An ab initio study of the vibronic, spin-orbit, and magnetic hyperfine structure in the X2Pi electronic state of NCO

In the present study we give the results of the ab initio calculations on the vibronic, spin-orbit, and magnetic hyperfine structure in the X (2)Pi electronic state of the NCO radical. The calculations of the potential surfaces and the electronic mean values of the hyperfine coupling constants are carried out by means of the density functional theory approach (B3LYP functional combined with an atomic orbital basis set suitable for calculations of the hyperfine structure). The vibronic levels, spin-orbit splitting, and the vibronic mean values of the components of the hyperfine tensor in the vibronic species are calculated using a variational method. The results of the calculations are in good agreement with the available experimental data.     

Chromatographic and column stability at pH 7 of a C18 dimethylurea polar stationary phase

Chromatographic evaluations of a C18 dimethylurea phase in 150 mm x 3.9 mm HPLC columns were performed using the Tanaka and Engelhardt test mixtures. The applicability of the new C18 dimethylurea phase was also evaluated with a mixture of some herbicides and their metabolites. An artificial aging procedure was also performed by passing a potassium phosphate mobile phase buffered at pH 7.0 through C18 50 mm x 3.9 mm dimethylurea columns. The column stability was evaluated by means of the chromatographic parameters obtained for the separation of some compounds from the Neue test mixture, using apolar, polar and highly basic analytes.     

Titanium as a chemical modifier for the determination of cobalt in marine sediments

The determination of cobalt in marine sediments by electrothermal atomic absorption spectrometry was studied using no modifier and magnesium and titanium as modifiers. Titanium is one of the major sediment constituents, which widely affects the cobalt determination and it was studied as a chemical modifier since it was the only concomitant that increased the cobalt signal in the concentration range usually found in sediments. The performance of Mg and Ti as chemical modifiers was compared relative to maximum pyrolysis and atomization temperatures, linear calibration range, sensitivity and matrix effects. The pyrolysis curves showed that the analyte could be stabilized up to 1400 °C when either Ti or Mg(NO₃)₂ was present, while only 1000 °C could be used in the absence of a modifier. The optimum atomization temperature was 2500 °C in all cases. Analytical curves were compared using no modifier, 5 μg Ti and 100 μg Mg(NO₃)₂ as modifiers, and the linear range found was up to approximately 4 ng Co whether a modifier was used or not. With Ti as a chemical modifier, analytical curves for cobalt in aqueous solution and in a synthetic matrix resulted in the same sensitivity (m₀=55 pg), whereas the use of Mg led to characteristic mass values of 59 and 72 pg in aqueous solution and in a synthetic matrix, respectively, showing some matrix effect. The detection limits (3σ, n=10) were 0.4 μg g⁻¹ using no modifier and 0.3 μg g⁻¹ with Ti as a modifier in the original matrix. A reference estuarine sediment NIST 1646 with a non-certified content of 10.5 μg g⁻¹ Co was analyzed and the found value of 10.9±2.4 μg g⁻¹, (n=3), using Ti as chemical modifier and calibration against aqueous standards, was in good agreement with the recommended value.     

Mechanism of action of 4-hydroxymethyl-1,6,8-trimethylfuro[2,3-h]quinolin-2(1H)-one, a very active angular furocoumarin-like sensitizer

