Effect of the Mixture Composition on Shear and Extensional Rheology of Recycled PET and ABS Nanocomposites

Summary: Recycled PET as well as ABS - organomodified montmorillonite nanocomposites were prepared via melt compounding in a counter-rotating twin screw extruder. The topological changes in polymer matrices as dependency on clay modification have been evaluated from dynamic experiments in the shear flow using low amplitude oscillatory measurements. Flow characteristics of all studied organoclay nanocomposites showed shear-thinning behavior at low frequencies. Filling of PET with some organoclays led to degradation reactions, which were reflected by lower magnitudes of viscosity and storage modulus in the range of higher frequencies as compared to unfilled polymer matrix. On the contrary, no degradation during the processing of different organoclays with recycled ABS has been observed.     

Synthesis of novel azanorbornylpurine derivatives

Azanorbornylpurine derivatives were prepared by Mitsunobu reaction of appropriate hydroxyazanorbornane derivative with 6-chloropurine or construction of purine base at azanorbornylamines. The prepared target compounds were evaluated for antiviral activity and effect on neuronal and muscle nicotinic acetylcholine receptors.     

1,3-Dipolar cycloadditions of new 2,5-bifunctionalized five-membered cyclic nitrones

A new family of five-membered cyclic nitrones bearing functional groups at positions 2 and 5 were tested in 1,3-cycloadditions with various dipolarophiles. These reactions gave the corresponding cycloadducts as single diastereomers in high yields. The reaction scope was examined, 23 compounds were isolated and fully characterized. The comparison of the reactivity was carried out by a study of reaction conversions while different nitrones or dipolarophiles were used. In addition, the exceptional reactivity of nitrone bearing benzylamino group in position 2 was studied. The formation of the nitrone complex and evaluation of its reactivity in 1,3-DC is presented.     

Influence of the variable wall thickness of the sample tubes and a quartz Dewar on the EPR signal intensity in a single TE102 and double TE104 rectangular cavity

The response of a single TE₁₀₂ and double TE₁₀₄ rectangular cavity to the insertion of samples contained in tubes with variable wall thickness and a quartz Dewar into the cavity has been analyzed. A direct, indirect, and concurrent (positive or negative) “lens effect” inside the double TE₁₀₄ rectangular cavity is discussed. The experimental dependence of the EPR signal intensity on the wall thickness of the sample tube, δ, for the line-like samples with identical length of the sample material column, L=30 mm, recorded in the microwave cavity showed a directly proportional increase of the relative “lens effect” with the increase of the wall thickness of the tube in the interval, δ∈<0.1 mm, >0.5 mm. The insertion of the variable-temperature double-wall quartz Dewar (home-built, resonant frequency shift, ca. −300 MHz) into the single TE₁₀₂ rectangular cavity showed the same relative “lens effect”, with ca. 1.5-time increase of the EPR signal intensity, for a point-like sample and the line-like samples with material columns of diameter of 1 and 1.3 mm, and wall thickness of the sample tubes, δ∈<0.1 mm, >0.5 mm. The increased effect of the Dewar arises because the active volume of the quartz Dewar tube walls is always much more larger than the active volume of the sample tube wall. In the case of the double TE₁₀₄ rectangular cavity, the insertion of the quartz Dewar: (i) into the same cavity, in which the sample is present, caused a direct “lens effect”, with ca. 1.8-fold increase of the EPR signal intensity; however, (ii) into the complementary cavity, in which the sample is absent, caused an indirect “lens effect”, with ca. 0.6-fold decrease of the EPR signal intensity. With the Dewar and sample in one cavity and a large empty sample tube in the complementary cavity, a concurrent (positive or negative) “lens effect” can be observed. Thus, the possible increase/decrease of the EPR signal intensity depends on the volume ratio of the quartz Dewar tube walls and large sample tube wall inserted into the double TE₁₀₄ rectangular cavity. Each of the above phenomena may be a significant source error in quantitative EPR spectrometry unless the samples to be compared in the quantitative EPR analysis are contained in sample tubes having the same wall thickness and each EPR spectra should be recorded inside an identical quartz Dewar.     

Ferromagnetism in a dinuclear nickel(II) complex containing triethylenetetramine and tricyanomethanide

Triethylenetetramine (L(4)) was used as a tetradentate blocking ligand that, after complexation with Ni(II), leaves two sites ready for ligation with tricyanomethanide. The formed binuclear complex [L(4)Ni(NCC(CN)CN)(2)NiL(4)](ClO(4))(2) exhibits a ferromagnetic coupling with J/hc = +0.15 cm(-1) and g(Ni) = 2.126; below 16 K, a ferromagnetic ordering is evidenced by ac magnetic susceptibility (both in-phase and out-of-phase), magnetization, field-cooled magnetization, and zero-field-cooled magnetization measurements.     

