Performance evaluation of PVdF gel polymer electrolytes

A series of gel polymer electrolytes containing PVdF as homo polymer, a mixture of 1:1 Ethylene Carbonate (EC) : Propylene Carbonate (PC) as plasticizer and lithium-bistrifluoromethane sulphone imide [imide — LiN (CF₃SO₂)₂] has been developed. Amounts of polymer (PVdF), plasticizer and the imide lithium salt have been varied as a function of their weight ratio composition in this regard. Dimensionally stable films possessing appreciable room temperature conductivity values have been obtained with respect to certain weight ratio compositions. However, conductivity data have been recorded at different possible temperatures, i.e., from 20 °C to 65 °C. XRD and DSC studies were carried out to characterize the polymer films for better amorphicity and reduced glass transition temperature, respectively. The electrochemical interface stability of the PVdF based gel polymer electrolytes over a range of storage period (24 h – 10 days) have been investigated using A.C. impedance studies. Test cells containing Li/gel polymer electrolyte (GPE)/Li have been subjected to undergo 50 charge-discharge cycles in order to understand the electrochemical performance behaviour of the dimensionally stable films of superior conductivity. The observed capacity fade of less than 20% even after 50 cycles is in favour of the electrochemical stability of the gel polymer electrolyte containing 27.5% PVdF −67.5 % EC+PC −5% imide salt. Cyclic voltammetry studies establish the possibility of a reversible intercalation — deintercalation process involving Li⁺ ions through the gel polymer electrolyte.     

A 24-GHz Patch Array with a Power Amplifier/Low-Noise Amplifier MMIC

This paper presents an active patch array designed at 24 GHz. It can be used as a front-end component for a phased array. A series resonant array structure is chosen which is compact and easy excite. With 5 elements, the array proved a 12-dB antenna gain. A power amplifier and a low noise amplifier are designed on a single GaAs chip (PALNA). Bias switch is used in the PALNA, which greatly reduces the switch loss in a transceiver and increases the efficiency. 20-dB small signal gain is achieved in both power amplifier and low noise amplifier. The active patch array is built by the combination of the patch array and PALNA. The measured active gain of this antenna is 35-dB for the PA mode and 31-dB for the LNA mode. This active patch array can obtain an EIRP of 34 dBm with a total radiated power of 22dBm and a maximum PAE of 32%. To check the noise performance, we applied sources at both normal temperature and 77K (liquid nitrogen) and extracted the noise figure (3.5 dB) of the active antenna by the Y factor method. The results proved that the active antenna is working efficiently as both a transmitting and receiving antenna.     

Optimization of some parameters of the gas-flow cems detector measurement

The paper presents, in an abbreviated form, the results of some measurements which were carried out with the aim to obtain an efficient and stable performance of a helium gas-flow CEMS detector.     

Shedding light on the structure of a photoinduced transient excimer by time-resolved diffraction

Time-resolved single-crystal diffraction performed with synchrotron radiation shows that the 53(1) micros phosphorescent state, generated in the crystalline phase of trimeric {[3,5-(CF3)(2)Pyrazolate]Cu}(3) molecules by exposure to 355 nm of light at 17 K, is due to the formation of an excimer rather than the shortening of the intramolecular Cu...Cu distances within the trimeric units, or the formation of a continuous chain of interacting molecules. One of the intermolecular Cu...Cu distances contracts by 0.56 Angstroms from 4.018(1) to 3.46(1) Angstroms;, whereas the interplanar spacing of the trimers is reduced by 0.65 Angstroms; from 3.952(1) to 3.33(1) Angstroms. Density-functional theory calculations support the formation of a Cu...Cu bond through the intermetallic transfer of a Cu 3d electron to a molecular orbital with a large 4p contribution on the reacting Cu atoms.     

First results of investigation of radiation from positrons in a crystalline undulator

Radiation emitted by positrons moving in a periodically deformed crystal has been experimentally observed for the first time. Radiation spectra have been measured in a wide energy range. Experimental evidence has been obtained for an undulator peak in a radiation spectrum, which is qualitatively consistent with calculations. Crystalline undulators ensure an equivalent magnetic field of 1000 T and a period in the submillimeter range and can therefore be used to generate x-ray and gamma radiation that is a hundred times harder than radiation in usual undulators.     

Magnetic fluid poly(ethylene glycol) with moderate anticancer activity

Poly(ethylene glycol) (PEG)-containing magnetic fluids - magnetite (Fe₃O₄) stabilized by sodium oleate - were prepared. Magnetic measurements confirmed superparamagnetic behaviour at room temperature. The structure of that kind of magnetic fluid was characterized using different techniques, including electron microscopy, photon cross correlation spectroscopy and small-angle neutron scattering, while the adsorption of PEG on magnetic particles was analyzed by differential scanning calorimetry and Fourier transform infrared spectroscopy. From the in vitro toxicity tests it was found that a magnetic fluid containing PEG (MFPEG) partially inhibited the growth of cancerous B16 cells at the highest tested dose (2.1 mg/ml of Fe₃O₄ in MFPEG).     

Terahertz imaging through self-mixing in a quantum cascade laser

We demonstrate terahertz (THz) frequency imaging using a single quantum cascade laser (QCL) device for both generation and sensing of THz radiation. Detection is achieved by utilizing the effect of self-mixing in the THz QCL, and, specifically, by monitoring perturbations to the voltage across the QCL, induced by light reflected from an external object back into the laser cavity. Self-mixing imaging offers high sensitivity, a potentially fast response, and a simple, compact optical design, and we show that it can be used to obtain high-resolution reflection images of exemplar structures.     

Potential formation in a bounded two-electron temperature plasma system with floating collector that emits electrons

Formation of the plasma potential in a plasma that contains energetic electrons and is bounded by a floating collector that emits electrons is studied theoretically. The problem is treated by a static. kinetic plasma-sheath model of Schwager and Birdsall [Phys. Fluids B2 (1990) 1057], which we have extended in order to include additional energetic electron population. The distribution of these electrons is assumed to be a high-temperature Maxwellian. They are called hot electrons. In the paper we study effects of the density and temperature of the hot electrons on the formation of the plasma potential. The model shows that for certain densities and temperatures of the hot electron population plasmas with two different plasma potentials can coexist in the system. These two plasmas are separated spatially by a double layer. For the case when there is no emission of electrons from the collector, results of the model are compared with computer simulation and very good agreement between the model and the simulation is found. The simulation also confirms existence of two plasmas with two different potentials separated by a double layer.