The molecular structure of 1,4,6,8-tetramethylfuro[2,3-h]quinolin-2(1H)-one (FQ), a recent furocoumarin-like photosensitizer, has been modified with the aim of reducing its strong genotoxicity, by replacing the methyl group at 4 position with a hydroxymethyl one, and so obtaining 4-hydroxymethyl-1,6,8-trimethylfuro[2,3-h]quinolin-2(1H)-one (HOFQ). This modification gave rise to a strong reduction of lipophilicity and dark interaction with DNA. The formation of monoadducts (MA) was deeply affected, whereas the induction of bifunctional adducts between DNA and proteins (DPC(L>0)) was replaced by an efficient production of DNA-protein cross-links at zero length (DPC(L=0)), probably via guanine damage. Because of its angular molecular structure, HOFQ does not form interstrand cross-links (ISC): therefore, DPC(L=0) and MA represent the main lesions induced by HOFQ in DNA. In comparison with FQ (which induces MA and DPC(L>0)) and 8-methoxypsoralen (8-MOP) (MA, ISC, DPC(L>0)), HOFQ seems to be a more selective agent. In fact, contrary to FQ and 8-MOP, HOFQ, together with a noticeable antiproliferative activity, shows low levels of point mutations in bacteria and of clastogenic effects in mammalian cells. HOFQ is also an efficient apoptosis inducer, especially in comparison with 8-MOP, when tested at equitoxic experimental conditions; this property might be correlated with the complete HOFQ inability of inducing skin erythemas, a well-known side effect of classic furocoumarin photosensitization.     

Electron traps on oxide surfaces: (H+)(e-) pairs stabilized on the surface of 17O enriched CaO.

(H+)(e-) pairs generated at the surface of polycrystalline CaO are analyzed for the first time in terms of the interaction of the unpaired electron spin with the nuclear spin of the 17O anions of the surface. CaO crystals enriched in the 17O isotope are prepared and the corresponding hyperfine coupling constants are measured in electron paramagentic resonance (EPR) spectra. The results are analyzed on the basis of cluster model density functional theory calculations. The computed hyperfine coupling constants for (H+)(e-) pairs formed on the edge, corner, and reverse corner sites of the CaO surface allow a tentative assignment of two observed spectral features to specific morphological surface sites.     

Methylene‐Bridged Metallocenes with 2,2′‐Methylenebis[1H‐inden‐1‐yl] Ligands: Synthesis,Characterization, and Polymerization Catalysis of a Synthetically Simple Class of C2‐ and C2v‐Symmetric ansa‐Metallocenes

The acid‐catalyzed reaction between formaldehyde and 1H‐indene, 3‐alkyl‐ and 3‐aryl‐1H‐indenes, and six‐membered‐ring substituted 1H‐indenes, with the 1H‐indene/CH₂O ratio of 2 : 1, at temperatures above 60° in hydrocarbon solvents, yields 2,2′‐methylenebis[1H‐indenes] 1 – 8 in 50–100% yield. These 2,2′‐methylenebis[1H‐indenes] are easily deprotonated by 2 equiv. of BuLi or MeLi to yield the corresponding dilithium salts, which are efficiently converted into ansa‐metallocenes of Zr and Hf. The unsubstituted dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 1′ )]) is the least soluble in organic solvents. Substitution of the 1H‐indenyl moieties by hydrocarbyl substituents increases the hydrocarbon solubility of the complexes, and the presence of a substituent larger than a Me group at the 1,1′ positions of the ligand imparts a high diastereoselectivity to the metallation step, since only the racemic isomers are obtained. Methylene‐bridged ‘ansa‐zirconocenes’ show a noticeable open arrangement of the bis[1H‐inden‐1‐yl] moiety, as measured by the angle between the planes defined by the two π‐ligands (the ‘bite angle’). In particular, of the ‘zirconocenes’ structurally characterized so far, the dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[4,7‐dimethyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 5′ )] is the most open. The mixture [ZrCl₂( 1′ )]/methylalumoxane (MAO) is inactive in the polymerization of both ethylene and propylene, while the metallocenes with substituted indenyl ligands polymerize propylene to atactic polypropylene of a molecular mass that depends on the size of the alkyl or aryl groups at the 1,1′ positions of the ligand. Ethene is polymerized by rac‐dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1‐methyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 2′ )])/MAO to polyethylene waxes (average degree of polymerization ca. 100), which are terminated almost exclusively by ethenyl end groups. Polyethylene with a high molecular mass could be obtained by increasing the size of the 1‐alkyl substituent.     

