Urinary Metabolomics Study of Patients with Bicuspid Aortic Valve Disease

Bicuspid aortic valve (BAV) is the most common congenital heart defect responsible for valvular and aortic complications in affected patients. Causes and mechanisms of this pathology are still elusive and thus the lack of early detection biomarkers leads to challenges in its diagnosis and prevention of associated cardiovascular anomalies. The aim of this study was to explore the potential use of urine Nuclear Magnetic Resonance (NMR) metabolomics to evaluate a molecular fingerprint of BAV. Both multivariate and univariate statistical analyses were performed to compare the urinary metabolome of 20 patients with BAV with that of 24 matched controls. Orthogonal partial least squared discriminant analysis (OPLS-DA) showed statistically significant discrimination between cases and controls, suggesting seven metabolites (3-hydroxybutyrate, alanine, betaine, creatine, glycine, hippurate, and taurine) as potential biomarkers. Among these, glycine, hippurate and taurine individually displayed medium sensitivity and specificity by receiver operating characteristic (ROC) analysis. Pathway analysis indicated two metabolic pathways likely perturbed in BAV subjects. Possible contributions of gut microbiota activity and energy imbalance are also discussed. These results constitute encouraging preliminary findings in favor of the use of urine-based metabolomics for early diagnosis of BAV.     

Direct continuous supercritical fluid extraction as a novel method of wine analysis. Comparison with conventional indirect extraction and implications for wine variety identification

Direct supercritical fluid extraction (SFE) of wines with carbon dioxide was compared to SFE of the sorbent used for solid-phase extraction of the same wine samples (SPE-SFE). Compared to SPE-SFE, the direct SFE results in amore specific and representative gas chromatographic fingerprint of the wine sample. The multivariate statistical processing of the direct SFE-GC data provides a clear-cut and sharp discrimination among the individual wine varieties while the discrimination based on the SPE-SFE-GC data is relatively poor. This finding reflects the adverse effects of additional analyte-sorbent interactions and sorption/desorption steps involved in SPE-SFE.     

Determination of the Lipophilicity of Xanthines by Reversed-Phase Liquid Chromatography

JPC – Journal of Planar Chromatography – Modern TLC -     

Hybrid organic-inorganic coatings and films containing conducting polyaniline nanoparticles

Hybrid organic-inorganic coatings and free-standing films made from [3-(glycidyloxy)propyl]trimethoxysilane, amino-terminated poly(oxypropylene) (Jeffamine D-230), colloidal polyaniline nanoparticles and, in some cases, colloidal nanosilica were prepared and characterized. HCl or 4-methylbenzene-1-sulfonic acid were used as catalysts for the sol-gel process and pH tuning, water-propan-2-ol mixture as a solvent. Electrical and mechanical properties and surface morphology of films were studied. The coatings were blue and non-conducting, or green and conducting, depending on preparation conditions. They have a smoother surface than in-situ polymerized polyaniline films.     

Interaction of Naproxen with Crystalline and Amorphous Methylated β-Cyclodextrin in the Liquid and Solid State

Abstract

Interactions of naproxen (NAP) with amorphous, randomly methylated β-cyclodextrin at a degree of substitution per anhydroglucose unit of 1.8 (RAMEB) and with crystalline heptakis-(2,6-di-O-methyl)-β-cyclodextrin (DIMEB) were studied in aqueous solution and in the solid state using, respectively, phase-solubility analysis (at 25 °C, 37 °C and 47 °C) and differential scanning calorimetry (DSC) supported by X-ray powder diffractometry. RAMEB and DIMEB displayed similar solubilizing and complexing abilities towards NAP, suggesting analogous inclusion modes of the drug in the host cavity in aqueous solution. Differences were instead observed in interactions in the solid state, where the amorphizing capacity of RAMEB toward NAP (evaluated by DSC) was about twice that of DIMEB at each drug-to-carrier ratio. Assuming that inclusion complexation is also involved in solid-state interactions, molecular modelling accounted for the experimental results in terms of structural features of DIMEB, i.e. the particular inwards orientation of O-6-C-8 groups of three alternate glucoses on the primary hydroxyl side which hampers a deep penetration of NAP in the DIMEB cavity in the solid state. On the contrary, no obstruction of the cavity apparently occurs with RAMEB due its noncrystalline state. The aqueous dissolution rate of NAP from NAP-RAMEB and NAP-DIMEB blends containing 0.59, 0.73, 0.85, and 0.92 mass fraction of carrier linearly increased at decreasing drug-to-carrier ratios. The improvement was 5 to 20 times (from powders) and 50 to 200 times (from discs) the dissolution rate of NAP alone for both carrier. Therefore the choice of the amorphous RAMEB in pharmaceutical formulations can be recommended mainly for economic reasons, though the anhydrous and non-hygroscopic nature of crystalline DIMEB might be of particular advantage in case of moisture sensitive formulations.     