Synthesis and Photophysical Properties of Multichromophoric Carbonyl‐Bridged Triarylamines

The synthesis and photophysical properties of two novel multichromophoric compounds is presented. Their molecular design comprises a carbonyl‐bridged triarylamine core and either naphthalimides or 4‐(5‐hexyl‐2,2′‐bithiophene)naphthalimides as second chromophore in the periphery. The lateral chromophores are attached to the core via an amide linkage and a short alkyl spacer. The synthetic approach demonstrates a straightforward functionalization strategy for carbonyl‐bridged triarylamines. Steady‐state and time‐resolved spectroscopic investigations of these compounds, in combination with three reference compounds, provide clear evidence for energy transfer in both multichromophoric compounds. The direction of the energy transfer depends on the lateral chromophore used. Furthermore, the compound bearing the lateral 4‐(bithiophene)naphthaimides is capable of forming fluorescent gels at very low concentrations in the sub‐millimolar regime whilst retaining its energy transfer properties.     

Effect of temperature on the equilibrium and kinetics of galactose,glucose, and lactose adsorption on a cation exchanger

Galacto-oligosaccharides are typically produced by an enzymatic reaction when the post-reaction mixture contains considerable amounts of lactose and glucose and a smaller amount of galactose. In order to develop a process of chromatographic removal of saccharide impurities, adsorption equilibria and kinetics of these di- and monosaccharides were investigated for Diaion UBK 530, an industrialgrade strong cation-exchanger in the Na⁺ form. Frontal chromatographic experiments were carried out in the temperature range of 30–70°C and a broad interval of saccharide concentrations up to 350 g L^?1. Breakthrough curves were described using the equilibrium-dispersive model with the linear adsorption isotherm. Both the distribution and the axial dispersion coefficient values depended on the saccharide molecule type and size. No significant effect of temperature or concentration on the distribution coefficient was observed. The apparent dispersion coefficients of all saccharides exhibited some decrease with the temperature, which was caused by the decrease of the intraparticle mass transfer resistance. An analysis showed that both the intraparticle mass transfer and the axial dispersion had a significant influence on the front dispersion.     

Using controlled radical polymerization to confirm the lower critical solution temperature of an N‐(alkoxyalkyl) acrylamide polymer in aqueous solution

N‐(3‐Methoxypropyl) acrylamide (MPAM) was polymerized by controlled radical polymerization (CRP) methods such as nitroxide‐mediated polymerization (NMP) and reversible addition–fragmentation chain‐transfer polymerization (RAFT). CRP was expected to yield well‐defined polymers with sharp lower critical solution temperature (LCST) transitions. NMP with the BlocBuilder (2‐([tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino]oxy)‐2‐methylpropanoic acid) and SG1 ([tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino] oxidanyl) initiating system revealed low yields and lack of control (high dispersity, ? ～ 1.5–1.6, and inhibition of chain growth). However, RAFT was far more effective, with linear number average molecular weight, , versus conversion, X, plots, low ? ～ 1.2–1.4 and the ability to form block copolymers using N,N‐diethylacrylamide (DEAAM) as the second monomer. Poly(MPAM) (with = 13.7–25.3 kg mol^?1) thermoresponsive behavior in aqueous media revealed cloud point temperatures (CPT)s between 73 and 92 °C depending on solution concentration (ranging from 1 to 3 wt %). The and the molecular weight distribution were the key factors determining the CPT and the sharpness of the response, respectively. Poly(MPAM)‐b‐poly(DEAAM) block copolymer ( = 22.3 kg mol^?1, ? = 1.41, molar composition F_DEAAM = 0.38) revealed dual LCSTs with both segments revealing distinctive CPTs (at 75 and 37 °C for poly(MPAM) and poly(DEAAM) blocks, respectively) by both UV–Vis and dynamic light scattering. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 59–67     

Orchestrating the Biosynthesis of an Unnatural Pyrrolysine Amino Acid for Its Direct Incorporation into Proteins Inside Living Cells

We here report the construction of an E. coli expression system able to manufacture an unnatural amino acid by artificial biosynthesis. This can be orchestrated with incorporation into protein by amber stop codon suppression inside a living cell. In our case an alkyne‐bearing pyrrolysine amino acid was biosynthesized and incorporated site‐specifically allowing orthogonal double protein labeling.     

Multicomponent Self‐Assembly with a Shape‐Persistent N‐Heterotriangulene Macrocycle on Au(111)

Multicomponent network formation by using a shape‐persistent macrocycle ( MC6 ) at the interface between an organic liquid and Au(111) surface is demonstrated. MC6 serves as a versatile building block that can be coadsorbed with a variety of organic molecules based on different types of noncovalent interactions at the liquid–solid interface. Scanning tunneling microscopy (STM) reveals the formation of crystalline bicomponent networks upon codeposition of MC6 with aromatic molecules, such as fullerene (C₆₀) and coronene. Tetracyanoquinodimethane, on the other hand, was found to induce disorder into the MC6 networks by adsorbing on the rim of the macrocycle. Immobilization of MC6 itself was studied in two different noncovalently assembled host networks. MC6 assumed a rather passive role as a guest and simply occupied the host cavities in one network, whereas it induced a structural transition in the other. Finally, the central cavity of MC6 was used to capture C₆₀ in a complex three‐component system. Precise immobilization of organic molecules at discrete locations within multicomponent networks, as demonstrated here, constitutes an important step towards bottom‐up fabrication of functional surface‐based nanostructures.