Neutron powder diffraction study of A2BeF4 (A=K, Rb, Cs): Structure refinement and analysis of background

The crystal structure of potassium, rubidium and caesium fluoroberyllates have been re-examined by neutron powder diffraction at room temperature and at 1.5 K. Previously, their structures, obtained from X-ray data, were described in the Pn2₁a space group. However, the results obtained from Rietveld refinements, using powder neutron diffraction, at both temperatures, indicated that all structures are orthorhombic with space group Pnma. The known phase transition at high temperature is probably related to the appearance of a hexagonal pseudo-symmetry instead of the elimination of the mirror plane between the above mentioned orthorhombic space groups. A possible phase transition, at very low temperature, was discarded considering the stereochemical criteria concerning the structural stability of A₂BX₄ compounds. This was confirmed by thermal analysis. On the other hand, a modulated background has been detected in all samples during the refinements. This is compatible with the presence of an amorphous phase, coexisting with the crystalline phase, or with a disordered component within the main crystalline phase. Instead of using a polynomial function, the background was modelled by Fourier filtering improving the fit for all patterns. The radial distribution function (RDF) was obtained from the analysis of the calculated background and compared with the RDF from the average crystal structure. The advantages of neutron with respect to X-ray diffraction were evidenced for this type of compound with β-K₂SO₄-type structure.     

Alysis of the volatile constituents of food by headspace GC-MS with reversal of the carrier gas flow during sampling

A technique has been developed for performing headspace GC-MS analysis of volatile components of food, in which the carrier gas flow is reversed during sampling in order to overcome problems caused by the diffusion of substances not retained by the cold trap. Chromatographic profiles of volatile compounds from cheeses, obtained at room temperature, provide confirmation of the validity of the reversed flow technique, and the versatility of the system is evidenced by its successful application to both solid and liquid matrixes: the absence of any discrimination against the various components reveals its efficacy for compounds with a wide range of volatility. Addition of internal standards to the sample enables the use of the technique for quantitative analysis.     

Evaluation of tocopherol recovery through simulation of molecular distillation process

DISMOL simulator was used to determine the best possible operating conditions to guide, in future studies, experimental works. This simulator needs several physical-chemical properties and often it is very difficult to determine them because of the complexity of the involved components. Their determinations must be made through correlations and/or predictions, in order to characterize the system and calculate it. The first try is to have simulation results of a system that later can be validated with experimental data. To implement, in the simulator, the necessary parameters of complex systems is a difficult task. In this work, we aimed to determe these properties in order to evaluate the tocopherol (vitamin E) recovery using a DISMOL simulator. The raw material used was the crude deodorizer distillate of soya oil. With this procedure, it is possible to determine the best operating conditions for experimental works and to evaluated the process in the separation of new systems, analyzing the profiles obtained from these simulations for the falling film molecular distillator.     

Carbohydrate-based DNA ligands: sugar-oligoamides as a tool to study carbohydrate-nucleic acid interactions

Sugar-oligoamides have been designed and synthesized as structurally simple carbohydrate-based ligands to study carbohydrate-DNA interactions. The general design of the ligands 1-3 has been done as to favor the bound conformation of Distamycin-type gamma-linked covalent dimers which is a hairpin conformation. Indeed, NMR analysis of the sugar-oligoamides in the free state has indicated the presence of a percentage of a hairpin conformation in aqueous solution. The DNA binding activity of compounds 1-3 was confirmed by calf thymus DNA (ct-DNA) NMR titration. Interestingly, the binding of the different sugar-oligoamides seems to be modulated by the sugar configuration. Semiquantitative structural information about the DNA ligand complexes has been derived from NMR data. A competition experiment with Netropsin suggested that the sugar-oligoamide 3 bind to DNA in the minor groove. The NMR titrations of 1-3 with poly(dA-dT) and poly(dG-dC) suggested preferential binding to the ATAT sequence. TR-NOE NMR experiments for the sugar-oligoamide 3-ct-DNA complex both in D(2)O and H(2)O have confirmed the complex formation and given information on the conformation of the ligand in the bound state. The data confirmed that the sugar-oligoamide ligand is a hairpin in the bound state. Even more relevant to our goal, structural information on the conformation around the N-glycosidic linkage has been accessed. Thus, the sugar asymmetric centers pointing to the NH-amide and N-methyl rims of the molecule have been characterized.