Gas chromatographic/mass spectrometric determination of vinyl acetate levels in air

The determination of vinyl acetate at parts per 10⁹ by volume (ppbv) levels in air by gas chromatography/mass spectrometry (GC/MS) was achieved by optimizing the GC conditions and choosing specific extraction solvents that are sufficiently pure. The ideal solvent should not give rise to fragment ions at m/z 43, in order to rule out any possible interference during the monitoring of the same vinyl acetate ion. Traces of acetone and butan-2-one in solvents suitable for this GC/MS determination may also mislead the detection of vinyl acetate. A 440 μl volume of a mixture of tetrachloroethylene containing 9% acetonitrile allowed the recovery of more than 90% of the ester with a detection limit of 1.5 ppbv in air together with a good linearity of response.     

Determination of the Lipophilicity of Xanthines by Reversed-Phase Liquid Chromatography

JPC – Journal of Planar Chromatography – Modern TLC -     

Cation transport by a redox-active synthetic ion channel

The synthesis, cation binding and transmembrane conductive properties of a novel group of synthetic ion channels containing a redox-active centre are described. Experiments using a black lipid membrane preparation revealed that these compounds function effectively as ion channels. Subsequent 23Na NMR spectroscopy studies focused on a synthesized ion channel with a ferrocene centre. When incorporated in vesicular bilayers, this channel was demonstrated to support a Na+ flux that was at least six times faster than ion transport by monensin. Since oxidation of the ferrocene moiety completely inhibited the Na+ transport, the redox-active centre provides a potential mechanism for controlling ion flux.     

Inductively coupled plasma mass spectrometric determination of molybdenum in urine

A method was developed for the determination of molybdenum (Mo) in human urine by direct dilution of the sample in doubly distilled water with 1% HNO3 (v/v) and inductively coupled mass spectrometry (ICP-MS). In and Y were used as internal standards. Since (98)Mo provides a higher sensitivity, it was chosen as the reference isotope. The influence of different factors, such as sample dilution, HNO3 concentration and the stability of the analyte were evaluated. The detection limit (LOD) was assessed at 0.2 microg/L Mo, while the lower limit of quantification (LOQ) was 0.6 microg/L. Recoveries ranged between 97.2 and 100.7% from solutions containing from 10 to 50 microg/L Mo. Linear calibration curves were generated from 2.1 and 52.1 microg/L with coefficients of variation (CV ) ranging from 1.62 to 3.56%. In order to establish reference values (RV) for molybdenum, the procedure presented here was used to determine Mo in the urine of a population group living in Tuscany, Italy.     

Effect of core size on the partition of organic solutes in the monolayer of water-soluble nanoparticles: an ESR investigation

ESR spectroscopy has been used to study the interaction of para-pentylbenzyl hydroxyalkyl nitroxide with the monolayer of water-soluble protected gold clusters having a core diameter ranging from 1.6 to 5.3 nm. The solubilization of the nitroxide probe in the more hydrophobic environment of the monolayer strongly depends on the size of the gold core. In particular, the partition equilibrium constant increases as the nanoparticle diameter decreases. These results have been attributed to the different packing of the chains in the monolayer resulting from the different radius of curvature of the investigated nanoparticles. This represents, to the best of our knowledge, the first report demonstrating that the core size of metallic nanoparticles affects the solvating properties of the protective organic monolayer.     

Reaction of allylsilanes and allylstannanes with alkynes catalyzed by electrophilic late transition metal chlorides

The intramolecular reaction of allylsilanes and allylstannanes with alkynes proceeds catalytically in the presence of Pt(II), Pd(II), Ru(II), and Au(III) chlorides. Although more limited, AgOTf also catalyzes the cyclization. Usually, PtCl2 as the catalyst in methanol or acetone gives the best results. The reaction proceeds by exo attack of the allyl nucleophile on the alkyne to form five- or six-membered ring carbocycles. The reaction generally proceeds with anti stereoselectivity. However, a terminally substituted trimethylsilyl derivative reacts by a syn-type addition. The intermediate alkenylpalladium complex has been trapped with allyl chloride to form an allylated derivative with an additional carbon-carbon bond.     

Cooperative effects in phospholipid monolayers induced by a peptide from HIV-1 capsid protein

The study of interactions between biological molecules and model membranes is essential for the understanding of a number of physiological mechanisms involved in viral infections and dissemination. In this paper, the analysis of the interaction between a peptide from the p24 protein of Human Immunodeficiency Virus type 1 (HIV-1) and a phospholipid monolayer has pointed to a cooperative response in which very small amounts of peptide p24-1 (e.g. 0.05 mol%) can lead to measurable effects. Monolayer surface pressure and surface potential isotherms were affected for peptide concentrations as low as 0.05 mol%, with saturation at 0.5 mol%. The expansion effect from p24-1 is confirmed by changes in morphology of the monolayers using Brewster angle microscopy. Even though p24-1 is disordered in aqueous solutions, the interaction with dipalmitoyl phosphatidylcholine (DPPC) causes it to adopt an alpha-helix structure, as shown by circular dichroism (CD) data for multilamellar vesicles (MLV). The expansion of the phospholipid monolayer in a cooperative way may imply that p24-1 has potential antiviral activity, by participating in the cell rupture, with no need of specific receptors in the membrane.     

First synthesis of pyrrolothiadiazinones. An alternative core ring for xanthine based structures

The first synthesis of pyrrolothiadiazine core ring bearing substituents at positions 1, 3 and 6 is described, using a straightforward synthesis from diversely substituted 5-methylthiadiazines. These structures are of interest not only because they can be considered as useful building blocks but also because they can potentially be used as alternative core rings for biologically important molecules bearing xanthine as a central core.     

Behavior of Humic Acid as a Micellar Phase in Micellar Electrokinetic Chromatography (MEKC)

The possibility of humic acids acting as micellar phase in micellar electrokinetic chromatography was evaluated. We investigated the separation of naphthalene in capillary electrophoresis using various samples of humic acids as micellar phase under different pH conditions, concentrations of humic acid, and temperature. The humic acid samples studied were from different origins including peat, vermicompost and a commercial sample acquired from Aldrich. Methanol was used as a marker for the electroosmotic flow. The results indicate that the formation of micelle depends on the number and nature of the hydrophobic association sites in an aqueous humic acid solution and on the origin and concentration of the humic acid at a defined pH. At lower pH values, the possibility of the humic acid molecule forming pseudomicelles increases due to a combination of neutralized and dissociated charged sites.     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.