechanism was found to be a temperature activated process which could be significantly speeded up by heat treatment. If other mechanisms such as surface oxidization, increment of hydroxyl groups, or charge separation played a role in the wetting phenomena on TiO₂, their effect was rather secondary as the removal and accumulation of the carbonaceous material dominated the wettability changes on the surface. Our study gives valuable information on the complex issue of photo-induced wettability changes on TiO₂.     

Cyclic trihydroxamic acid derivatives

In the crystal structures of two cyclic trihydroxamic acid derivatives containing the same substructure unit, viz. 1,3,5‐trihydroxy‐1,3,5‐triazinane‐2,4,6‐trione dihydrate, C₃H₃N₃O₆·2H₂O, (I), and 1,3,5‐benz­yloxy‐1,3,5‐triazinane‐2,4,6‐trione, C₂₄H₂₁N₃O₆, (II), there is no significant difference in the geometric parameters. In (I), there are 11 hydrogen bonds of the O—H⋯O type inter­connecting the mol­ecules in a three‐dimensional network, while in (II) there are only two weak C—H⋯O hydrogen bonds. The results of IR spectroscopic analysis are in good agreement with the crystallographic study.     

Solid-state interactions and drug release of teicoplanin in binary combinations with peracetylated α-, β-, and γ-cyclodextrins

Triacetyl α-cyclodextrin, triacetyl β-cyclodextrin and triacetyl γ-cyclodextrin were tested as possible hydrophobic carriers to prolong the release of hydrophilic teicoplanin (TCP). Physical–chemical characterization of individual components, drug-carrier physical mixtures at 0.5, 0.67 and 0.75 mass fraction of carrier, and the respective interaction products by kneading or evaporative crystallization under microwave irradiation was carried out using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In vitro drug release in pH 7.4 phosphate buffer at 37 °C was determined by intrinsic dissolution rate (IDR) measurements on non disintegrating compressed discs. Solid-state interactions of TCP with triacetyl α-cyclodextrin by evaporative crystallization and kneading and with triacetyl β-cyclodextrin by evaporative crystallization (probably resulting in carrier amorphization) were demonstrated. The role of carrier hydrophobicity, carrier mass fraction and preparation method of solid drug-carrier combinations on solid-state drug-carrier interactions and slowing down of TCP release was assessed. Modulation of drug release can be achieved using TCP-triacetyl γ-cyclodextrin combinations at 0.5 mass fraction of carrier.     

TG-DTA-FTIR analysis and isoconversional reaction profiles for thermal and thermo-oxidative degradation processes in black chokeberry (<Emphasis Type="Italic">Aroniamelanocarpa</Emphasis>)

The thermal and thermo-oxidative processes in Aroniamelanocarpa (black chokeberry) were investigated using combined thermo-analytical (TG-DTA) and spectroscopic (FTIR) experimental techniques. Isoconversional analysis revealed that the process in an inert (argon) atmosphere was probably governed by chlorogenic acid degradation, where autocatalysis (described by the empirical ?esták-Berggren model) might occur due to water already present in the early stages of the process through hydrolysis. Thermal degradation is described by the intrinsic kinetic parameters, where the degradation rate increases proportionally with an increase in the heating rate. Under oxidative conditions, the process was found to be primarily driven by neochlorogenic acid degradation. The thermo-oxidative degradation of Aroniamelanocarpa fresh samples can be described by two competitive reactions, where it was established that a cyanidin-3-glucosylrutinoside degradation made a significant contribution to a comprehensive kinetics. This study showed the targeting of the neochlorogenic acid in Aroniamelanocarpa fresh samples to have a strong hydrogen-donating activity, thereby rendering it capable of very efficiently entrapping the peroxy radicals. Current research has demonstrated that the relative contribution of the two competitive reactions to the overall process is highly dependent on the heating rate of the system under consideration.     

Charge transport and contact resistance in coplanar devices based on colloidal polyaniline dispersion

The charge transport properties of thin films prepared from colloidal dispersion of polyaniline stabilized by poly(N‐vinylpyrrolidone) (PANI/PVP) have been investigated. The electrical characterization of coplanar device comprising of gold electrodes and PANI/PVP film deposited by spin coating served to gain insights into the contact and bulk resistance. The films prepared from PANI/PVP colloidal dispersion show high stability over a large temperature range. Temperature dependent measurements in the range from 90 to 350 K reveal that the charge transport can be described by a three‐dimensional variable‐range hopping mechanism as the dominant mode in the films. The stability of the films cast from dispersion within a large temperature range opens the possibility of the application as a polymer semiconductor layer in sensors and charge‐transport interlayer in organic solar cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1710–1716     

Control of a photoswitching chelator by metal ions: DFT,NBO, and QTAIM analysis

Ability of aroylhydrazones to change conformation upon interaction with light makes them promising candidates for molecular switches. Isomerization can be controlled through complexation with selected metal ions which bind with different affinity. N′‐[1‐(2‐hydroxyphenyl)ethyliden]iso‐nicotinoylhydrazide (HAPI) is an example of a dual‐wavelenght photoswitching molecule, whose complexation with metal ions was recently experimentally investigated (Franks et al. J. Inorg. Chem. 2014, 53, 1397). In this contribution, complexes between HAPI and K⁺, Ca²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Cu⁺, Cu²⁺, and Zn²⁺ ions were investigated using Density Functional Theory, Natural Bond Order analysis, and Quantum Theory of Atoms in Molecules. The most important parameters that determine complex stability are found to be ion radius and charge transferred from ligands to the ion: smaller ion radii and larger CT values characterize formation of more stable complexes. Our results explain experimentally observed effect of different metal ions on photoisomerization through determination of metal ion affinity (MIA): photoisomerization is inhibited if MIA exceeds 100 kcal/mol; for MIA between 50 and 100 kcal/mol excess of metal ions prevents isomerization, whereas in case of MIA below 50 kcal/mol metal ions have no influence on light–HAPI interaction. © 2015 Wiley Periodicals, Inc.