A differential microcalorimetric study of whey proteins and their behaviour in oil-in-water emulsions

Oil-in-water emulsions (20% soya oil, 1% protein) have been prepared containing lysozyme or isolates of -lactalbumin and β-lactoglobulin from whey protein. The structural characteristics of these proteins adsorbed at an oil/water interface were determined by following their thermal transitions using differential scanning microcalorimetry. Thermograms of the proteins in the adsorbed state differed markedly from the corresponding transitions seen for the proteins in solution. This suggests that the proteins underwent substantial changes in secondary and tertiary structure upon adsorption. In general, for all the proteins studied, a net decrease in the total energy absorbed during denaturation was found when the proteins were in an adsorbed state. Both lysozyme and -lactalbumin were in part “surface denatured”, and they showed a certain degree of reversibility between solution and the adsorbed state. β-Lactoglobulin showed the highest degree of denaturation upon adsorption and the conformational change was irreversible.     

A peptidomic approach for monitoring and characterising peptide cyanotoxins produced in Italian lakes by matrix-assisted laser desorption/ionisation and quadrupole time-of-flight mass spectrometry

In recent years, the occurrence of cyanobacterial blooms in eutrophic freshwaters has been described all over the world, including most European countries. Blooms of cyanobacteria may produce mixtures of toxic secondary metabolites, called cyanotoxins. Among these, the most studied are microcystins, a group of cyclic heptapeptides, because of their potent hepatotoxicity and activity as tumour promoters. Other peptide cyanotoxins have been described whose structure and toxicity have not been thoroughly studied. Herein we present a peptidomic approach aimed to characterise and quantify the peptide cyanotoxins produced in two Italian lakes, Averno and Albano. The procedure was based on matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry mass spectrometry (MALDI-TOF-MS) analysis for rapid detection and profiling of the peptide mixture complexity, combined with liquid chromatography/electrospray ionisation quadrupole time-of- flight tandem mass spectrometry (LC/ESI-Q-TOF-MS/MS) which provided unambiguous structural identification of the main compounds, as well as accurate quantitative analysis of microcystins. In the case of Lake Averno, a novel variant of microcystin-RR and two novel anabaenopeptin variants (Anabaenopeptins B(1) and Anabaenopeptin F(1)), presenting homoarginine in place of the commonly found arginine, were detected and characterised. In Lake Albano, the peculiar peptide patterns in different years were compared, as an example of the potentiality of the peptidomic approach for fast screening analysis, prior to fine structural analysis and determination of cyanotoxins, which included six novel aeruginosin variants. This approach allows for wide range monitoring of cyanobacteria blooms, and to collect data for evaluating possible health risks to consumers, through the panel of the compounds produced along different years.     

Search of ligands for the amyloidogenic protein beta2-microglobulin by capillary electrophoresis and other techniques

Beta2-microglobulin (beta2-m) is a small amyloidogenic protein normally present on the surface of most nucleated cells and responsible for dialysis-related amyloidosis, which represents a severe complication of long-term hemodialysis. A therapeutic approach for this amyloidosis could be based on the stabilization of beta2-m through the binding to a small molecule, and consequent inhibition of protein misfolding and amyloid fibril formation. A few compounds have been described to weakly bind beta2-m, including the drug suramin. The lack of a binding site for nonpolypeptidic ligands on the beta2-m structure makes it difficult for both the identification of functional groups responsible for the binding and the search of hits to be optimized. The characterization of the binding properties of suramin for beta2-m by using three different techniques (surface plasmon resonance, affinity CE (ACE), ultrafiltration) is here described and the results obtained are compared. The common features of the chemical structures of the compounds known to bind the protein led us to select 200 sulfonated/suramin-like molecules from a wider chemical library on the basis of similarity rules, so as to possibly single out some interesting hits and to gain more information on the functional groups involved in the binding. The development of screening methods to test the compounds by using ultrafiltration and ACE is described.     

Analysis of multiple mycotoxins in beer employing (ultra)-high-resolution mass spectrometry

The objective of the presented study was to develop and optimize a simple, high-throughput method for the control of 32 mycotoxins (Fusarium and Alternaria toxins, aflatoxins, ergot alkaloids, ochratoxins, and sterigmatocystin) in beer. Due to the broad range of their physicochemical properties, the sample preparation step was simplified as much as possible to avoid analyte losses. The addition of acetonitrile to beer samples enabled precipitation of abundant matrix components. The clean-up efficiency was controlled by ambient mass spectrometry employing a direct analysis in real time (DART) ion source. For determination of analytes, ultra-high-performance liquid chromatography hyphenated with high-resolution mass spectrometry utilizing an orbitrap (U-HPLC-orbitrapMS) or time-of-flight (TOFMS) technology was used. Because of significantly better detection capabilities of the orbitrap technology, the U-HPLC-orbitrapMS method was chosen as a determinative step and fully validated. To compensate matrix effects, matrix-matched calibration was employed. The lowest calibration levels for most of the target mycotoxins ranged from 1 to 8 μg L(-1) beer and the recoveries of analytes were in range from 86 to 124%.